s5220y: installation of a nic card

Similar Questions

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• 10/100/1000 gigabit NIC card

  I just got this a few days ago:

  Model No.: 400-224
  Product #: F3D64AA #ABA
  Series No.: [edited by Moderator]
  Software update #: 14AM1RRA603 #SABA #DABA
  Service ID #: 20140511
  PCBRAND #: HP

  I just upgraded to FiOS Internet speeds up to 150 Mbit/s/65 MB/s...

  My speed is nearly 90... They recommend obtaining a card NIC 10/100/100...

  My questions:

  What (netword card?) can I?

  Can buy a NIC card to put in it?

  Thank you

  Hi jojohammer,

  Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information such as the serial number in your message. Our Participation rules:
  
  Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.
  
  If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.
  
  Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.
  
  Thank you
  George

• ACS SE and NIC cards

  After reading the documentation on NIC cards on the GBA unit, it seems that the two cannot be used together. One is usable as a Management Interface like on CS-MARS and IPS? While the other performs its normal functioning?

  Unfortunately no, you can use a NETWORK card that too low (NIC 1) NETWORK interface card.

  If you want such a feature, you can contact your AM and go for a feature on this product request.

  Kind regards

  Prem

  Please rate if this can help!

• Need a driver for my wireless nic card

  I have a wireless nic card and cannot find a driver for windows 8. I don't know what brand or any info about this card because windows XP always loading a driver. How will I know what it is if I can find a driver for the card?

  Hey Rodney,

  Here's a suggestion to identify your wireless NETWORK card:

  1. [Win] + X
  2. Device Manager
  3. Right click on your NETWORK adapter
  4. Select Properties
  5. Go to the Details tab
  6. Select the hardware ID in the drop-down list of the property
  7. Right-click on the 2nd line of the value box
  8. Select copy
  9. Open your favorite Web browser
  10. In the search box, paste the value copied to the #8
  11. ...

  Once you have identified the manufacturer of your NETWORK card & model see the manufacturer's Web site to try to find the appropriate driver. Alternatively, you can also search on http://catalog.update.microsoft.com.

  If Windows 8 cannot find a driver for your NETWORK card automatically, I guess it's because it's an old. So I expect that you will not find a driver for Windows 8. If you find a Windows Vista or Windows 7 driver, they should work. Also, during the research for a driver to pay attention to the version (x 32 / x 64) as it should match your version of Windows 8.

  Hope this helps at & answers your question. If you have a problem with this answer please you with:

  • Version of Windows 8 (x 32 / x 64)
  • Manufacturer of PC & model
  • NIC (#8 above value) hardware ID

  and I'll see what I can do when I have a moment.

  See you soon

  LZ.

• CentOS 5.8 32 bit OS does not show the VMXNET3 nic card

  We have an activity reclassification e1000 nic to VMXNET3 on all servers in our environment. We have successfully upgraded to RedHat 5 32 bit to vmxnet3 e1000 nic cards, but we are unable to do so in CENTOS 5.8 32bits. Vmxnet3 is compatible bits centos 5.8 32.

  VMTools are up-to-date and H/W is 7.

  Let me know what should I check other than that and how do I solve the problem?

  Fixed the problem by selecting the correct name of the virtual machine.

  Here is the link

  Documentation for VMware for CentOS 5

• Is it possible to get use of the virtual machine Nic cards?

  Hi all

  I would like to know if there is possible to get the nic card (objectNetworkAdapterImpl ) send/receive rates of VM through the cmd-lets get-stat statistical data?

  Concerning

  Danny

  I decided to do a blog on it.

  See vNIC send and receive rates

• Installing additional NIC cards ESX 4i

  Hello

  I would like to install very cards on my ESX Server, this will be used for the backup.  The new NIC card is identical to the NETWORK card of filtration in the system (NC375T).  What commands should I deliver to ensure that ESX 4i is able to see the new maps.

  Thank you

  Hello

  You can check if the new adapter is installed well with VI Client > host VMware > Configuration > network card

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• Host with 2 NIC cards

  I have a host with 2 NIC cards.  I created a Windows prompt with 2 NIC cards.  I would like to bind each NETWORK card on the client to a different physical NICS on the host.  Is there a way to do this?  They always end up both bind to the same network adapter.

  Hello.

  You can do it.  Assuming that you have a Windows host, make sure that VMWare bridge Protocol is linked both to the network adapters on the host.  Then, use the VMware virtual network Editor to set VMnet0 until the bridge at 1 on the network adapters on the host.  Vmnet2 or another unused to the bridge on the other network adapter for the host.

  Good luck!

• NIC card does not address IP

  Hello

  Personal tech support Verizon told me that the NETWORK card in my Dell computer does not respond to that was the reason why I can't connect to the internet, not from without wireless or ethernet cable.

  We treid to turn off then turn on, that has not worked.  We then tried uninstalling, reboot to reinstall.  Once the computer restarts the NIC card has been reinstalled.  You can see in the hardware device manager, but do not yet have the IP address.

  When I go into network connections configuration panel.  I can see LAN showing the connection to the LAN - connected.  Connection network Intel (r) PRO/1000MT, but when I click on help, the connection status is completely empty. When I click Repair, I get the following message:

  Windows could not finish repairing the problem because the following action cannot be completed: didn't query the connection TCP/IP parameters.  Cannot continue.

