SA60-672 DVD - RW will not read the CD

Similar Questions

• CD/DVD-Rom will not read the CD

  I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's a CD-DVD-Rom, because before I updated I had no problem reading CDs and DVDs. This is a problem because all my anti-virus and other programs are all on CD. I don't know how to fix this. Any suggestions would be greatly appreciated.

  -Thank you

  Thanks for the post with suggestions. I have tried it all and still had the same problem. I called Dell and got the laptop computer and an hour with a tech restarted my computer and try to fix it, they decided that something in the upgrade process damaged my CDRom and they sent me a new to replace my current one. I'll get it Tuesday and weather post or not, that is the question. Just in case where there are other people out there who might have the same problem.

  -Thank you again for your help

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• DVD rom will not read the original (only) dvd.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  ====================================================
  If it is a recent issue, it may be worth trying to do
  a system restore to an hour before the beginning of the question.

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  More info...

  The free VLC Media Player may be worth a try...
  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Equium A100-027: CD/DVD player will not read the CD data/music

  He'll read/play commercial DVDs, but music no commercial and data CD...

  I tried a new cd of norton, but do not read this and have tried other commercial programs but no luck... just click

  the same thing with music, tried I don't know how many discs, same result... help me please!

  Have you ever tried this method?

  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart your laptop, and after that windows installs it again. Perhaps this may solve your problem.

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• create dvd Windows will not import the mp4, how to get around it, someone knows?

  create dvd Windows will not import the mp4, how to get around it, someone knows?

  It must convert your mp4 to WMV format video, and then add the wmv in Windows DVD Maker.

  There are other formats supported by Windows, but I chose WMV format because it is the most reliable and foolproof format for Windows.

  You can google for a free video converter. No need to buy one, unless you are a 'huge' in the making of films and others.

  I use Prism video converter. It's free.

  I'm not fan of movie maker. Prism is what I need it to do.

  http://Prism-video-converter.en.softonic.com/

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• E T5226 machine will not read the SD,.

  E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.

  Using Microsoft windows 7 Ultimate

  Hi Larry,

  Thanks for posting your query in the Microsoft community!

  I understand that this E T5226 machine won't read SD card. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.

  Downloads & Documents - Support Desk / series T / T5226

  http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626

  Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Installing the driver in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• my dvd burner can not read the cd/DVD, but it can write the DVD. Any help would be appreciated.

  my dvd burner can not read the cd/DVD drive, even when I put the dvd bootable windows it does not read, but it can write DVD. Any help would be appreciated.

  Hi shaikhsabir,

  Fix It at this link should solve the problem of not being able to read CD/DVD.

  Let us know if that helps.

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".