Sample with LR5 color

Similar Questions

• How to sample the real color of dimmed model

  I thought there was a way to do it... but can't seem to remember. I placed a picture in a layer as a model of gray at 30%. I want to trace on this image in a new layer. I thought there was a way to sample the real colors of the placed image (not the faded colors) with the eyedropper tool. Thank you.

  Land of Chad,

  If you link the image you get the colors faded, but if you embed the image you pick up the colors of the image (with the restrictions noted Jacob).

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each i

  Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each...

  Try:

  • Colorful tabs: https://addons.mozilla.org/firefox/addon/1368

• Tecra M2 errors with screen: colors black, white & Rainbow fade in and out

  My laptop screen fades in and out with the colors white, black, grey and Rainbow. No command/function is able to accomplish. When I disable (using the power button) and back on, it goes back to wipe the screen. My laptop is currently useless. Someone had this problem? Any help for a novice? Thank you

  Hello

  The best thing you can do is to test it with the external monitor. If the external monitor shows your desktop well probably the LCD is faulty. By the same result on the external monitor, the problem may be caused by a faulty graphics card.

  That's all that I can say about it.

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Convert 2d table in Jpeg format with intensity color ramp graphics

  I have a chart 2d of some size m x n I want to convert a jpg with the same resolution (IE, I want the jpg to have n x m pixels). I view this table 2d in a graph of intensity. I am currently using flatten pixmap to convert my table 2d in an image and then saving it as a jpg file. Unfortunately the colors don't come out like I want. If I try to use table of colors in the graph of the intensity of the colors come out correct, but erroneous values are associated with colors. I want the color scheme to match exactly what I see on the screen in the graph of the intensity of the jpg, but I want the full resolution of the 2d array.

  I've attached an example of what I'm doing. IntensityGraphColors.vi has a chart showing the table 2d with a color ramp special z-scale, this just vi takes the 2d table and the table of colors on the graph of the intensity and records them in a jpg of intensity. But when I save a jpg file colors come out different, as shown in test.jpg.

  Thanks for the help. I tried searching for similar questions, but could not find any solution that did what I wanted.

  Here is an example that goes from black to blue to white, which will tell you if all goes well in the right direction to do what you want with the entrance of "colors".

  Please note that the colors entry is ignored for the 24 bits of data.

• How to draw with multi colors in a single graph XY?

  Hello

  I do hesteresis measures. In this case, I collect the data while sweeping the voltage first from 0 to 2V and then again from 2V to 0V, and the data is plotted in a unique XY Chart. XY graph, I want sweeping plot forward a color while the scanning reverse with another color, so I can easily make comparisons. And I want to see the real time data. I tried to wire 'plot color' in 'property node', but that will change the color on a global scale and cannot be applied to a data section. Can someone tell me how to proceed? Thank you!

  Guanglei

  Hi Guanglei,

  see the attached example.

  It will be useful.

  Mike

• Graph XY overlay multi field with different colors

  Hello

  I want to make a cyclic XY one track loop and plot the graph for each cycle in different colors.

  I want a field like XYgraph2 but with different colors and probably even without this line of tracing. How can I change my schema?

  Thank you for your time and your efforts.

  KOUYATÉ

  Try this.

• acquisition of continuous sample with multiple channels

  Hello! Please tell me what I'm doing wrong here, I'm confused about how the acquisition of continuous sample with several channels (using NI USB-6215 boxes).

  Following code is python code, but I don't know who confuse you (and it's only a part of my code in order to not try, it won't work

  buffer_size = 2000 #samples to read
  sampling_rate_hz = 20000
  channels = "Dev1/ai0 ai1/Dev1" #this can be a string or a large number...

  CHK (nidaq. DAQmxCreateTask ("", ctypes.byref (taskHandle)))

  CHK (nidaq. DAQmxCreateAIVoltageChan (taskHandle, channels,"", DAQmx_Val_Cfg_Default, float64(-10.0), float64 (10.0), DAQmx_Val_Volts, None "))

  CHK (nidaq. DAQmxCfgSampClkTiming (taskHandle,"", float64 (sampling_rate_hz), DAQmx_Val_Rising, DAQmx_Val_ContSamps, uInt64 (buffer_size) "))

  CHK (nidaq. DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Acquired_Into_Buffer, uInt32 (1000), uInt32 (0), EveryNCallback_func, None))

  CHK (nidaq. DAQmxRegisterDoneEvent (taskHandle, uInt32 (0), DoneCallback_func, None))

  the callback function #and

  def py_EveryNCallback_func (self, taskHandle, event_type, nSamples):
  data = numpy.zeros ((self.channel_amount,buffer_size,), dtype = numpy.float64)
  read = int32()
  CHK (nidaq. DAQmxReadAnalogF64 (taskHandle, buffer_size, float64 (10.0), DAQmx_Val_GroupByScanNumber, data.ctypes.data, buffer_size * number_of_channels, ctypes.byref (read), None))

  With only one channel, everything's fine, and tension diagram looks like this:

  

  buffer_size = 2000, sampling_rate_hz = 20000

  But if I use two channels, voltage diagram looks like this

  

  buffer_size = 2000, sampling_rate_hz = 20000

  It looks like the sampling rate is higher or there are fewer values?, but with two channels with the results table is 2000 * 2 long and with a single result is 2000 * 1 long is not smaller

  most of the settings important (?) in my code:

  DAQmxCfgSampClkTiming "float64 rate": 20000 (sampling_rate_hz)
  'UInt64 sampsPerChanToAcquire' DAQmxCfgSampClkTiming: 2000 (buffer_size)
  DAQmxRegisterEveryNSamplesEvent "uInt32 nSamples": 1000 (?)
  'Int32 numSampsPerChan' DAQmxReadAnalogF64: 2000 (buffer_size)
  DAQmxReadAnalogF64 "float64 [] readArray": [[buffer_size] * number_of_channels]
  'UInt32 arraySizeInSamps' DAQmxReadAnalogF64: buffer_size * number_of_channels

  as you can see nSamples is a big question mark, but the problem still exists if I set variable buffer_size y (2000)

  Hi Dazzler,

  It is not a multi-channel example that ships with the driver, but after a quick look at the code that you use in your third post, everything seems to be configured correctly. The only thing I was thing I got a question about your plots. Looks like you draw each time the same number of points. If you draw just the table of data directly from the playback feature, you need to draw (buffer_size * number_of_channels) number of channels since the data returned is as an interlaced array. You can also choose to deinterleave samples. More information about this lie in the NOR-DAQmx C reference help, which is installed with the NOR-DAQmx driver.

  Kind regards

  Kent

  Technical sales engineer

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• Im having trouble with the color on my xbox

  I have problems with the color on my xbox since I did an update, as well as I was updating a pop up was held to let me watch the first of the new game black ops, the color is off and I can't play my game like this. What can I do about it?

  Hello

  Answers has no influence on the XBox or XBox Live must
  contact with them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Saving the Image with the color card

  Hello world

  I wrote a program to save an image of an infrared camera. When you complete the last photo is saved. Works of great savings, but even if I combine it with a color of card, always gray sound when recording in png. I would like to know where I can save it in the same color card, as shown during the program run. I appreciate all the help that helps... ^ ^

  see you soon

  xridder

  
  

• What is subfolders with blue colored letters in my program folder windows that look at this $ $MS13Uninstall_kB893803v2?

  I want to know what are subfolders with blue color lettrers in my program folder of windows that look at this $ $MS13Uninstall_kB893803v2.

  These files contain data for uninstall programs and updates.

  they are created during the installation of the programs and updates and contain a card to the back/improper installation.  so if the uninstall files are deleted manually, then the system loses the ability to uninstall all files and registry keys that have been installed.

  so for the example provided in your thread topic, that particular file refers to the kb893803 and you'll find probably listed as a windows update in afforestation programmes.

  You can also search the Web for more inforamation on that Ko.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• HP Photosmart C4340 all-in-one: print with pink coloring

  Since last week, my printer is priting photos with pink coloring. Don't know the reason. I can't not stop printing for a week. Please help me... what I would do. What is the problem. ?

  Hi Shubhroneel,

  I'm sorry, your pictures don't print as expected.  It is likely that your color cartridge is a color that is distorting the colors printed.

  Follow the steps in this document to print a diagnostic page.  You will be able to tell whether a color is missing.  You may need to replace a cartridge.

  Let me know if this information helps you.

  Jean