  Can anyone help?

  My computer system:

  Intel OptipleX gx270s

  Intel Pentium 4

  Processor 2.4 Ghz 2.39 GHz

  1.00 GB of Ram
  Intel (R) PRO/1000MT network

  Thank you very much.

  
  

• installation of vsphere, nic does not dhcp, static ip specifies tests ok with network test - no network connectivity

  I'm new to esx and don't know how to solve this. could someone help?

  installed a new Intel PRO/1000 PT Svr Adp (. MFR manufacturer: EXPI9400PT) during the installation of vsphere, the network card is installed, the possibility of dhcp or static. States of DHCP server cannot be contacted the dhcp - (dhcp is on the network), static assign and click the button 'test network', which States the test then managed. This network adapter selection red x indicating disconnected. installation is complete, restart and unable to access the host.

  Start the webaccess service cannot connect to the host via port 80 is open, try ssh firewall, unable to connect.

  card moved unsuccessfully different pcie slots.

  NIC is on, but a stable lights up, does not blink as if communicating on the network.

  install a hard drive in the field that has a windows installation and test network connectivity / worked very well.

  don't know what to do next to get around that.

  suggestions?

  two processors Quad Core Intel Xeon E5520 2.26 Hz processor, 8 MB L3, 5.8GT / s

  Dell / Intel 5520 chipset

  DDR3 1066 MHz memory

  PERC/5i sas controller

  PRO 1000 PT PCI Express Server adapt-interface card NETWORK MFR. Manufacturer: EXPI9400PT

  If this is a new installation, don't bother with the update.

  Download the CD/DVD of U1 and reinstall.

  André

• Installation of ESX NIC support

  install ESX 3.5 u4 VMWorkstation 6.5. Has encountered an error: Setup could not find supported network devices.

  It seems that my NETWORK card is not supported.

  Can anyone recommend inexpensive NIC for a desktop PC that will support the ESX?

  I guess that you configured wrong your ESX - VM.

  Use this ESX - VM as a guide

  http://sanbarrow.com/moa24/files/esxi_35.zip

  He'll find NICs during installation

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Online recovery process is frozen to the installation of the Flash Card Utility

  Following an attack of serious virus a month ago, my computer ended up with at least a corrupted user file. Efforts to correct without great expense may have hurt rather than helped - it is difficult to know what does what.

  Until two days ago, I was faced with three distinct start-up, two partial process and a normal (usually first start in the morning). One of the partial featured no connection. The other managed to connect, but not with the document data.

  After a normal boot, if for some reason, the computer fell asleep or has been disabled, it has not started normally for the rest of the day, except on rare occasions, seemingly random.

  Two days ago Windows began to send messages that Windows 7 has to be reinstalled. Once it does automatically search and correction process. Subsequently, the message became, you may be victim of illegitimate (or Word like this) Windows software.

  On a forum this morning, I came across the steps in a process of recovery Toshiba DIY (no cd or usb) and has begun. Everything went along well for about half an hour, going from one thing to another, sometimes restart. But the process now seems to be frozen. For about 40 minutes, the installation was on Toshiba Flash Card Utility - 10/80.

  I followed the direction does not stop somehow. I really don't think it's still going to complete recovery successfully.

  It is I think that all I could do just end the installation and I'll be back where I was before, but without anything left on my laptop.

  I called Toshiba Support (I'm out of warranty) and the person to whom I spoke and his supervisor, do not seem to have any idea of what could be done, but knew I had to talk to a person "out of warranty". I have to pay their fees, but the only one I think that options are available to me are 1) do nothing and see if the recovery work always or 2 (repeat the recovery.

  Can anyone offer an alternative to $200 at Best Buy?
  .

  There is a mistake in the background which you can cancel and continue the recovery.

  Press ALT + TAB to display the error dialog box, close it.

• HP Pavilion P7-1155: Installation of new graphics cards hp p7-1155

  I have a new EVGA GEFORCE GT730 2 GB GDDR5 graphics card and am ready to install it in the box above.

  Haggiscat suggested this card through a previous post on this site. I printed the directions of installation of help from hp and I so the mechanics of the installation of this thing. These directions say disable the first onboard graphics card, then go into the box and install the new card. My question is: do I need to do something else first as in downloading the driver first / delete the old driver first.etc? Also, I have a disc that came with the new card. Use that to get the drivers or go to the website of invidia? I want this facility to go as gently as possible so expert help would be appreciated.

  I don't know how to direct you to the previous post, but it's in this section. Take a look for general information.

  Thank you

  I did some research after that discover your graphics update did not work.  I found another thread in which the motherboard is the same as the one you have and the video card is in the same family as the one you bought.

  http://h30434.www3.HP.com/T5/desktop-audio-video-monitors/installing-a-GTX-770-graphics-card-in-a-HP-Pavilion-P7-1047C/TD-p/3227997/page/2

  I also see in other forums that the 720 thru 770 cards are not compatible with this motherboard.  I have not found a referenced compatible card.  A resolution has been accomplished by changing the motherboard.

• Network (NIC) card does not work with DHCP or static IP

  Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

  Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver