connection Ralink wifi adapter problem, how to fix on a HP Pavilion g seris

Similar Questions

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• S205 Lenovo with RaLink 3090 series wifi adapter problems - update driver 3.2.1 solve?

  Hello.

  I just got the Lenovo S205 with RaLink 3090 series wifi card and had a steady decline until I downloaded the Version 3.2.1 update which was included in the link for the 309 X (X being 0 for me for my wifi card) software/drivers on RaLink site, under the Help menu.

  Go to ralinktech.com and go to Support > downloads > Windows and you will see a list of several RaLink devices which include the adapter X 309. I chose to download/install the full utility with the driver. I remember well, it may be more 28 megabytes.

  I hope it works for you!

  Update:

  I uninstalled the RaLink wireless utility that came with the 3.2.1 pilot, but it uninstalled the driver too. Then I reinstalled and activated the option "install driver only", went into the control panel > hardware and audio > Device Manager > network adapters >

  RALink RT3090 802.11n WiFi adapter > double-click to open the properties > power management tab > uncheck "allow this computer to turn off device to save energy ', 'OK', close and restart programs.

  So when I start or wake the system from sleep, I click the Wireless connections icon in the lower right (next), bar and then click on the link that I want to connect, and then click 'Connect' While it takes 8 seconds to connect, it is worth MUCH more that to have the connection drop constantly, and I probably reboot my system only once when he didn't to reconnect out of a State of sleep.

  I had a MUCH more homogeneous behaviour since this change, and I hope it works well for you too!

• Windows 8.1 slow wi fi - RT5390R bgn ralink WiFi adapter

  Hello. This problem started when I updated for windows 8.1 on my home office (which connects via wifi). It came with windows 8, but then I've updated in March for windows 8.1 after learning that wifi controllers have been updated. Since then, I had problems with the wireless network (problem comes and goes, but is unstable hightly).

  The most common problems I see is: slow network, very few reliable HTTP traffic (web pages does not display ok, does not load images or does not even load the web page, rror 404), sometimes it doesn't connect to my WIFI at home, 802.11n, as its configuration for authetication type WPA2-PSK.

  Note that if I connect using cable, it works well. Also, I find that if I connect to an unsecured network, 802. 11B it works fine. Another aspect to note is that whenever I see the problem (every 5 minutes), I usually run the ipconfig/flushdns and seems that he * temporarily * solves the problem, but then it happens again.

  In addition, the driver is supposed to be updated, I first tried one that has been recommended to HP, but since it has not solved the problem, I downloaded a newer version of the Ralink site, is dated April 4, 2014.

  This, of course, didn't happen before the update (I've updated in November, but has also broken the wi fi and after a problem, I decided to go back to windows 8 and worked normally) and also, I have a lot of devices that connect ok to the network (laptop computer, mobile phones, tablet, even a smart tv).

  I'm a guy experienced when it comes to problems with my desktop computer, but it's very strange and I blame windows 8.1!

  Does anyone have another suggestion?

  Something will help you. Thank you.

  The solution of "update drivers" failed. Also the "allow the computer to turn off device" did not work. The only thing that worked for me, it was implemented on the IPv4 settings manual DNS servers.

  After heavy, found research 8.1 windows handles DNS in different settings (why? hell I don't know), so I stumbled upon the following article http://adamralph.com/2014/01/24/continuously-losing-internet-connectivity-in-windows-8-1 , but did not fix. So, after banging my head against the wall, I decided to use my own ISP dns servers IP s and voila... it worked, after 4 months that I initially installed windows 8.1.

  Since the MS forum: http://social.technet.microsoft.com/Forums/windows/en-US/d799e421-c965-4b0c-9829-1dc2c37fbb58/windows-81-loses-internet-connectivity?forum=w8itpronetworking .

• Qualcomm, atheros AR9285 802.11b/g/n wifi adapter problem

  Hi, if I can connect to the internet, but after a bit, I'm disconnected from the network. When I have the Troubleshoot, it indicates that there is a problem with my card. It is not a problem with my network as all other devices work correctly.

  I use Windows 8; my laptop is a Pavilion dv6 - 3284ca; my wifi adapter is qualcomm, atheros AR9285 802.11b/g/n wifi adapt

  Let me know if you need more information.

  You can try a USB wireless adapter. If it works, which will restrict the cause root. If it doesn't, it will restrict the issue to a conclusion. There is not a lot of troubleshooting on the left that you don't want to, so I think that an adapter is a good idea.

  Mario

• HP EliteBook 2170p Wifi adapter problem

  My Elitebook 2170 p (Intel Centrino Advanced N6235) wifi adapter has a hardware problem, the driver is up-to-date. What should I do?

  Hello

  If it's a hardware problem confirmed, please contact personal HP for the service of the PC and have replaced defective parts.

• Controller of compatible host OHCI 1394 has a driver problem how to fix

  Compatible OHCI 1394 host controller has a driver problem

  This appears when I troubleshoot my laptop
  I need a solution, how to fix

  Sound your firewire controller, have you recently up from your sys drivers?

