HP EliteBook 2170p Wifi adapter problem

Similar Questions

• Qualcomm, atheros AR9285 802.11b/g/n wifi adapter problem

  Hi, if I can connect to the internet, but after a bit, I'm disconnected from the network. When I have the Troubleshoot, it indicates that there is a problem with my card. It is not a problem with my network as all other devices work correctly.

  I use Windows 8; my laptop is a Pavilion dv6 - 3284ca; my wifi adapter is qualcomm, atheros AR9285 802.11b/g/n wifi adapt

  Let me know if you need more information.

  You can try a USB wireless adapter. If it works, which will restrict the cause root. If it doesn't, it will restrict the issue to a conclusion. There is not a lot of troubleshooting on the left that you don't want to, so I think that an adapter is a good idea.

  Mario

• connection Ralink wifi adapter problem, how to fix on a HP Pavilion g seris

  My Hp laptop does not connect to internet, it has the following wifi adapter. How can I solve this problem. RalinkRT5390 802. 11 b/g/n

  Hello:

  Are the rest of your PC / devices connected to the internet?

  If Yes, try to install the latest driver and see if that helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=VC-91565-1&mode=4&IDX=2

  If you have no other wireless devices to test, restart your modem and router, and you must do it in a certain way.

  1. close all PC.

  2. turn off the modem and the router.

  3. turn on the modem only.  Wait about 2 minutes.

  4. turn on the router. Wait about 2 minutes.

  If you have a modem/router combo, then you need not step 4.

  5. start the PC and see if you can connect.

  Paul

• S205 Lenovo with RaLink 3090 series wifi adapter problems - update driver 3.2.1 solve?

  Hello.

  I just got the Lenovo S205 with RaLink 3090 series wifi card and had a steady decline until I downloaded the Version 3.2.1 update which was included in the link for the 309 X (X being 0 for me for my wifi card) software/drivers on RaLink site, under the Help menu.

  Go to ralinktech.com and go to Support > downloads > Windows and you will see a list of several RaLink devices which include the adapter X 309. I chose to download/install the full utility with the driver. I remember well, it may be more 28 megabytes.

  I hope it works for you!

  Update:

  I uninstalled the RaLink wireless utility that came with the 3.2.1 pilot, but it uninstalled the driver too. Then I reinstalled and activated the option "install driver only", went into the control panel > hardware and audio > Device Manager > network adapters >

  RALink RT3090 802.11n WiFi adapter > double-click to open the properties > power management tab > uncheck "allow this computer to turn off device to save energy ', 'OK', close and restart programs.

  So when I start or wake the system from sleep, I click the Wireless connections icon in the lower right (next), bar and then click on the link that I want to connect, and then click 'Connect' While it takes 8 seconds to connect, it is worth MUCH more that to have the connection drop constantly, and I probably reboot my system only once when he didn't to reconnect out of a State of sleep.

  I had a MUCH more homogeneous behaviour since this change, and I hope it works well for you too!

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• 2230-N-Intel wifi adapter problem. stops on the map

  I just bought a laptop HP 17-j029nr.  He has a wifi card intel proset N-2230.  I have already returned your laptop under the return policy of 3 weeks for the same problem.  I didn't know what was wrong, then I discovered that the issue on the last day I could return it, so that seemed to be the best course of action.  The new laptop began to have much faster than the previous issue.

  The problem seems to not have a link with the windows updates, but not spend 8 to 8.1.

  In the beginning, everything is normal.  Good solid connection on my network for this device and all my devices.  Then, I lose the internet connection.  On the notifacation of wifi, there is a!, open it and it only shows my network, and it said limited.  I can ping all other computers on my network or my gateway, it seems that there is not any connection at all.  If I disconnect, then says no available networks.  A reboot will get me back online.

  Everything's fine again for 10 minutes up to 2 hours.  Then he repeats, said I have a metered, but I have no connection, and I have to reboot for it to come alive.

  A google search reveals that this is not a problem rare, nor specific to HP laptops.  He also had a decent knowledge base of solutions I've tried, all to nothing does not.

