Sam 1710: its device problem

Similar Questions

• 2 phidgets at the same time, the event problem

  Hello

  Currently I do a Vibration Analyzer to measure the communicability between 2 masses, so I need to measure the two masses at the same time with 2 phidgets at the same time. My problem is, when I use only phidget both the program identifies correctly and it measures very well, I use 2 different phidgets, the 1056 and the 1049. But when I plug them both at the same time only an event is on, he identifies the two but the graphs do not work properly for some reason, and I think that its because of the event. I'm not very good at Labview, I only did a simple program before, so my experience is not very large. I hope that he didn't need a Subvi.

  Would be grateful for the help from you guys.

  Best regards.

  João Pereira

  
  

• Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78. How can I fix it? TWC tells me its a problem with Outlook.

  I receive the following message if poster when you send an email from Outlook Express 6 'the message couldn't. not sent because the server rejected the sender's e-mail address ' Server: ' smtp - server.twcny.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78.  How can I fix it? TWC tells me its a problem with Outlook.

  Technical issues do not belong in the forum Feedback response so I moved your post to the WIndows XP "Netwoking and online" Outlook Express forum where questions are handled.

  Outlook and Outlook Express are completely different products and are not related except for the names.

  The problem you describe product generally when you have not defined thte option to authenticate your outgoing SMTP server.  If you click on tools > accounts, select your account, then click Properties, you should see a Servers tab.  This tab is a check box labeled "my server requires authentication".  Check it out.  Then check the settings button to the right.  You'll see two radio buttons.  From the top, labeled 'Use same settings as my mail server outgoing' is generally the right to choose.

• How to export images and they look the same on all devices (iPhone, mac, desktop computer book)

  Hello

  I have adobe lightroom cc 2016 and I'm having the hardest time export photos, especially those where I use adjustment brushes and have look the same on all devices, my man book retna I will edit to look how I want, but for example when I look at the same image on the desktop mac dessu I can see all the adjustment brushes I used to darken

  on the 2 pictures below

  the first is what I see, its all uniformly dark and when I look on another device, according to me, which is depicted in the second photo

  (I have more exposed the second to show what I mean)

  I do not know what device who's going to be watching this post, but I hope you can help!

  Thank you! don't know what to do

  

  To ensure maximum viewing compatibility make sure you set the colorspace of the export in sRGB as below:

  

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  From the link 'related items' below, see:

  Give your book a new internal ID.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark.

  Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark. Tried to remove drivers and rebooted in safe mode, the same still seems a conflict somewhere, but how do I find and fix it please.

  Try to remove the UpperFilters value. by following these steps:

  Copy and paste the following text in Notepad and save to a .reg file (save with the .reg extension and give a name like fixcd.reg):

  First create a system restore point, and then double-click the saved .reg file, add to the registry and restart the computer.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}]
  "UpperFilters" = -.
  'LowerFilters ' = -.
  

• External device problem - "YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK" & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED."

  Original title: external device problem

  Whenever I connect any external devices like pen drive & sdcard, I can't write anything in them, that they are not protected in writing! But I can copy things from them, but I can not cut & paste anything on their part in my system. I can only copy & paste. Whenever I try to write anything he says 'YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK' & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED." When I tried to format these devices, he says "YOU do not HAVE ENOUGH PERMISSION to PERFORM THIS OPERATION".

  Please help me!

  Sriram salvation,

  Have you tried the suggestions in the previous answer?

  I suggest you to disable the antivirus application and check the status of the issue. Refer to the following steps:

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if you need assistance.

• Made for CS6 and creative cloud installed in the same machine cause registry problems.

  Made for CS6 and creative cloud installed in the same machine cause registry problems.

  Have installed both on a system must not cause registry issues.  There may be problems where CC resumes a CS6 facility as part of a subscription right.

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

  A copy of my post TomsHardware, where no one was trying to help:

  "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

  -J' bought a Razer right headphone, it does not work when it is connected.

  -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

  - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

  -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

  -My headset works fine, but the microphone is not yet detected.

  What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

  What I don't have: the Realtek audio Manager.

  What I wish I had not: Audio from Dell.

  Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

  Sorry if I look really angry at the moment, but I think we've all been there...

  Thank you. »

  The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

  EveryNameWasTaken

  Every post that I found online said that the Realtek HD GUI is the way to go

  Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

  EveryNameWasTaken

  I just need a way to access

  My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

  EveryNameWasTaken

  Please provide another way to separate input devices that are entered into the same outlet

  A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

  EveryNameWasTaken

  Inspiron 15 3542

  Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

  EveryNameWasTaken

  It befuddles me that Dell would give us a different GUI that has so few options

  I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

  EveryNameWasTaken

  I did not buy a $100 laptop, I bought the headphones for $100

  I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

  EveryNameWasTaken

  -A system restore will not change anything

  I run a retrieval system to remove windows or configuration problems, but that's just me.

