Error 80070663 with Windows Vista update
I'm doing the update of windows on my Windows Vista computer and I get the same error code 80070663
* Title *.
I'm doing the update of windows on my Windows Vista computer and I get the same error cod 80070663
Heather,
This is an article dealing with questions with this error code: KB913754
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
original title: problems with Windows VISTA update
I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.
- 9 47 code
- Code 800070002
- Code D 80024200.
Is there a resolution to do the same thing?
Hello
Did you change your computer?
I suggest you to follow the methods and check.
Method 1:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareMethod 3:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?
http://support.Microsoft.com/kb/958044
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Problems with Windows Vista update error code I get is Code: 80096001
Hi gang,.
I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.
Thank you
What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?
You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.
(When was the last time you checked your system for malicious programs?)
Suggest you try to have the system scanned both of the following in this order - do not jump...
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/products/malwarebytes_free>
(MBAM) Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
In addition, scan with the free Version of (SAS)
http://SUPERAntiSpyware.com/superantispywarefreevspro.html >
How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>
ESET Online Scanner
http://www.eset.EU/ESET-online-scanner>
Access the article KB971058 via Internet Explorer (only)
If no malware is present - How to reset components Windows Updates?
http://support.Microsoft.com/kb/971058>
Download and Save the fix it 50202 from the page above.
Close all the open browsers and programs prior to execution of the fix it.
Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.
When he finished, check if download updates now.
If the updates are still not download after you run it, then run it again and choose his Aggressive mode.
Then reboot and see if the download updates now.
UTC/GMT is 19:30 on Friday, October 7, 2011
-
Error 80070422 with Windows Vista
I had a problem with windows update for the better part of a year now, and attempts to solve currently have not succeeded, so I hope that you guys might be able to help.
Windows Update refuses to check updates and refuses to download updates recommended that getting through the cracks (updates Windows Defender since earlier in 2015). Whenever it comes up with the same error 80070422.
I always feel light defender of windows that it seems that the default option is. I regularly have antivirus and antispyware scans and they came to own.
I tried to update manually and I tried Microsoft fix it but the problem persists. I also added http: & https://*.microsoft.com to my reliable internet sites such as suggested by another user. My laptop does not recognize the file from the Windows Update troubleshooting tool, so I've not yet been able to try this. What kind of file (that I'm likely to have already) should I open it with?
If anyone has any suggestions, they would be welcome. Thank you!
Hello
I suggest you follow the steps in the following link:
Windows Update, error 80070422, 80244019, or 8DDD0018
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018
Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
See also: https://support.microsoft.com/en-us/kb/958043
It will be useful.
-
Error WindowsUpdate_80070643 with windows Vista updtaes
From early August I tried to download the latest security for my PC Windows Vista updtae. I receive the error message listed above and am not sure if I can use the cleaning tool Framwork that I saw mentioned on the net as it addresses than this EPI 2 is built into Vista. I'm not an expert user, so I'm unusre need my lines of conduct are (other than the purchase of a Windows 7 upgrade0
Thank you
DECooke
Hi DECooke,
I suggest you follow the steps in the articles of.
http://support.Microsoft.com/kb/KB976982
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643
-
is still no solutions that help with windows vista updates!
The only update that installs is for windows defender. I tried the command fsutil reset prompt, not help.some time I received a message in windows update to install this software update {1138506 A-B949 - 46A 7 - B6C0EE26499FDEAF} in order to download an install my updates, but again this update of the software doesn't install not either! There are so many error codes that I can't write them all in this post. One who appears most of the time is 8007000 b. Does anyone have a solution for this problem? ONCE again, I want to tell you PLEASE HELP
Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
Error message when you use Microsoft Update or Windows Update Web site to install updates: "0x8007000B"
http://support.Microsoft.com/kb/956699What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How to fix error 646 in Windows Vista update 2680317 update
Tried all ways but failed even after disabling firewall. Please let know us if this can be done manually. Thank you
Hello
See if this helps you:
"Error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update.
http://support.Microsoft.com/kb/2258121
See you soon.
-
I have problems installing Microsoft SQL server 2005 express edition service pack 3. When I use windows update Setup does not exceed 0% and crashes. I tried to download the service pack online. When I ran the installer, it crashes when you try to install SQL server database services.
Any help would be much appreciated.
Hello
Download SQL Server 2005 Express Edition Service Pack 3 from the link below:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=3181842A-4090-4431-ACDD-9A1C832E65A6&displaylang=enRestart the computer in safe mode.
http://www.computerhope.com/issues/chsafe.htm#03Install the update in safe mode and check.
Cheers and enjoy!
-
Error code 646 Windows Vista update.
I have daily automatic updates. It is a download of Security window, but it always failed.
* original title - on downloads 000646 keeps trying to download every day, but always fails.*
Please use this Microsoft Tutorial:
http://support.Microsoft.com/kb/2258121If this does not help, please repost in the Windows Update forum:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=no
-
Windows Vista update runs continuously
Update of Windows Vista has not been completed since mid July 2016. Manual start and it works continuously without finding anything or finishing, I read on internet to clear the cache I've done (loss of the history of the update), but this does not resolve the question can someone move me to a solution that works?
-
Hi, I get this error msg everytime that restarts my system (with Windows Vista), pls help:
Windows cannot install the important updates:
(1) KB978542(2) KB971644
(3) KB974470(And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.
