Same bugs occurring after every reboot.

Similar Questions

• Print spooler is corrupted after every reboot.

  original title: corrupt Printer Spooler

  I have huge problems with my spooler.  I tried every fix I found on this site, and they work.  Until my laptop is restarted, then Windows 7 seems to be obsessed with restore corrupted files.  It seems he has programmed it to file backup that runs the joint.  We have renamed the files, we ran all the scans here, we did things together of dependencies (which has never worked in a first time.)  When I do the scans, it is said he found and repair corrupt files.  Then I turn off my laptop.  Turn it on, VOILA!  Corrupted once more.  I really don't want to, or don't I think I should have to, go through the trash whenever I want to print.  I want a permanent solution, please.

  Hello VxShady,

  I lived the same problem and your last message gave me a few ideas, leading to the following solution worked for me.

  1. Open a with right click command prompt and use the option "run as Administrator".
  2. SFC can restore the version appropriate for spoolsv.exe, "sfc/scannow".
  3. Start the spooler service to confirm it works and set to start automatically.
  4. Open a Windows Explorer with the right-click and use the "Run as Administrator" option.
  5. Navigate to the Windows\System32 folder, right click on spoolsv.exe and choose the properties option.
  6. Check the read-only check box, and then click OK.
  7. Copy the file spoolsv.exe on the desktop for good measure.
  8. Reset.

  The program or service that replace your file with a corrupted version spoolsv.exe should now be unable to crush them. For me, this solves the problem, and the spooler service starts automatically after reboot.

  I hope it helps you too!

  Best regards, Dave

• Satellite A350 - 110 PSAL6E disappearing after every reboot Win7 card reader

  Well, the title says it all.

  As far as I know, that this model has a JMicron card reader - Windows Update installs its own drivers for it.
  I tried the drivers of * [HERE | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 819 selSho 789 = rtMod & language = 13 & selOS = 29 & selType = 316 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 316 & page = 1 & ID = 69749 & DISO = 29 & driverLanguage = 42] *.

  The thing is: I install the drivers and perform a restart. After that, the card reader works perfectly. However, if I do another reboot it disappears and I have to install and reboot again.

  Am I missing some other bits of software reviews? For anything else, I used the Toshiba Software Installer.

  Hello

  You have not missed anything guy card reader controller driver is the only driver that controls the card reader.

  I think that it of not a problem with the driver, but with the Windows operating system. I don't know if the update of Windows messed with something, but usually the update from Microsoft should not affect functionality of Mr. card reader that's why its odd to me that the driver does not work after restarting.

  However, maybe you must first uninstall the card reader driver. This in Device Manager.
  Mark the card reader and uninstall the driver. Reboot the laptop.
  Then clean the operating system using CCleaner (freeware tool can be downloaded from different pages).

  After the cleaning, restart the device and install the driver through the Device Manager. Reboot and test functionality.

  Good luck

• 'Unidentified network' after every reboot with Windows 7

  Hi guys,.

  It seems to be a large number of people with this problem and a multitude of suggestions on how to fix it. I had no chance.
  So far, I've tried everything, including the quite this long list here (excluding those of the 'method III' that I'm working through): http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-loses-my-network-and-becomes-an/7b305de9-3793-4c32-b9da-a1f83d6a57b2

  I am running Windows 7 Ultimate and my network card is an Asus USB - N13 which has drivers updated.
  As the title says the issue of the "unidentified network" occurs whenever I restart the computer. It's interesting when when the computer "connects" to my wireless network but is on an 'unidentified network' of my router do not see. Not totally sure what to do this.

  If it helps two temporary fixes, I found iinclude:

  Reset stack TCP/IP as follows (taken from http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/homegroup-network-disappeared-on-desktop-replaced/258ca60f-d2bf-41f5-a37a-ff391d64e0d2)
  
  a. click the Start button, type cmd.
  b. now in the result of research with right-click on cmd.exe and selectrun as administrator.
  c. Enter the following commands, one at a time, and press ENTER:
   
  ipconfig/flushdns
  nbtstat-r
  nbtstat - RR
  netsh int Reinitialis
  netsh int ip reset
  netsh winsock reset
  
  d. restart the computer.

  As well as the removal of the network, uninstall the network driver and restart the computer.

  Patches above must be reapplied the next time I turn on the computer much.

  This question is particularly annoying for me because I plan to use the computer as a server without a head but I can't connect to it remotely because of this problem.
  Any help would be appreciated. See you soon.

  Try to disable IPv6 on this card and see if that helps.

• Creative cloud update installation crashes at 5%, then displays error code 1001. Running Mac OS x 10.10. Occurs after several reboots.

  Someone at - it a fix for this problem?

  Hi Jay,.

  If you have deleted and renamed all the files mentioned above must install, if there are any file will not run the full installer and the installation program will give up to halfway.

  However if is not install I would suggest that you contact our support teams CHAT/PHONE as they can remotely in you machine and check the root cause of the problem.

  Contact the customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options listed below for support options:

  

  Let us know if that helps.

  Kind regards

  BANI

• I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  original title: tired of it

  You have posted in a forum for MSE, antivirus, antimalware application.  You must investigate e-mail options... providers (hotmail, gmail, yahoo, etc) screen several e-mail for spam.  You don't have not yet described here your email client... so there is little that anyone can tell you that generic advice.

• deleted photo albums are reproduced after every ios update

  After every ios update and a reboot there is old on my iphone and ipad photo albums that I deleted a long time ago (I created these albums if you use iphoto, but I deleted them on my mac after I went to photos). To my knowledge, there is therefore no these albums on my mac more. The app iphoto and iphoto library have been entirely removed from my Mac. So, where did they come from? I do not use icloud photo sync or something. Just sync albums selected with my devices via itunes.

  I found a method to remove unwanted albums of my devices first unchecking an album in itunes and then sync again. But on the next update, as if by magic they reappear. Anyone an idea what to do, then these ghost albums don't happen again after my next update?

  Hello there, hkr1234.

  It seems you see sync photo albums on your iOS device that you removed from your iPhoto and Photos for the libraries of Mac. One of the possible reasons for the behavior you see, it's the folder iPod Photo Cache is created when you synchronize your phone always contains the information for these photos. The following Knowledge Base article proposes in-depth measures to remove this folder, in effect, resetting so that it is created again the next time that you sync photos to your device.

  On the folder for Cache Photo iPod

  Delete this folder does not remove the original images in your library, and the file will be recreated the next time you sync photos with your iPhone, iPad or iPod.

  The location of this folder depends on the synchronization options you select in iTunes. In iTunes, if you change the selection in the menu synchronize Photos, it will create a folder iPod Photo Cache (and the previous record will remain).

  Photos, iPhoto or Aperture

  If you're syncing from a photo, iPhoto or Aperture library, follow the steps below to find the folder iPod Photo Cache in its default location:

  1. From the Finder, choose go > home of the bar menu at the top of your computer screen. If you have moved your library of Photos, iPhoto library or Aperture library to a different location, go to this location.
  2. Open the pictures folder and locate the library of Photos, iPhoto or Aperture Library library file.
  3. Control - or right click the file, and then choose view the contents of the Package on the shortcut menu.
  4. In the window that opens, click on and drag the cover Photo iPod folder to the trash.
     Don't delete or change any other file in the library package. Remove or modify other files can result in loss of data.
  5. Close the window.

  {...}

  A folder on Mac OS X, Windows XP, Windows Vista, Windows 7, Windows 8, or 10

  The iPod Photo Cache will be in the folder you selected to synchronize with.

  To learn more

  • The Cache Photo iPod folder may be larger than the size of the photos being synchronized.
  • The iPod Photo Cache size can vary depending on the device is synchronized. A device of the higher resolution, more iPod Photo Cache will be.
  • If you are synchronizing with multiple devices, your iPod Cache can contain several optimizations of the same images.
  • Learn more about how synchronize photos in iTunes.