  EveryNameWasTaken

  decision does not have a headphone and microphone with any device I checked

  If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

  EveryNameWasTaken

  "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

  Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

  EveryNameWasTaken

  Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

  You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

  

  and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

  EveryNameWasTaken

  each response that I get from either Razer themselves or now these forums was condescending.

  Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

  When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

• Problem HP DV4 - 2100 Webcam, missing same picture of Device Manager device

  Hello

  I have HPdv4 - 2100. The laptop is a year (bought in April 2010) and now out of warranty. The OS is Win Home Premium 7.0

  I had the problem with the webcam. All of a sudden it has stopped working. Also, I don't see imaging device in Device Manager. I tried all the updates, contact the HP support by phone, lost a lot of time without result.

  Recently I started to use an external monitor, screen and keyboard. I noticed when I tilt the screen at angle of 45 degrees or less the webcam has started working. I can even see the imaging device listed in Device Manager. If I am inclined then 45 degrees of the webcam no longer works, even imaging device get disappear from Device Manager.

  The problem is when I need to use the machine with the webcam, I can't use, because you can't work with the screen tilted at 45 degrees. It must be set by HP engineer.

  So the conclusion is there may be a fault of (acrack or bad connection) cable that connects to the webcam to the computer of PCB.

  I wonder the poor quality of the cable or the connection used in this machine, which is a year old and not used much.

  I write this so that people facing simillar problem, try.

  It was a problem with the webcam and view the cable. Both had to be change.

• HP dv6810us 'Base system device' problems AND MORE!

  Hello!

  I have a problem I have been struggling with for several months now. I do not know what is happening and am puzzled because. I will describe what is happening as well as I can and expect an answer.

  My laptop is a:

  Laptop HP Pavilion Entertainment PC model DV6810us. I run Vista, of course.

  I had this laptop for my 16th birthday a year and half ago. As expected, it worked like a power all the time. Around my 17th birthday, he began to have some overheating problems. Attaches easily with some canned air.

  However, soon after, I started to have some other, more distinct problems. The first was, on start-up, I've received an error message indicating that the module of HPwinmx (sp?) had stopped working. A few weeks later, I started to receive alerts from Windows with "new hardware found". Specifically, three system of Base and an IEEE 1394 controller devices. At the same time as these physical alerts, my ports series and s-video stopped working, my cd player, as well as my multicard reader.

  At this point, all attempts to reinstall the drivers for those devices were unsuccessful.

  Needless to say I was due for a while on what was still working. There is not enough money to get the extract. Sometimes, at the start, all these devices would be online for no apparent reason. I reasoned that the material must be end - no melted connections or shorted wires. It must be in the drivers.

  Last Thursday, my laptop has informed me that I had no speakers, microphone or headphone jack. Being a music and a drug of Hulu, which could not support. I decided the best way to solve this problem would be to back up my files to an external drive and wipe my laptop to a factory state using System Restore HP. Well, I just finished that about 01:30. And now, nothing, and I mean absolutely nothing changed. Same features, same problems, etc, etc.

  I cracked her open to find internal damage. I don't see nothing, for what it's worth. =/. A crossed the CMOS and BIOS for info. No change. However, when I look at my startup journal, he told me what PCI bus are turning back errors. I have been unable to pause and see what he said, and the information was retracted before I could read.

  I couldn't be more confused about what is happening here.

  For the love of God and all that is holy, just WHAT is going on here?

  ---------

  For reference, here are the details on errors for three basic system devices:

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Most certainly. The cost of a new motherboard is going to be at least $ 250 for you and this is simply too much to spend for a repair. Your parents may think differently. A new motherboard is about $150 online (not of HP they charge more than double that) and labor is about $ 100 to $ 150. You would need to find a reliable repairperson or there are several good online, too.

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• Satellite A200 - 1 H 2 - Virus and its driver problem

  Three weeks I bought new laptop Satellite A200 - 1 H 2.

  I have Windows vista with my new laptop computer.

  1. When do voice chat online (yahoo chat or just VOIP), receiver is not able to hear my voice but can't seem to listen to his voice clearly.
  My versions of sound cards are:
  Audio version of Realtek High definition: 6.0.1.5433
  High definition Audio Device, version: 6.0.6000.16386

  I checked the audio drivers, my speakers and the sound settings. everything is fine. Even if the problem still exist.

  2. I installed Norton Anti virus on my machine that came with the new laptop, even if a virus settles in my machine, his hitting messge automatically between my messages.
  But every time I run anti virus, get a message like a cookie should be resolved, even after setting this cookie also in the next virus scan am same cookie again.

  I deleted the cookie of IE-> tools-> options. But it has not solved the problem.

  You could any body help me on these problems?

  Hello

  Autour Googling, I found many comments on the problems of sound using Yahoo Vista. Have you checked what others write about it? Yahoo is not my favorite Messenger but I would like to know if you are using the version for Vista?

  Unfortunately, I can't say anything about Norton. I tested this version of 90 days on my P200, but after a few days I have removed from the system. It is not my favorite for the protection of the system program.