  You have visited your laptop to install the chipset and other decision makers support site relevant factors?

• 2230-N-Intel wifi adapter problem. stops on the map

  I just bought a laptop HP 17-j029nr.  He has a wifi card intel proset N-2230.  I have already returned your laptop under the return policy of 3 weeks for the same problem.  I didn't know what was wrong, then I discovered that the issue on the last day I could return it, so that seemed to be the best course of action.  The new laptop began to have much faster than the previous issue.

  The problem seems to not have a link with the windows updates, but not spend 8 to 8.1.

  In the beginning, everything is normal.  Good solid connection on my network for this device and all my devices.  Then, I lose the internet connection.  On the notifacation of wifi, there is a!, open it and it only shows my network, and it said limited.  I can ping all other computers on my network or my gateway, it seems that there is not any connection at all.  If I disconnect, then says no available networks.  A reboot will get me back online.

  Everything's fine again for 10 minutes up to 2 hours.  Then he repeats, said I have a metered, but I have no connection, and I have to reboot for it to come alive.

  A google search reveals that this is not a problem rare, nor specific to HP laptops.  He also had a decent knowledge base of solutions I've tried, all to nothing does not.

  I tried a few different versions of the driver.  First, I tried the latest version of the driver.  Then I tried all the drivers that were made for windows 8.1 64-bit.  I came across an ad that suggested using the Intel PROSet/Wireless WiFI connection utility.  I defy anyone to get this application installed right the first time.  My limited knowledge of windows 8.1, my networks are managed by this application.  The only reason why I believe that it is because it runs in my sandbox, and if I right click on it, it gives me the possibility to 'use windows to manage wifi"yet, my windows wifi Manager runs as well.  I can't understand how to disable wifi management service without disabling other services necessary to use the card.  So, Yes, I have something not configured correctly, but the behavior I get is the same.  After some time, whatever it is, makes my life hell, continues to occur.

  Any thoughts on why this is happening?

  Being a miniminalist, I try to remove all the junkware that comes with the computer.  One of the things that I removed has some star power demand.  He had the blue background with the White Star, the standard "Energy Star Rated" sticker on a device, you will see.  A quick search online doesn't have reviel a lot on the application, but immediately got me into the hell of Googling turning all kinds of results I don't care at all.  So I removed the program.

  Earlier I was in the properties of the device and I noticed the power management tab and behold, it has been verified to allow the computer to turn off the device to save power.  I don't know if this is the solution, but at least it's something.  I will update, and I promise with something better than, "nevermind, fixed it.

  -L' sad HP user

  New adapter wifi solved the problem. Too bad HP support sucks so I have to use different elements to get the machine to work.

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• HP ENVY 15 notebook PC TS: Ralink Wifi adapter

  I uninstalled to accidentlly the Ralink RT3290 802.11bgn Wi - Fi adapter on my computer, hp envy ts 15 portable x 64 bit, while trying to clean unnecessary files. I followed the instructions as to reinstall what I saw on the forums of the previous question. It did not work. My system wants to connect to broadband. I can't connect to any type of internet even if I try to use my mobile access point.

  I tried troubleshooting after I tried to reinstall the ralink but it is said that a cable must be connected.

  Help, please! This my only computer and I need for school.

  Hello

  You can try to install the driver Ethernet LAN wireless (WLAN) driver of the laptop Recovery Manager.

  Please see the instructions below:

  1.) press Windows + Q - key and in the search box, type Recovery Manager and press enter to open it.

  2.) I need help immediately, click on drivers and reinstall Applications and wait for the Recovery Manager to generate a list.

  3) 3) select the check box next to the drivers (Ralink) 802.11 b/g/n Wireless LAN (WLAN) card driver and Driver Realtek Local Area Network (LAN)) you want to reinstall and then click on the Install button at the bottom right and follow the on-screen instructions.

  4.) once the drivers are re-installed, restart the computer and check the functionality.

  The MediaTek (Ralink) 802.11 b/g/n Wireless LAN (WLAN) card driver is for the functionality of your laptop wireless and local area network (LAN) Realtek driver is for the connection of the Ethernet cable to your laptop.

  And only if you have access to another PC which is able to go online and then, please check the link below to download the latest version (check date) MediaTek (Ralink) 802.11 b/g/n Wireless LAN (WLAN) card driver and Driver Realtek Local Area Network (LAN).

  Download drivers

  Click on the white thumb to say thank you *.
  Please check accept as Solution if it solves / answers your problem *.
  I am an employee of HP, but I am speaking for myself and not for HP or Others.* *.

• HP pavilion 15e006tu Ralink RT: blutooth drivers and lan. my computer laptop id - Ralink WiFi adapter Version RT3290802.11bgn - 5.0.27.0

  Adapter bt's wifi ralinkRT 3290802.11bgn version 5.0.27.0

  Hello:

  Here are links to drivers Ralink W10 WiFi and bluetooth...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150624_1

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150748_1

• pop up on the display screen to voluum/caps lock/internet connection disappeared after update. How to fix?