1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. for good measure, reset IE now by http://support.microsoft.com/kb/923737
5. now to reset Windows Update by...
How to reset the Windows Update components?
[Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in the default and aggressive modes]
http://support.Microsoft.com/kb/9710586. restart once again & test.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?
original title: error code 80070005
Help us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395 -
Message came that said my copy of Vista can be victim of piracy and go online to validate that, I did it because I have been using this OS for more than 3 years on a Toshiba laptop with Windows Vista Home Premium 32-bit p2000 series. a few hours later my computer said it needed to restart and once it restarted it has a black screen with a message that he was trying to repair. It could not be repaired so he asked if ok to go to a restore point and clicked on Yes. I get the message that my copy is not genuine and my computer wants to restart once again, but I'm the delay of four hours. I did the command line to try to restart the service and access has been denied. 0x80070426. I found an ad on the forum and tried the steps there, but he failed. Mistake was 54. http://social.Microsoft.com/forums/en-us/genuinevista/thread/de089d6e-63b4-4D6E-b955-30bb8e9525d3. I had to contact support and have been waiting for more than 24 hours for assistance. My Control Panel opens and goes away, but I could remove tweetdeck which is among the most recent installations of software I did before this all happened. I am also running xampp on my desktop and I tried to put in place a virtual host by using a different port - could not get that to work and changed the host to the original file. Could it be the problem? I hope I did not reinstall my OS and destroy my computer :-(I also ran Microsofts diagnostic tool and write it here:
Diagnostic report (1.9.0006.1):
-----------------------------------------
Given WGA-->
Validation status: genuine
Validation code: 0
Validation code online: 0x80070426
Cached Validation code: n/a, hr = 0x80070426
Windows product key: *-* - JQMWD - 2QJRJ-RJ34F
The Windows Product Key hash: R8gPTEFMoOygFewoq/uOoWMpz68 =
Windows product ID: 89578-OEM-7332157-00237
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6001.2.00010300.1.0.003
ID: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E} (1)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6001.vistasp1_gdr.090302 - 1506
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
WGATray.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Home and Student 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{E57BD23E-724F-49E7-ACE4-57DC9E2AB49E} 1.9.0006.1 6.0.6001.2.00010300.1.0.003 x 32 *-*-*-*-RJ34F 89578-OEM-7332157-00237 2 S-1-5-21-3871005671-4011101567-1094615180 TOSHIBA Satellite P205D TOSHIBA V1.00 20070814000000.000000 + 00081333507018400FE 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 TOSCPL TOSCPL00 100 100 Microsoft Office home and Student 2007 12 6B5697EF2510F1A Mwy5C4A7Uv VTGRBwWVjHvNqHks plus 81602-909-4685496-68058 1 Content Spsys.log: 0 x 80070002
License data-->
Software Licensing service is not working.--> HWID data
Current HWID hash: NgAAAAEABAABAAEAAQABAAAAAwABAAEA6GGqskaeSvGGg5CmuJF0htam8vSSKt4YXv6sVniqActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP TOSCPL herring
HPET PTLTD HPETTBL
MCFG MCFG PTLTD
TCPA TOSCPL
SLIC TOSCPL TOSCPL00
SSDT PTLTD POWERNOW
ASF! DMA AMDTBLThanks for any help!
ebflute
Hello Ebflute,
I suggest that you perform a repair installation.
Repair facility:
You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)
<><><><><><><><><><><><>
Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.
Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.
<><><><><><><><><><><><>
1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.
2. on the Install Windows page, click install now.
3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.
4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.
5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.
6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.
7 follow the instructions.
Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.
Note: Tit the following settings is reset by default:
Its computer system
Device drivers
Visual effects
Windows Mail
Windows services
If you notice missing files after the upgrade, look in the following folders:
C:\Windows.old
C:\$INPLACE.~TR
C:\$WINDOWS.~Q
These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".
Delete files using disk cleanup
Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895). This update has failed several times now.
I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled. This does not solve the problem.
I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log. The problem highlighted is that the Services of Services SQL2005 database program did not start. Here is an excerpt from the log file...
Product Installation status
Product: SQL Server Database Services 2005 (MSSMLBIZ)
(Previous) product version: 3077
Version of the product (Final):
Status: failed
Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
SQL Express features:
Error number: 29503
Error description: error MSP: 29503 The SQL Server service could not start. For more information, see theI tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully. Event Viewer log contains an error with event ID = 823.
I don't know what to do next.
Can someone help me?
Thank you.
Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart
Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional. Recently I started trying to connect to my wifi at home instead of using the ethernet cable. Research shows my home network and then I connect with
-
Satellite C850 - Bios password
I have a problem with my laptop. It started with me getting a device No. Bootable error message, restart the system. Despite me restart, he would always say this. I searched for help, which was mostly to go to the page of the Bios by pressing F2. So
-
Client VPN ProSafe for DGN2200V4?
Hello About 2 years ago, I bought a router for my holiday home. Now I would like to set up a VPN to connect with my PC to my home (customer-to-gw). Where can I find the ProSafe VPN Client? Is it free? Thanks for your help EDM
-
After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.
-
Problem with the redirection email Yahoo after installation of nine updates
Original title: problem with transfer of emails after having installed new updates I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account.