  I tried a few different versions of the driver.  First, I tried the latest version of the driver.  Then I tried all the drivers that were made for windows 8.1 64-bit.  I came across an ad that suggested using the Intel PROSet/Wireless WiFI connection utility.  I defy anyone to get this application installed right the first time.  My limited knowledge of windows 8.1, my networks are managed by this application.  The only reason why I believe that it is because it runs in my sandbox, and if I right click on it, it gives me the possibility to 'use windows to manage wifi"yet, my windows wifi Manager runs as well.  I can't understand how to disable wifi management service without disabling other services necessary to use the card.  So, Yes, I have something not configured correctly, but the behavior I get is the same.  After some time, whatever it is, makes my life hell, continues to occur.

  Any thoughts on why this is happening?

  Being a miniminalist, I try to remove all the junkware that comes with the computer.  One of the things that I removed has some star power demand.  He had the blue background with the White Star, the standard "Energy Star Rated" sticker on a device, you will see.  A quick search online doesn't have reviel a lot on the application, but immediately got me into the hell of Googling turning all kinds of results I don't care at all.  So I removed the program.

  Earlier I was in the properties of the device and I noticed the power management tab and behold, it has been verified to allow the computer to turn off the device to save power.  I don't know if this is the solution, but at least it's something.  I will update, and I promise with something better than, "nevermind, fixed it.

  -L' sad HP user

  New adapter wifi solved the problem. Too bad HP support sucks so I have to use different elements to get the machine to work.

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• HP Folio 9470 m Elitebook questions Wifi adapter! CODE 10 - NETWORK CARD DOES NOT START

  My laptop recently received windows 8 is installed. He had previously ubuntu (linux).  Now, when I connected and activated windows, the custom of Wifi and shows the x on this subject. I installed the new Qualcomm Atheros driver and now when I check the driver in Device Manager it has an exclamation mark on it. When I went to the properties, it says code (10) - NIC was able to start. Why is this?

  Solved! I found my most recent drivers for the WIFI chip and installed all the! IM SO HAPPY AND WINDOWS 8 IS REALLY AWESOME! GLORY!

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• Update the offsets of wifi driver WiFi Ralink 802.11 adapter problem b/g/n after Windows 8

  Hello

  I recently experience this terrible problem with my Wifi, everything used to work fine until a recent Windows 8 update (I don't remember which exactly) because I thought that the problem is related to my antivirus or I need to reinstall my windows because its gets lag

  The problem is that the Dungeon of Wifi that come and go, which causes terrible lag and crashes when I try to play games online such as Dota2 or other

  Please check this picture: http://i.imgur.com/U0Ns0Yw.png

  the photo shows the behavior of the Wifi during an online game, it continues to go up, then down to ZERO (here when he lags behind in the game) then reassemble and so on

  I tried several versions of the driver already installed later did nothing, installed the older... still nothing works.

  Notes:

  -the problem is not due to my router, I checked with my other PC and it work perfectly without delay whether

  -my laptop is a HP Pavilion 2212ek g6

  -Currently, I installed the latest version of Ralink 802.11 b/g/n WiFi adapt Driver 2013-04-27, Version5.0.25.0

  -My wireless card is: Ralink RT3290 802.11bgn wifi adapter

  anyone with the same problem as me? anything to solve this problem? Help, please!

  Thank you very much

  Hello

  I think that I sloved the problem, after a morning of messing around with drivers and reboots

  the trick is to go to the

  1 - Control Panel

  2 - Click on hardware and sound

  3. in the devices and printers click on 'Device Manager '.

  4. in the "Device Manager" click on "network adapters" then right-click on the ralink 802.1bgn wireless adapter, then click 'properties '.

  5 - go to advanced

  6 choose the sensitivity of homelessness

  7 - change the Disable value

  that worked for me, hopefully it do the same for you

• Ongoing problem with my Netgear WiFi adapter and hardware software.

  Please help me solve this problem, which still exists.  I even once contacted NETGEAR, but they say it's a problem for six months and it is only cosmetic in that the adapter Netgear WIFI does his job, despite the failure of the adapter Netgear WIFI Wizard appears immediately except to re - install via CD Netgear...  Read on: Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.
  Thank you very much.
  Joe

  Hello

   
  Have you tried the steps suggested by John from the link below?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/when-i-try-to-run-NETGEAR-software-for-use-with-my/ae7ae3be-BE62-4742-b9fd-1cf4b8dc3124
   
  If so, then share the results on this thread.

• Problems with wireless WIFI adapter. DWA-130 | Windows 7

  Hello

  I did a post on this a few months back and it has been partially resolved; I tried to get my wireless to work on Windows 10 WIFI adapter and the people trying to help me as I discovered that 10 Windows does not have to support the device.