  Thank you for reaching out to the communities of Apple Support.

  See you soon.

• Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot.

  Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot. I tried the new own profile - everything works fine. I don't want to installation and implementing all addons after reset of profile, so try to understand the problem.

  Compensation for the "Site Preferences" (in the "Clear recent history" or Ctrl + Shift + Delete) same for the "last time" helped.

  (permissions.sqlite contained an empty table instead of default lines)

• HP Pavilion M7 - WiFi lights not after a reboot. -Windows 8

  Hi everyone, I just reinstalled Windows 8 and I am very frustrated with this little problem.

  I downloaded the Realtek Wireless LAN driver from the HP website. I installed it. After installation, the WiFi works automatically. Now, after a reboot, the WiFi does not start upward. Everything is up-to-date, I checked in the Device Manager, and I even reinstalled the drivers. It does not just straight up. Everything on Windows said I need to physically turn it on.

  Any help? I can't believe that I can't use the built-in WiFi. I currently use a LBS-Link USB WiFi adapter which worked well in all of his application since he came home.

  Squerl,

  Welcome to the forum.

  First of all, you can try a Power Reset, which does NOT affect data on the disk.  The power / Hard Reset can help if the problem is in the pilot instructions that are stored in the computer's memory and persist to boot at startup.

  Resetting the forced feeding

  Performing a Hard Reset or forced Reset

  Power reset cannot tell the difference between drivers - it does not analyze a driver before applying.  It assumes that all the drivers on your computer belong there.

  EXAMPLE:

  • If the driver on the disk is the wrong driver before rebooting, it's always the wrong driver after the reset.
  • If the INSTRUCTIONS of the driver are tangled, messed up, or there are missing pieces of these instructions, the reset can solve the problem.

  Why a power reset works to solve some problems:

  The power reset does not install anything on your computer, it does not remove the programs on your computer and Reset does not change the settings on your computer.  Your data and programs remain as they were before the reset has been applied.  Reset runs old program of the memory instructions and forces the computer go to disk operating system for new instructions.

  Why a power reset does not work:

  If the problem is more than a simple tangle, if 'good job' on the computer is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset won't work.

  If there is a hardware problem power reset will not work.

  ==============================================================================

  Then, you can set the properties of the LAN driver to allow the driver to "wake up" the computer.   At the same time, you set the driver to NOT allow the computer to stop the driver.

  Windows key + X > M (opens Device Manager) > network adapters >

  Right click of your wireless adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  CHECK 'Allow this device out computer' > *

  Ok

  * NOTE
  

  Read the warning on the wireless driver performance while the notebook is on battery.

  Remember that this setting CAN have side effects.
  

  =====================================================================================

• 4 updates keep the facility several times, but do not appear in Add/Remove programs after a reboot

  Original title: 28/03/14 Windows XP updates wants to keep same installation 4 updated updated on logoff. BUT do not show in Add/Remove programs after a reboot? Thanks.Help please.

  Hi, I know this question is a chopped dead horse more again and again. And thank you for your help. Preparation for April 8, the best I can. You want to change this mess first. Very tight schedule. Don't know if these updates are important. Has been published about 5-7 days ago.

  There are 4 Windows XP updates on my 2004 Sony Vaio wish to logoff (on the stop icon) install. And say sucessfully installed it when I do this on the Windows Update page. But after the restart, the updates below do not appear in the Add/Remove Programs folder. That's why when I logoff, he wants to install on the stop icon again, eating my C drive that has now fallen to 15%... Just enough to defragment. I don't know where to install these files. Need to trash and cleaning of the space. Your help is more appeiciated. Thank you very much.

  

  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2832411)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified in a Microsoft software product that could affect your system. You can protect your system by installing this update from Microsoft. For a complete list of issues included in this update, see Microsoft Knowledge Base article associated. After you install this update, you may have to restart your system.  Details...

  

  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...

