Safari job sharing options are not all my email accounts?

Similar Questions

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753

• Safari and App Store are not open. Recently updated to El Capitan 10.11.4

  Safari and App Store are not open. Safari icon will bounce back and not open. App Store comes up with "App Store close unexpectedly"

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• 'Options' are not listed under 'Tools' in the Manger of the activity to change the font size of the incoming messages. Where is he?

  I'm changing the the font size for incoming messages. Thunderbird "helps," says click on Tools/Options/display/setting in the advanced form. When I click on 'Tools' or use "Alt + T", 'Options' are not listed. Where can I go to get the "options"? I am running Windows 8.1 if it makes a difference.

  ALT + T you should get there. Options is under Tools on the menu bar. Pressing alt makes the menu bar appear if not already displayed.

  If you use the AppMenu (square with 3 lines) button click the AppMenu, hover over the Options, and then select Options.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• the fitting of the image in the field including AutoFit options are not displayed on my options panel of the selections Tools toolbar

  The fitting of the image in the field including AutoFit options are not displayed on my options panel to toolbar for the selection tools. How can I view?

  You're out of space. Some toolbar has been resized/re-spaced in the last update. Click on the menu button (on the far-right in your screenshot) and select Customize... Make sure that the mounting frame (object) is selected. If this is the case, you should disable something else to make room for this group of button.

  Furthermore, I see that your application window is not maximized. What happens if you expand to the maximum it?

• Why not all e-mail accounts that have been accessed for my PC have a record in the registry of unread mail?

  I was check my registry unread mail folder. I discovered that only some but not all e-mail accounts that have been accesed from my PC (all are hotmail accounts) have their own folder. Why is this?

  Hello

  The question you have posted is related to Hotmail and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/forums.aspx?ProductID=1

• Windows Live Mail does not all my emails and does not synchronize with another e-mail account.

  Windows Live Mail does not all my emails and does not synchronize with another e-mail account.

  Hello

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Contact form are not sent to email

  I've done loads of this time contact form and it works very well, but for some reason that this particular form are not sent to email. Php is good, so it must be my form. I'll put the two pieces of code up anyway. Thank you

  PHP:

  <? PHP

  If {($_POST)}

  If (! filter_input (INPUT_POST, 'email', FILTER_VALIDATE_EMAIL)) {}

  $message = 'Please enter a correct e-mail address' ;} else {}

  $name = strip_tags($_POST['name']);

  $company_name = strip_tags($_POST['company_name']);

  $telephone = strip_tags($_POST['telephone']);

  $email = $_POST ['email'];

  $comments = strip_tags($_POST['comments']);

    $to = ' [email protected] ';

  $subject = 'Under contact form.';

  $body = $name. "\n". $company_name. "\n". $telephone. "\n". $email. « \n ». $comments;

  $headers = ' from: '. $email;

  If (mail ($ $subject, $body, $headers)) {}

  echo ' please contact us. We\ will be in contact soon!';

  } else {}

  $message = ' sorry, an error has occurred. Please try again later.';

  }

  }}

  ? >

  <? PHP echo "< style p =" color: red "> $message < /p >"? >

  HTML:

  < form id = "contact form" action = "" method = "post" > "

  < p > name: < br / > < input name = "name" type = 'text' required / > < / p >

  < p > company name: < br / > < input name = "company" type = "text" required / > < / p >

  < p > telephone: < br / > < input name = "phone" type = "such" required / > < / p >

  < p > E-mail: < br / > < input name = "email" type = "email" required / > < / p >

  < p > comments: < br / > < textarea name = required "comments" / > < / textarea > < / p >

  < input type = "submit" name = "submit" value = "Send!" formmethod = 'post' / >

  < / make >

  There is nothing wrong with the PHP script. If the mail service is not available or for some reason any does not run, you get the message "Sorry, an error has occurred." Because you do not get this consignment, the problem lies elsewhere.

  The server administrator is a person. Mean nobody that does not work contact form and ask if mail is configured on the server and if there is a reason email PHP would not work.

• iTunes are not all books

  After the upgrade to El Capitan 10.11.4, iTunes, in the tab books with devices (iOS 9.3), showing only bought books (14). In the iBooks app, I see all the books (421). Restart not helping. I tried to restore the library iTunes versions previous-also not helped.

  This is because you chose the option synchronize your iBook with iCloud. This removes everything, with the exception of iBooks purchased on the apple store. Apparently Apple knows best what should or should not be on your computer and your devices.

  You will also find that your devices all iBooks that are not purchased through the iBook store will have downloaded all over again (click redisplay iCloud books - they have the cloud with the blue arrow down). I had more than 8.5 GB of iBooks, with what has happened. Irritated is hardly the word I would use on this subject.

  You have two options:

  1.) hold your iBook in the cloud, and when you want to read one of your books on your device, download the Cloud everywhere again. If the book was not purchased from the iBooks store, it no longer appears in iTunes on the resynchronization. (At least this is what I found that this is the case on my computer). It is particularly embarrassing because I don't always have access to the internet... and that Apple makes the choice of the command to remove all 8.5 GB of data to my devices really concerns me. They must have provided at least the possibility for ME to choose what to do... or has made it clear that this would happen if I chose to sync to the cloud. They have neither. I am very irritated by this and wonder what their engineers!

  2.) follow these steps on your computer if you have a copy of backup on something like Time Capsule or another drive:

  (1.) to go to the system preferences and open iCloud. Click on 'Options' next to iCloud Drive and deselect iBooks. This will prevent the synchronization of your iBooks to iCloud iBooks.

  2.) go to the users/library/containers and find the com.apple.BKAgentService folder and the com.apple.iBooksX folder. Copy these two files to your desktop for backup in case something goes wrong.

  3.) restoration from your backup files both above ("com.apple.BKAgentService" and the "com.apple.iBooksX" folder).

  Open IBooks) 4. Sign out of your account and reconnect. Your iBook should be back on your computer and resynced via iTunes.

  If you get an error message when you try to open a book that it can not be found, or all your books begin to disappear again when the reopening of iBooks on your computer, wait and allow the app to finish what he does. I found that he got my computer (and my connection internet outside for awhile), but it removed and then restored the iBooks, but they were not in the manual order that I originally had them stored in my collections. To resolve this problem, I closed the program and copied the com.appl.iBooksX file again. When I have opened the app, everything was in place again. The 'com.apple.BKAgentService' folder contains your iBook, while the 'com.apple.iBooksX' file apparently contains the information necessary for iBooks to know what books and in what order in the collections they appear. They reappear in iTunes.

  I had to complete an additional step that I had synced my devices via iTunes which gave rise to all 8.5 GB of my iBook, be deleted, like Apple, thought I should download all individually again since my iCloud. I had to restore my devices from the point a to the top. This could prove difficult if you have iTunes set to sync automatically when your device is connected. If this is the case, you should check the option in the iTunes preferences to stop automatic synchronization when the device is connected. Also from the point a to the top, find your MobileSync folder in your User/Library folder and copy them on his equivalent on your hard drive (making sure to save the original who was there on a case where something goes wrong). Then restore your device to the copied during the backup. The reason for this is because if you updated to OS 9.3, then he would have replaced your original backup of your device with the one where you chose to sync to the cloud. Once you have restored your device, your books should copy all over again and everything back to normal.

  I hope this helps. Sorry it's so long :-)

• Change in 2013 Excel formatting Options are not visible when using high Windows - why contrast themes?

  I am currently using the theme of white high contrast Win 7.  However, in Excel 2013, many formatting options do NOT work, when using this theme:

  1. Fill color
  2. Font color
  3. Conditional formatting
  4. Colors tab

  To reproduce this problem, using Excel 2013 with a Windows high-contrast theme, whatever we have to do is:

  1. Select a cell and try to change the fill color.  It does not work.
  2. Type the text in the cell, and then try to change the color of the font.  It does not work.
  3. To implement conditional formatting for this cell.  It does not work.
  4. Try changing the color of the tab the active tab at the bottom of the worksheet.  It does not work.

  It would seem that, if the high contrast themes have been made to ease of use for those who have poor vision, whereas they should be able to change the options in shape in Excel to make things more visible within their own documents.

  I understand very well that changes in the end formatting options will appear if the user switches to another theme of Windows, but who certainly defeated the purpose of using a theme of contrast in the first place.  Why should they play this user switch to a different theme of Windows just to see the changes he made, using the Windows high contrast theme?  Why the user does NOT agree to see the changes that he or she has filed in formatting options in Excel 2013, when you use a high-contrast theme?

  The user with special vision must assets concerns of colors.  Excel will meet your needs for a higher contrast (black and white pure) at all costs in order to ensure the highest possible contrast.

  Microsoft do not escalate this, it works as expected.

  I don't think you are right to say that this is normal.  When you use OneNote in high contrast black it allows indeed to the colors of different fonts, it is just an oversight or a bug of Microsoft on not supporting the themes of their office software.