Safari displays "the network connection has been lost" for all files flv on the internet.  Firefox reads all

Similar Questions

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• OfficeJet 6700 Premium: scan of the computer is that is no longer enabled network connection has been lost

  "scan of the computer is no longer active network connection has been lost" appears every 10 minutes or so on my "[redacted] Compaq 8200 Elite Minitour Convertible" is connected to "6700 Premium e-All-in-one Officejet - [redacted] H711n.

  I have already run the 'Locator solutions and update".  He finds nothing.

  I don't know what else to do.

  Please provide the following information if anyone can help including:

  The printer model - done

  Complete and detailed problem description-

  Operating system on the computer (including service pack revision) - done

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

• App Store network connection has been lost because

  MacBook air early 2015 El Capitan 10.11.6

  Regardless of the service providers network, firewall is turned off, I get "we couldn't complete your purchase. Network connection has been lost"message when I try to install any app from App Store.

  Any help appreciated.

  Try resetting the App Store and the deletion of Cookies.

  Reset       Taken from old Toad

• "Network connectivity has been lost.  What the devil?

  I've been themselves disconnected from all Adobe Acrobat Connect Pro meetings that I hosted for the past 10 days.  My clients can't hear me for 30 seconds.  It's never happened before in 5 years, with the help of Adobe Acrobat Connect Pro.  Is there a known problem?  During the last few days my Internet provider has me has given a new modem and introduced new wiring in the building / my office and the same problem still exists.  It makes no difference if I am plugged directly into my i - Mac or Macbook laptop, or if I use wireless.  Any thoughts?

  I don't know how this could be a connection problem, but I'm not saying that it isn't. You can always check the hosted environment login here: http://www.adobe.com/cfusion/adobeconnect/index.cfm?event=serverStatus

  If you connect from another place, you encounter the same problem? If so, it may be a connection problem. If this isn't the case, then it probably has something to do with your Internet provider or IT policies.

• WE'RE NOT ALL OF YOUR UPDATE. THE NETWORK CONNECTION HAS BEEN LOST.

  You have the idea what to do. This happens, when I want to update something iStore and iTunes. THX

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My network firewall has been disabled for some reason.

  Original title: NetworkFireWall

  My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.

  My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.

  (1) you have a third-party security software installed?
  This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall

  (2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...

  If you have an antivirus up to date solution its definitions and do a full scan of the system...

  If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  And/or
  http://www.Malwarebytes.org/products/malwarebytes_pro/
  And/or
  http://www.simplysup.com/tremover/download.html (shareware)
  And/or
  http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
  And/or
  http://www.Kaspersky.com/free-virus-removal-tool

  If this also isn't that the problem may be that your firewall service is damaged...
  
  (3) open a command prompt run as administrator and type sfc/scannow

  (4) try to fix the firewall service
  Run the tool repair services by ESET
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe

  
  And/or
  Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
  (If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)

  And/or
  Open a command prompt using run as administrator
  and copy - paste these
  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  and press enter

  (4)(run as administrator) command prompt, type netsh advfirewall reset , and press "enter."

• After updating Firefox, the font on my screen size has been reduced for all applications. How can I increase the size of the font on my screen?

  After the update, the next screen shows all the letters in smaller characters, with fewer pixels. All screens are like that now, and I found nothing in Firefox Help content. It is a problem because I have vision problems. So, how can I increase the font size that had it before? My screen is approximately 20 inches wide.

     Also, any chance I can change all the font to Arial instead of Times New Roman?
  

  Hi shbuzz2001,

  Have you tried to increase the amount of zoom by pressing on CTRL and + a few times? This article will show you how to use the Zoom.

  You can also check out the Knowledge Base article on the accessibility in Firefox - make Firefox and work of content for all users. It deals with default fonts and other options that may interest you.

  Hope this helps!

• The connection has been lost. Try to reconnect to your session

  

  We have a windows 2003 server. and clients work in windows 7. When the RDP connection is on the server after a while, we continue to receive this type of error messages. Can you please tell us what the problem is?

  Hello

  Your question is addressed in these forums of consumers.

  Here is a link where you can find information and support.

  Windows Server general forum:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Concerning

• Ability of blackBerry Smartphones to synchronize the network time has been lost

  Hello world

  Until very recently, I had the possibility to synchronize the time with the BlackBerry network and the mobile network (3 Australia). Both worked fine as I Express put an incorrect time, and then synced with both of them.

  This now seems to have stopped as his network saying time is not available.

  I tried turn this option off and turned on, tried a battery pull, searched everywhere I see etc.

  Is there anything else that could affect the ability to synchronize the time with the network

  Thank you

  Paul

  Interesting. I went just manually the phone 2 g (because I was doing a long call in a 3G area low and I didn't want to cut out), and when I turned it to 3G and 2G was back at the time of the network.

  Paul

• Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Initially, it was setup for the security but now a few users need to see who's online before.

  Help, please

  Hello

  Thank you for contacting Microsoft Answers.

  You do the following:

  1. click on start.
  2. type: secpol.msc and press ENTER.
  3. go to local security policies / adjustment / security options.
  4. on the right side to find Interactive logon: do not display last user name and change to turn it OFF.

  If the issue is not resolved, answer here.

• my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

  Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

  Hello

  What brand / model of the computer?

  There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
   
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• The connection to the remote host has been lost.

  Seriously, almost every time I save a file and try to download it I get this error:

  The connection to the remote host has been lost. Click Refresh to reconnect.

  So I have to start again to download the file again... but no, I get this error again... until about 7 times then it will finally through. After that happening by once I have on a window of 2 minutes where I can download files without errors... then the cycle continues.

  This is driving me CRAZY! It happened for about 2 weeks. I have not recently changed all the server info. I used to download files on the same server from dreamweaver all the time with ease. My partner with the same configuration works always with ease. So why am I having so much trouble?

  I often have to troubleshoot PHP where I upload to the server to run it to see if it works, and I could have several times to download a file in the few minutes that becomes incredibly tedious task with this ongoing issue.

  Someone please help.

  Thank you!

  P.S. I'm using CS3.

  Ah ha! I finally got to work properly!

  Your site-> Site-> Remote Info Manager, try to check the passive FTP box and see if it works.

• FRM-92100: your connection to the server has been lost

  Dear all,
  
  Please note that I am not able to run at the request of a particular State:
  
  The coming of the error is FRM-92100: your connection to the server has been lost
  
  where as another user is able to take this particular report.
  
  Our DBA had tried to apply the ATG RUP7 patch on a same server different mount point.
  
  Would this had created problems... ?
  
  Please update...
  
  Thanks in advance...

  Hello

  where as another user is able to take this particular report

  Run the report for the connection of users who have problems of client computer users who are not having questions and check.

  Concerning

• Message 'internal network card has been disabled to optimize the battery life' will not go away.

  Whenever I have unplug my laptop, the message "your internal network card has been disabled to optimize battery life.". Lately, the message doesn't go away, even when I plug my laptop back in. When I move my cursor over the message, it is an icon of mouse 'pending' for me and I am unable to click on it. I believe that this is due to a virus or accidentally modify me a file, but I don't know which and I don't know how to get rid of this problem.

  I knew it was a Dell and find out how to disable the message (which is supposed to appear), but do not know why, when you connect what you are disconnect, the message does not go far - she used to go?  It seems to be a useful informational message and not an error message.

  I can't seem to find information on your system on the Dell WEB site to check your network drivers, so I hope someone will have the magic bullet for your situation.  There are the user forums on the Dell WEB site where you could ask your question to be read by all people of Dell.

  If you think that malicious software might be involved, I would start with this:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!