  

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  This update solves a set of known issues in Microsoft .NET Framework 3.5 Service Pack 1. After you install this item, you may have to restart your computer.  Details...

  

  Microsoft .NET Framework 3.5 Family Update (KB959209) x 86

  Use them as a guide to repair the problems of .net framework:

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  More information

  http://taurarian.MVPs.org/framework/Net_Framework.htm

• After a reboot, none of the usb ports work and USB problems-uninstalled USB Ports

  I just bought a Seagate external drive, but none of my usb ports work. I looked into it and followed what it says on the uninstall of my USB ports, bad move on my part. Now, after a reboot, no usb port works, I've tried all microsoft support said to do and nothing seems to work. I think I need to reinstall my usb root hub? Perhaps, but I can't seem to find anyway to do. Help, please!

  Hello

  Check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the USB key and expand the drive, double-click the sub element to check if an error message or error code is listed.

  If there is no error message highlight Bus USB controllers and then click Action select check for material changes.

  You can check the link below: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

• Intermittently after the reboot, the option "Hide when minimized" in the Task Manager Win XP is too effective; the CPU usage icon does not appear in the notification area. Sometimes restart heals, sometimes not.

  The Options menu of the Windows Task Manager includes "hide when minimzed ', to display an icon in the area of notification, but not on the traskbar. I leave that option checked all the time to control the percentage of processor; but sometimes without apparent cause, after I reboot there is no icon in the area. Is there a way to fix this?

  Hello ronks,

  Thank you for visiting the Microsoft answers community.

  The reason for which the icon is not in the system tray is because the Task Manager is closed not minimized when you start your computer. To do this, you could do the following:

  -Go to my computer > C: > Windows > System32
  -Locate in Taskmgr
  -Create a shortcut > right click on the shortcut > click on cut
  -Navigate to my computer > C: > Documents and Settings > username (your username) > Start Menu > programs > startup
  -Paste in the startup folder

  -Right click on the shortcut > click Properties
  -Less run > pull down the menu and select Minimized > click OK > close window

  Now every time that you restart the Task Manager will be launched in a minimized state.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My monitor has shadows after every letter I type and my icons of the screen.

  My monitor has shadows after every letter I type and my icons of the screen - how can I make them disappear?

  Hello

  1. All changes made to the computer before the show?
  2. What brand / model of the computer?
  Method 1:
  This problem may occur the display drivers have not been updated. Check out the link and follow the steps to update the drivers.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can also visit the link and follow the steps.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Method 2:
  Check out the link and follow the steps to check if a non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

• Notification of App calendar activated after each reboot

  Hello

  I use the calendar app Google Calendar of Playstore. Then I turned off the notifications the calender app preinstalles form.

  After each reboot notification by default calendar app settings are enabled if I get all notifications of calendar twice. Google Calendar and the calendar preinstalles application.

  There seems to be a bug, because a repair with the android firmware installation actually lollipop has no effect.

  Can you reproduce this bug?

  Thank you!

  @ThundiX

  If you disable an app, that it will not turn on unless you go to

  Settings > applications > select the application > activate.

• Image icon Vista black Vista after a reboot.

  I have the same problem with all my icon graffics turning black Vista after a reboot. If I boot in safe mode, they all appear and then let it restart normally they all come back. Until I have to restart again as when the power turn off. Power mode setting did not help. Thank you

  I have the same problem with all my icon graffics turning black Vista after a reboot. If I boot in safe mode, they all appear and then let it restart normally they all come back. Until I have to restart again as when the power turn off. Power mode setting did not help. Thank you

  1. run a full scan to ensure that your computer is clean.

  2 How long ago since this problem happened?
  If it's not too long, and if you remember a time when you didn't have this problem, so do a restore of the system in safe MODE.
  Pick a date when there is no problem as long as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  3. go to safe mode and run a file system check. This is for finding corrupted files and it will try to repair if it is found.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  4. go to your computer manufacturer and check to see if your card grapgic driver needs to be updated.