  Fujitsu siemens amilo laptop

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• I am connected with a temp profile - how to fix this?

  

  I have a HP Touchsmart 520 with windows 7. I just connected and the following message appears:

  You have logged on with a temporary profile.  You can't access your files and files created in this profile will be deleted when you close the session.  To resolve this issue, log off, then try to connect later.  Check the log of the events for more information or contact your system administrator.

  I'm the only person who uses the PC and I'm at a loss of what to do, such as logging and the new makes no difference.  Could someone help a beginner full who doesn't have a clue what to do next!

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• startup problem: how to fix the optical drive?

  My sister asked me to install a new copy of windows. First I tried to put the win7 dvd in the drive, it does not display the traditional press any key to boot from the cd/dvd. then I changed the settings in bios to boot from the cd, which gave no result. then I tried the boot to the optical drive option, it just went ahead and started from the hard drive. I thought it would be the dvd, the same results from a winxp cd. My next thought was the drive, it normally detected a bunch of random but refused to thank DVD that has the existence of a windows install disk. Please someone help stop harassing my sister

  You can try this first: http://arstechnica.com/business/news/2009/12/-the-usb-flash-drive.ars

  Install the system and then study what is the problem with the optical drive. Make sure that it has the latest version of the BIOS...

• Casting poses a problem-how to fix?

  Response to a question I asked in April (see Deanglicise? Deamericanize? I have this function that takes in a string such as "publicize, promote, assign, italicize ' and spit on"publish, assign", removing redundant duplication of the suffix - ise, - IZE:
  

  create or replace function deise (instring varchar2)
  return varchar2
  is
         v_outstring         varchar2(32000);
  begin
  WITH T AS
     (SELECT  1 rn , instring
         TXT
            FROM DUAL)
  select  substr( string, 2 ) into v_outstring
  from (
   select TXT ,  rn,  pos, row_number()over(partition by regexp_replace(txt,'[ize|ise]') order by pos ) n
             from ( SELECT   TXT ,  rn, position pos
                 FROM   T
                       MODEL
                       RETURN UPDATED ROWS
                       partition by ( rn)
                       DIMENSION BY (0 POSITION)
                       MEASURES     (TXT , NVL(LENGTH(REGEXP_REPLACE(TXT,'[^,]+','')),0)+1 NB_MOT)
                       RULES
                         (TXT[FOR POSITION FROM  1 TO NB_MOT[0] INCREMENT 1] =
                        REGEXP_SUBSTR(TXT[0],'[^,]+',1,CV(POSITION)) )) t)
  where n=1
  model
  return updated rows
  partition by ( rn )
  dimension by ( row_number() over (partition by rn ORDER BY pos ) as position )
  measures ( cast( txt as varchar2(4000) ) as string )
  rules
  upsert
  iterate( 1000 )
  until ( presentv(string[iteration_number+2],1,0) = 0 )
  ( string[0] = string[0] || ',' || string[iteration_number+1] )
  order by rn;
  return v_outstring;
  end;

  Works very well, in general. Sometimes, however, I have "ORA-25137 Data Value Out of Range" errors and the line it lists as being at fault is the one who reads the measures (cast (txt as varchar2 (4000)) as String).
  
  I tried that bump up varchar2 (8000) or, indeed, to varchar2 (4001), but he refuses to accept anything more than 4000. (He is 10 g Release 2, 10.2.0.4).
  
  Is there a simple way to rewrite this function so that the casting is possible (for example) a CLOB?

  Catfive Länder wrote:
  Well, this certainly seems to be (a) a much simpler code, and (b) very successful code! The outputs seem appropriate for any entry that I could throw at it, although I'll have to do some tests much more, of course. :-)

  I realize, I push at this point, but could you maybe explain what you consider bad/excessive/redundant on the original code? I am at a loss to understand why the initial necessary so casting further suggestion / what do you have when you seem able to drop it and achieve the same type of result. Not really to be a developer of any sort (Tubby, take note!), I'm really not in a position to judge if this is 'just' compared to the original, and your ideas as to why this code all that is needed, and the original is excessive or inefficient would be useful, I think.

  Basically, MODEL is a new feature and I'm not an expert in it. But without a doubt your condition does not require the use of the MODEL clause. A simpler approach more is enough.

  (Salim champion) who offers the MODEL approach just like the TYPE clause (not saying anything wrong thereon) and tend to solve the whole problem with him;).

  Now, I would like to add to your comments on suggestion of francs.

  I personally don't think it's a bad idea. Why?

  1 SQL is basically a language used to work with data stored in the table.
  2. your condition does no table or the data in the DB. It requires even a DB.

  I think that your understanding of the rule of Tom is incorrect. He suggested that, especially when you're dealing with stuff with database.

  You condition does not require a database. If I where a java developer, I would in a java code Miss to make a call from DB. The call to DB it would be much more expensive than code written in Java.