Sample of data written in a txt file

Similar Questions

• multiple columns when the data connection to a txt file

  I am eager to write for different columns third example of a single txt file when recording data. Can someone show me examples of code how get 3 groups of data with several points, write them in their own columns and then go back and write more data points to the columns by adding the data... Please and thank you.

  Hi Tony,.

  Here's a basic example to do so.

  In newer versions of LV, you will find a 'write in the spreadsheet file' function which performs the task of the two functions to the right of the block diagram, but the version reported is more flexible IMHO because it allows to add easily the headers and footers...

• Save xy (cluster of 2 double 1array) data in a spreadsheet TXT file

  Hi, I had this program simplified to save the data, that I am able to draw in a TXT spreadsheet file. In the original program, I receive data from an instrument, which gives me 6 data per hour. How can I get data, as shown in the chart?

  Thank you

  Antonio

  Try this:

  

• 1059 Error - cannot get 11 channels of data written in the spreadsheet file

  Hello everyone

  Again, it's Luke. I got the 7 fixed error, missing just a specific filepath to save data too.

  I now hit another snag along the way. When I enter data into a spreadsheet box writing, an error comes up saying "error 1059: unexpected file type".

  Anyone have any idea why its doing this?

  The only things that I put in the function box is some specific data on 2 GPS units I use, with a tension from my DAQ and the installation of strain gauges. Information works on my front and information is coming through, but will not save the data in a spreadsheet file, and writes a .lvm file will not work either.

  I will surround a printscreen of the configuration for the block diagram:

  

  Ohm Man wrote:

  I'm not sure of the exact file extension

  How do you define it?

  You set under whatever file name you put in your control filepath.

  I don't think it makes sense to get an error that says for attempting to write to a text file.

  Any chance you try to write the file to a path that you have not the full access rights to?  I think the error may be 1059, but it's actually be caused by a file windows error.  How about some strange characters in the name of the control that are not valid in Windows file?

• How constantly write data in a txt file

  Hello
  first of all, sorry for the bad English, but I have a problem to write data continuously to the txt file... I have a chart 2D with values based 2 sliders (sliders values) and some functions I want to interpolate the value by using the bilinear method... and after that the value of the sliders, interpolated value and the value of the closest points, I want to write to a file txt... for every 2-3 seconds perhaps, it would be ideal to be formatted as ::
  x y f f1 f2 f3 f4
  ..   ..  .. . .. .   ..   ...  . ..
  ... ...  ..    ...   ...   ...   ...

  but... first of all I have a problem with writing data, because every time he deletes old data and simply write a new and it is not horizontal... I am very very new to this (it's obvious) and any help will be very grateful 
  Thank you

  

  Diane beat me to it, I made a few changes to your code, so I'll post it anyway.

  

  As proposed, please go through the tutorials.

  I added an entry to the worksheet at the end node just to show it can be done at the end so. Table of building on a while loop is not very efficient memory, but it's just to show you what can be done. If you plan to go this route, initialize an array and use the subset to the table replace.

  All the best.

• Export form data to txt file

  I have created a form in LiveCycle. I need to have the data exported to a txt file. Previously, I've created a form in Word and it imported in LC. If this form has been filled out in Adobe and saved, I was able to export the data in a txt file. The form I'm working on now that I created in LC (instead of Word). When I fill the form in Adobe, save and then choose export to txt file, no data export. I have attached two forms: one that works (Unit_5_Preparate) and one that does not (assessment_template_test).

  Thank you!

  Hello

  It was a learning experience (no pun intended).

  If the LC Designer form is saved as 'static' then you will be able to export the data to a text file. If the form is saved as 'dynamic' then you won't be able to export to text file.

  See the file saved as static.

  Good luck

  Niall

• to access the txt file in vi executable

  Hello

  I built a UI for a project im working on. The data entered by the user on the interface are stored in a text file to the closure of the programme. Currently, it works fine but when I create an executable of my code, data are not written in the txt file to the fence. Is it possible to build these types of screws, special

  Code to write to the file is located in a sub VI and I use the function "Write to the spreadsheet file", I go to 'C:\Documents and Settings\asha264\Desktop\Single Line\Single (9.0)\Data.txt Line' reference.

  Thanking you,

  Adnan Sharief

  Make sure that your means of signalling of other vi until the output is not a condition of competition inadvertently. Don't forget that LabVIEW is data flow language, to make sure that certain events occur in a certain order, that there is a dependecy signal to force the order of execution. I got bit by that recently, when we used a functional overall to report all the different programmatic loops in the vi while it was time to stop. There was at least one place where, under certain conditions, the Terminal stop loop became the front signal had executed the "stuff" in the loop. Put an in/out error on the FG, then put in the error line after the functions (in fact file writing) guaranteed that the Scriptures of file occur before that the 'exit' condition was assessed.

• UTL_FILE to read a txt file? error

  Hello.
  I'm tring to read the data in outputfile. TXT file when the data are several lines
  the followig PL/SQL works well. BUT the problem when the outputfile. TXT file
  has a long lineage (maybe 500 words). I got this error.
  
  
  
  My problem of long line or another problem, but I can't make it. ?
  
  
  SQL > create an output directory as "c:\output";
  create an output directory as "c:\output".
  *
  
  SQL > grant read, write on the output of the ayham1 directory
  2
  SQL > declare
  2 f utl_file.file_type;
  3S CLOB;
  4 start
  5 f: = utl_file.fopen('OUTPUT','outputfile.txt','R');
  6 loop
  7 utl_file.get_line(f,s);
  8 dbms_output.put_line (s);
  9 end of the loop;
  10 exceptional
  When 11 NO_DATA_FOUND then
  12 utl_file.fclose (f);
  13 end;
  14
  15
  16.
  declare
  *
  ERROR on line 1:
  ORA-29284: error reading file
  ORA-06512: at "SYS." UTL_FILE", line 106
  ORA-06512: at "SYS." UTL_FILE", line 746
  ORA-06512: at line 7
  
  FYI outputfile. TXT does not create by me. It always creates on the other system.
  
  Published by: Isabelle Sep 17, 2012 01:49

  Hello

  Assuming that the file itself readable, you can try using the fourth parameter of FOPEN.

  declare
  f utl_file.file_type;
  s CLOB;
  begin
  f := utl_file.fopen('OUTPUT','outputfile.txt','R',32767);
  loop
  utl_file.get_line(f,s);
  dbms_output.put_line(s);
  end loop;
  utl_file.fclose(f);
  end;
  

  Kind regards
  Ousseni

• Import data from txt file with the reading of the names of columns

  Hello

  After changing the export of my simulation program, I can't use the postet heresolution, that works well. (I mark the message as hailed this is why I run a post only)

  Can anybode if you please tell me how to fan the code to import the new txt file type. The names of the columns here are FOA online first columns, like this (with ignoring the first lines).

  Hello Gabriel

  You can use the use wizard (Navigator > file > use wizard) to define a new filter to import file for your data. It will take only a minute.

  Please find the uri of the file that I create for you. Copy the attached file in your disk, unzip it and double-click the file uri.

  Then you can open your file by using 'open with '.

  Hope this helps

• write data to a txt file

  Hello.

  I use visa and serial Protocol in my vi n want to save the data from MCU in labview to txt file format which, in the data record in each row not each tab.

  I want to just save not given time. Meanwhile, I plot the data in the chart.

  I search in the forum and consider the posts but can't find a solution.

  
  

• Problem with registration of data in the txt file

  Hello

  I have 2009 Labview, Labview real-time 2009 and cRIO 3.3.0. I also NEITHER cRIO-9024 more cRIO-9112 chassis and modules.

  I would like to save the data measured modules in the txt files, but I want to do in a period of time to time desire. For example, I want to save data of measurements of 60 seconds and repeat every one hour. I of the project (in the file attachment vi) and normally it works fine but I noticed that the recording of the data is not correct. I mean it seams to save what was in the memory before. That's the problem with Windows XP I have check with another computer with Vista and it seems to be ok. It seems that on XP the buffer (refnum?)  is not clear and it retains the previous values.

  Can someone explain to me why it happened and how I can obey Windows XP? Or maybe there are techniques to clear the memory buffer/refnum for rescue?

  Thanks for any help.

  Kind regards

  Kamil

  
  

• Write data to data acquisition in a .txt or .csv file

  Hello

  I want to write the DAQ data inot a file .csv or .txt, so I'll try to handle 'Write in a spreadsheet file', can cause I can record data in all formats. My concept is that data acquisition data will save in a file continuously when I press the button IT and when I press STOP button then it will ask the user to save the file.

  I have attached the file VI.

  But my problem is that every time he asks me a new file even if I put the file append as true.

  All of the suggestions.

  Thank you

  Chotan

  Try this

  

• How can I get data (txt file with data from the 5 sensors) in a graph?

  I have a txt file that reads

  time, data1, data2, data3, data4, recentes5, yes/no

  example:

  0,450,427,421,480,622,0
  4,561,513,478,466,540,0
  8,547,531,510,492,515,0
  12,528,524,513,495,525,1
  36,531,524,515,505,534,1
  65,537,528,519,511,539,1
  

  Where the last song realates to a buzzer

  I need a chart that shows all 5 data point (so a graph with 5 lines)

  How can I do this?

  Also, is there a way to show the Yes/No part in LanView?

  Here it is:

  

  It's very simple.

  1. open the text file in a spreadsheet file.  You can connect a control of path or if left blank, it will prompt for a path.

  2. set the comma as separator.

  3. display the values on the graph.

  I just added a digital table indicator so that you can see the values as exactly those of the file.

  

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• How to read a .txt file sampling rates

  Hello I change a code so that instead of having the sampling frequency that is integrated, I read it a .txt file.

  I would like to know if anyone can tell me how to do this?

  I use currently reading (I32) key.vi to do. Please take a look at the pictures for a better understanding

  
  

• Reading data from txt file and move the engine for the data

  At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

  Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

  Function table index

  https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/