  Now, I have a new problem. I recently, and recently I mean today, reformatted for Windows 7 because I'm not a big fan of Windows 10 (which is not because of my WIFI adapter doesn't work do not, it is mainly because of all the glitches that come with Windows 10 because it is so new). Sort of, I tried to install my WIRELESS card on my Windows 7 Desktop, and everything I did (I honestly don't know) I can't make it work... And here, if possible, why...

  

  I think that the "unknown device" could be my adapter. If so, that would mean he has not installed correctly and therefore is not working right (or not at all, in this case).

  How can I remove from my device manager? I have already used "uninstall Device Driver", and he says it uninstalls, but once I update the list, he's back again, this time with no way to uninstall it - I have to reboot the machine and then the option will pop up but then if I refresh it, it'll be welcome back here - now, it will not disappear.

  My WIFI adapter is called "DWA-130" and the model number would be "DWA-130F1.

  Help would be very appreciated.

  The problem has been resolved.

  Thanks for any help, in the end, I copied files from disks on my desk (before copying them, I just tried to use the DISK itself), then I went in "Devices and printers" clicked on my device (the "802.11 n WLAN [DWA-130]"), then went to "Device properties" and "Update Driver". I went to my office through the teleprompter and then when I was in the files on the disc, I went into the folder "Setup" and you press 'OK', in which he finally started to install the necessary drivers and you read this, I use my wireless adapter to access my internet.

  One thing to note;

  Once it was installed, I went to the 'map settings' to connect to a preferred network, and some networks were visible. So I had to add mine in manually, once I added it manually, the WIFI indicator on my taskbar, when I opened it, all the other networks in my neighborhood was now visible as well.

  I hope I helped someone with problems.

• Access WiFi Limited, problem with Wifi adapter

  Original title: wifi access

  my laptop recently having limited wifi access issue. I tried troubleshooting, but it did not help. It comes up with a window saying there is a problem with my wireless card. I checked the wifi card in the Device Manager and it says that the equipment did not work properly. then I tried uninstalled and reinstalled, but the problem is not fixed. my card is atheros ar9485 qualcomm (im using os win 8). I searched online and some people having problems of this ar9485 as well. then I updated the NIF of the driver file, but the problem still exists. im going to be crazy now. could you please help me out of it? much appreciated!

  Hello

  What is the brand and model of the laptop?

  There could be a problem with the driver for the wireless network connection card.

  Kindly, follow these steps and check if that helps.
  Method 1:

  If you get an error 'problem with my wifi adapter', please uninstall and reinstall the wireless card driver. Check with your computer manufacturer or the manufacturer of your wireless (Atheros) adapter and make sure you have the latest driver available for the card.

  Follow these steps:
  First, download the latest driver for network card wireless from the manufacturer's Web site.
  a. to uninstall the card, then press X and Windows on the screen. Click on Device Manager.

  b. locate network card and expand the driver icon.

  c. right-click on the icon of the Atheros wireless driver and click Uninstall.

  Follow the instructions on the screen to uninstall the driver.

  d. open the folder that contains the installation file of the latest driver that you downloaded.

  e. double-click the Setup file and follow the instructions on the screen to install the NIC driver

  You can try some troubleshooting section:
  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Method 2:
  You can also reset TCP/IP manually.

  Follow these steps:

  a. press the Windows key (enter the splash screen), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the laptop.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• RALink RT5390 802.11/b/g/n WiFi adapter 5.0 ghz problem

  I have a laptop DV7 - 6113cl. It has a Ralink RT5390 802.11/b/g/n WiFi adapter and I can't connect to my wifi 5.0 ghz router. I can only connect to my 2.4 ghz router, the router is an Asus RT-N56U Dual Band router 802. 11 g/b/n /.

  The 2.4 ghz is 802. 11 g/b

  the 5.0 ghz is 802.11 n/a.

  Please help me, I need to connect to the 5.0 ghz because the 2.4 ghz signal is only 1 bar if im in my room.

  Ralink RT5390 is 2.4 GHz only.

  Try to move your router or by assigning a different channel.

  Banhien is only partially correct. While 802. 11A works on 5 GHz, you have reason to believe that 802.11n can do 2,4 or 5.

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul