1059 Error - cannot get 11 channels of data written in the spreadsheet file

Similar Questions

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• I can't open XLS attachments in an email... error = cannot find ' C:\users\---\appdata\local\microsoft\windows\temporary internet files\content. IES

  I can't open XLS attachments in an email... error = cannot find ' C:\users\---\appdata\local\microsoft\windows\temporary internet files\content. IES

  You have Excel installed? If this isn't the case, get this viewer.

  Excel Viewer
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Header / data in the spreadsheet file

  Hi all

  I'm writing the header + data as shown in the picture

  It works fine, but the problem is, at the beginning of each table, it's to create a tab as shown in the fichier.jpg 'exit '.

  could you say what mistake I have done

  Thank you

  Nordine salvation,

  Write spreadsheet converted file.vi table entry to a string using the String.vi worksheet default it convert table to string with delimiter tab so get you tab in the spreadsheet file. I enclose a jpg file that will work.

• How cut the length of the string IE channel name here, if it exceeds 20 characters or letters. The channel name is dynamically analyzed the spreadsheet/xml file.

  How cut the length of the string IE channel name here, if it exceeds 20 characters or letters. The channel name is dynamically analyzed the spreadsheet/xml file.

  My Council of Europe in the .js file is

  function generateHTMLMarkup (i, channel) {}
  Alert ("this is lang" + str);
  var str ="";
  "Str += '.

  ";
  str += "" +
  "" channel ['name'] +.replace("Low",".") + ""+""
  ";
  "Str += '.
  "+ ""+""+"
  ";
  Alert ("this is lang" + str);
  return str;

  }

  nerateHTMLMarkup: function (i, channel) {}
  Alert ("this is lang" + str);
  var str ="";
  "Str += '.

  ";
  str += "" +
  "" +
  "" + channel ['name'] + "" +.
  "" + "
  ";
  "Str += '.
  "+ "" + "
  ";
  Alert ("this is lang" + str);
  return str;

  etc.

  Give mthe rhythm and the exact code where Ihave tio get implemented.

  in the code, replace change

  channelName var = channel ['name'];

  TO

  channelName var = channel ['name'];

• How to read the data written to the virtual disk

  I use the following VDDK function to read the Flash disk from VMware

  http://bigchainring.kicks-ass.NET/functions/VixDiskLib_Read.html

  But areas of complete disc playback, including empty spaces. I need to back up only the data written to the Flash disk. It is to save the backup disk space (for example if 126 instant KB is written in 40 GB of disk snapshot, then we read only 126 KB and not 40 GB drive). Please suggest the correct way to read the data written to the Flash disk as well as to reproduce the same virtual disk with the data.

  VMware vSphere API queryChangedDiskAreas() can be used to obtain the data blocks in the virtual disk.

  Steps to follow:

  1. get the beaches of block of data (numbers) using queryChangedDiskAreas() API with '*' as argument.

  2 read the data of the specific blocks by using VixDiskLib_Read()

  3. write to another drive using VixDiskLib_Write()

• I get one its Robotics on some of the audio files that I incorporate into multitrack mixing.  That gives a particular file.

  I get one its Robotics on some of the audio files that I incorporate into multitrack mixing.  That gives a particular file.

  Well, the first thing I'd do is listen to the file in waveform (double-click the file and it will take you there) and see if the file itself looks funny.  If it is clean in the waveform, and then make sure that you do not accidentally have some effects activated in the rack of effects for this track.

• Edge Animate error: cannot get goods 'set' reference undefined or null

  I don't know why I'm getting an error 'could not get property "set" of reference undefined or null' when I insert into my edge Animations through Javascript in containers on my page.

  
  

  The error is emitted by version CDN (minimized) runtime at the following address: line: 97, column: 245 Any idea why this would be greatly appreciated! Thank you.

  It seems that this question was because I included the "xxxx_ege.js" file in the head. Who shot, first of all, even before I needed to load in the composition, because he wasn't in sight yet. So I just removed those file and it took these issues.

• Cannot get digital channels will appear on kdl-40xbr7 it worked last week.

  Since my grandchildren where here last week my TV KDL-40XBR7 only list digital channels. When you perform the initial installation, it finds all analog channels digital channel search starts it concludes digital a few then scanning stops at step 4 of 7 and shows the analog channels, but no. I tried everything even to put tv back to factory settings and install still no digital channels. Does anyone have an idea what could be wrong thank you.

  discovered step son plugged a device bundles and it corrupted digital firmware. I downloaded the firmware and loaded on the TV and everything works fine now.

• Cannot get my Presario C700 to connect to the internet only connects local

  I can't get my presario c700 to connect to the internet. get only the local connection. I tried using the website of compaq, microsoft, and atheros site. Nothing works. I downloaded a bunch of different drivers. I found several forums with links to the drivers who have helped, but when I click on them they cannot be found. Extremely frustrated. All my other devices connect completely so I know it isn't my router.

  Compaq Presario C700

  Atheros AR5007

  Hello:

  This driver should take care of this problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Cannot get windows 7 sp1 to charge through the installation... then says 'Setup sp fail' changes back

  Cannot get windows 7 sp1 to load either with download or install disk... takes a lot of time then configures up to 99% then says 'default configuration restoration of service pack changes' which can do so he can install

  Hello

  Please, try the steps outlined in the article below and check.

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  I hope this helps.

• Press on getting my vSphere and vCentre to display the vmdk file for my vmx file

  Hello, I was wondering if you could help me.

  I got some virtual machines also in my company to implement for a demonstration we will have soon. We currently have a demo system implemented with vSphere and vCentre 4.0.0 uses. We have been given the files have been imported into the data store vCentre via vSphere interface (see Datastore.bmp)
  I added the virtual machine on my inventory, but when I try to turn it on I get the following error messages (see Error.bmp and bottombar_error.bmp)
  How can I get the vmx file (which I'm trying to power on) to show the vmdk (hard drive) file?
  I looked in the edit settings section and made sure that it points in the right direction and I am all of these ideas.
  Concerning
  KatieV

  Welcome to the communities.

  I found follow Ko, may help you http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005628

  GL

• How to solve Link Error - incompatible type declarations projects to external symbol in the nidobj files

  After having included an implicit call to a dll, I created in LabVIEW, I get the error link next project, incompatible type declarations for external symbol '_TheActiveMeasurementPath' modules ' c:\Home\EChamberSystem\cvibuild. ECALsystem\EGunControlHandler.nidobj' and ' c:\Home\EChamberSystem\cvibuild. ECALsystem\AlarmsAndWarnings.nidobj'.

  What does that mean?

  After checking your function prototypes as Ray says, I just delete the directory cvibuild (under the directory of the project) which is where are all the niobj files and rebuild your project.  There is a rare combination of events where the compiler/linker CVI knows not to rebuild it.  If you remove the cvibuild directory, it will force you to completely rebuild.

• How to find the number of days between 2 date elements in the XSLT file

  Hello
  
  I need to calculate the number of days between 2 date elements (type xs: date). Can you please direct me as to how I can do the same thing.
  
  I work in 11g and using XSLT 1.0. I tried several options but yet to get a solution for this. I think that this can be done also using XSLT 2.0, but who has not worked for me.
  
  Can someone please help with this problem, thanks in advance!
  
  Thank you
  Anju

  Hello

  Have you seen this message?
  Re: Get the Date difference between 2 values of date in days

  You can do in the XSLT file since the dates are in ISO 8601 format.
  http://www.w3.org/TR/NOTE-datetime

  Here is a sample XSLT...

  The XSLT above will result in * 4 * for the next entry...

  
  2012-01-11T00:00:00.000-05:00
  2012-01-15T00:00:00.000-05:00
  
  

  You can test this example here...
  http://xslttest.appspot.com/

  I hope this helps...

  See you soon,.
  Vlad

  It is considered good etiquette to the answerers rewards with points (as "useful" - 5 pts - or 'correct' - 10pts)
  https://forums.Oracle.com/forums/Ann.jspa?annID=893

• How to get previous value of an attribute in the VOImpl file?

  Hi all
  I want to compare if the current value of the attribute VO A1 is equal to the previous value of the A1 when the value of this attribute A1 gets changed, how to get the previous value of the A1?
  I know that in the VORowImpl file I can use this.getA1 () which returns me the current value of the A1, but I don't know how me may return the previous value?
  
  Appreciate your help in advance!
  Thank you
  Yvette

  getPostedAttribute the value of the attribute as it was queried from the database.
  Here is an example written in EmployeesImpl

      /**
       * Sets value as the attribute value for Salary.
       * @param value value to set the Salary
       */
      public void setSalary(BigDecimal value) {
          Object attribute = getPostedAttribute((EmployeesImpl.SALARY));
          if(attribute!=null)
              System.out.println("Attribite value " + attribute); //this will give you the value as it was in the data base before you modified it.
          else
              System.out.println("attribute value is null");
          setAttributeInternal(SALARY, value);
      }