Salvation by updating windows 8, I have a problem that says that I made a mistake of 0x8024a000 help
How can I remove err 0x8024a000 on windows 8
Try to run the Windows Update troubleshooting tool from this link. This utility will install, detect and try to solve all the problems it finds with your configuration.
Let us know what happens
Tags: Windows
Similar Questions
-
Hi, I tried again and again to this backup that I have to do, its only accepts no not my USB key, but demand for the discs. I know that I can use the flash player, how, please?
Hello
-What do you mean by "backup on my windows 9?-Are you referring to "Windows Internet Explorer 9?-What are you trying to backup?-You are aware of any changes made on the computer before this problem?If you try to run the backup in Windows 7, please visit the links below to learn more about the backup in windows 7.Backup and restoreWhat is a system image?Back up your files
Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
http://support.Microsoft.com/kb/555375Hope this information helps. -
Your message is cut and the clip does not help, but I guess that your DVD drive does not work. Just go to the section Lightroom on the following page and download the 5.6 version for Mac or Windows and run the installation from there. This is installs them COMPLETE. You would have had updated to the latest version in any case, as the program on the DVD isn't 5.6.
-
Hard drive crash as possible; If I buy Windows 7, I have a problem installing it?
Startup problem
I can't start with Vista. Download the screen saying enter ctrl-alt-delete. Unable to restore the system, use backup factory or reinstall the OS from the system CD. But when I checked before the accident, the hard drive worked OK. Obviously, corrupted. My question: if I buy Windows 7, I have a problem installing it?
It's your BIOS configured to boot from the recovery disc?
How load BIOS and change Boot ... - Notebooks.com
If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.How to do a clean install with upgrade disc:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installationSkip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
Original title: scams?
I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?
Continue to put the phone down. They are all crooks.
They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.
-
I use Outlook and have the problem that when I send an email that has an image of my PC to a friend risk a Mac, they don't get the image; just text! Is - this way I send or is the problem with the Mac user?
original title: sending email JPGs from PC to MacTry attaching one instead and see if they get the picture. It is possible that their e-mail program cannot correctly interpret the HTML message format.
Steve
-
I just uploaded a new site to an existing via filezilla domain. It worked great and my site is up, but I have a problem that does not show when he would be seen in the fake browser Adobe Catalyst. I have a logo in the left corner of the page master. In Muse, he shows that he is in the right place, and when I go to preview, is also in the right place. When I went to live with my Web site, it shows that the logo is off, to the left and not at all in the right place. Any ideas on what I can do to move this and stay in the right place. Everything I have on the master page is prominently in the live version.
Probably, you have a box or empty text box somewhere see this thread for the fix: Bug Muse | Graphics shift randomly, why?
-
I have a problem to publish my site, made with Muse cc my host Aruba. my error is [FTP Upload failed: 550]
Hi Antonio,.
The 550 error is a message from the server indicating that the account that you are currently logged no has not the required permissions to perform the action you are trying. You can try to download on the wrong directory.
This is not a specific problem of the muse, I would suggest that you talk to the administrator of the server.
Kind regards
Rohit Nair
-
After the last update Windows 10 - Z30 Satellite screen problem - has
Hello
After updating Windows 10 (threshold/1115) one of our Z30 - A sometimes wakes up after hibernation with the screen off. The only solution is to turn it off by holding the power and then turning it back on, button which is obviously annoying because open files may be lost or corrupted. The other Z30 - A that you don't show the behavior of sound.
Someone at - it ideas? I would really appreciate the pointers.
Thank you very much!
Kind regards!
Sounds like a driver problem.
go to control panel and uninstall different drivers (sound, display, wireless, etc.), then let Windows update install the latest versions.
-
It is a known issue that slipped with our patches for the update. Already, we have a fix in hand and it comes out in our next update to users.
Thank you
Adam
-
I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version
All view of what can be done
If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?
Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..
-
Oops! I have a problem looking at a set of Yahoo products online! Help?
I'd always get pages of Yahoo displays normally before that, but during this period, the pages, like Yahoo Answers, Yahoo Notepad, even Yahoo.com, not may display correctly. No image, no frame full and a handful of plain text there... I suspect that his server got a lot of things went down. But this could be due to my laptop. If so, how to solve this problem, until it works? Indeed, I have tried different browsers, clear cookies, history, temporary files... but it still do not work. Thanks in advance!
Hi Randy liu.
I see that you have some problems accessing the yahoo Web site. I'll help you with this problem.
1. what security software is installed on the computer?
2. have you made changes on the computer recently?
If you use Internet Explorer, then I suggest you to refer to this article and check if that helps.
Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
I hope this helps.
-
4 days ago, I thought I was getting an update as I would like, get the update of WINDOWS 8 - BAD? 1: I know that I have installed DVD and I need the procedure to use to eject. AND 2nd, how to get back my WINDOWS 7? Just get original CD input and follow directions? Of course, this brings back us to question 1.
Thanks Ya'll,
Garry
Hello
1. What is the problem you're having with Windows 8?
2. which type of installation you did (upgrade or clean installation)?
3. What is the number of brand and model of the computer?Follow him below Microsoft article and check if it helps.
Start the computer from a disk to install Windows 7 or USB flash drive: http://windows.microsoft.com/en-US/windows7/Start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive
Installation and reinstallation of Windows 7: http://windows.microsoft.com/en-US/windows7/Installing-and-reinstalling-Windows-7
Note: you will lose data and applications and you may need to reinstall the applications. Be sure to back up data that you want to keep before you begin.
Note: there are two options to choose during the installation process of Windows 7:
Upgrade. This option replaces your current version of Windows with Windows 7 and keep your files, settings and programs on your computer.
Custom. This option replaces your current version of Windows with Windows 7, but does not keep your files, settings and programs. It is sometimes referred to as a new installation for this reason.
Note: to eject the DVD
You may need to press button on the front of the disk to eject -
Updated Windows and now have lost all access to Outlook.
My friend was working on his computer when his computer has been automatically stopped to install an update from Windows. When his computer returned to the top, he was not able to implement his program of Microsoft Outlook. Its icon went, he said. He did a backup of restoration of 24 hours, and it did not fix the problem. Can you help me? It has windows 7.
Hi Blumoods,
I can't explain why it happened, but it should be easy to retrieve her icons. Pass him c:\programfiles\microsoft office\and click on OfficeNN file (should be office11 or office12). If you organize type as is, you should see icons for Outlook, Excel, Word, etc. Just copy them to the office.
Hope this helps,
Barbara
-
I have dealt with this for three days.
I do not have a restore point.
I have no Image Recovery
I can't print the instructions.
I can't save anything.
I press the Start button and it takes 5 minutes to respond.
I borrowed this computer from my college so I know...WHAT CAN I DO?
Please help me
Any update has nothing to do with a failure of the drive.
If you are able to copy all the data to the external (a single copy will do) do so NOW! Also key for the software you have purchased.
Your dell should have a diagnostic utility that you access by pressing a specific key as soon as you turn on.
I hope that you have created the system recovery disks when you got your system, otherwise you will need to contact Dell for their.
You need to replace your hard drive, no doubt there will be a person knowledgible at your college to help if you do not know how you
Maybe you are looking for
-
Projector shows the progress bar is empty after indexing...
After I realized, that the msd progress was constantly running with 50 to 80% I have rebuilt the index of Spthlight and the CPU usage is now missing. What is left and who irritates me, now, are just the "indexing...". ' appears on the search, but the
-
HARD drive shows less space than it actually is.
So, we have an iMac 2010 and it's on Yosemite. We installed Windows 7 earlier on a bootcamp partition and it worked fine. Well, go ahead some time and I try to delete the BootCamp partition to save space as we never use it. Utility disk I would remov
-
Game performance fluctuates on my y460.
I have a y460 I've had a few years ago. Sometimes, when you play I get a large (60-120 FPS) framerate and sometimes I get a terrible situation in the same scene, same and same level of action and the same parameters, so it is not quite normal fluctua
-
Error codes: 643 & dt000
My computer gives me this mssg, and I can't fot the life of me understand advice on Microsoft.com (or any other site besides) Why Windows does not do something about it. I'm NOT a computer Expert, I just use my computer and do with it. Now, I have to
-
Why it's start to appear when I get new updates. ?
I click on the button set to day and when I restart message is beginning to apear:"There is an IP address conflict with another system on the network"Help, please! What should do?