Saving the Image with the color card

Similar Questions

• Saving binary Image with overlay?

  Hello

  I'm having some trouble in saving an image with overlay information. I use IMAQ find circles to measure the rays of the holes in a binary image. Hole data is then used with oval Overlay IMAQ, draw on ovals to highlight detected circles. Works very well and the image is displayed as expected in the output of the image on the screen, the palette has the binary value. (See the second image of 3, below)

  When I try and save the image in PNG I just get a blank image (black). If I use the overlay IMAQ merge tool, I just get the green circles on the black (see the last picture of 3 below). Is there something I'm missing with pallets/fusion? Any help much appreciated. Snapshot of the (messy) code attached.

  The problem is that the binary image is all zeros and ones.  A normal image goes up to 255, so the value 1 appears black.

  One solution is to multiply the binary image of 255, which makes the image black and white.

  Bruce

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Display of images with a color cast

  I have a problem with the images displayed with a cast on some sites of color (including Facebook and I agree with the image library (I'm a pro photographer).) This does not happen with explore.
  I did screen grabs two browsers and paste into a single document to:
  http://www.images2cherish.co.UK/FirefoxColourCast.jpg
  where you can see the difference.
  This is one of my images, and I actually copied the page when it displays on the website www.photographersdirect.com , but I saw it happen with pictures of other people.
  Curiously, it seems not to happen with each photo.
  Have you any suggestions, please. If this continues, I'm going to have to explore or else, like the colors of the image is really important to me.

  The pref gfx.color_management.enabled is no longer used (you get redirected)

  Don't forget to use the gfx.color_management.mode pref rather (value of 0 disables color management).

  • http://KB.mozillazine.org/GFX.color_management.mode

  You can try setting the pref gfx.color_management.enablev4 true on the subject: config page and to close and restart Firefox to allow ICC V4 based on Firefox 8 +, but this feature is not yet fully implemented, then there may be problems in some cases.

  Test page:

  • http://www.color.org/version4html.xalter - ready for your system ICC Version 4?

• How Lightroom handles images with a color profile in fact?

  Since the relevant help page:

  Lightroom simplifies color management by displaying colors using the device independent color spaces. This means that all you need to do before working in Lightroom is to calibrate your monitor. Then, when you're in Lightroom, choose color or color profiles settings when you are ready to output your photos. (In Lightroom color management )

  So. What actually happens? If a picture has, say, a Nikon sRGB profile not LightRoom it converted Adobe RGB (for the library module) and ProPhoto RGB for module progress? This seems to be the implication of the documentation, but it says nothing about a conversion.

  Basically, my question is - it recognizes the supplied profile?

  justinw86398615 wrote:

  Thanks by.

  While SHIPS go as you seem to say that indeed there is no color profile. Lightroom is just reads the raw data and assigns the ProPhotoRGB profile? There is no conversion. Values in only digital pixels?

  Right, there is no color profile. But something must be used to interpret the NAVE while converting from a raw file (just a bunch of values of levels of grey) typical, to become a recognizable RGB image. Read the digital pixel values is not enough without some sort of reference, and an ICC profile does not work on a raw file, so what happens is:

  Lightroom processes the raw numbers thanks to Adobe by default camera profile for your Nikon camera model. A profile of the camera is not the same as an ICC profile. This camera profile determines the initial appearance and the colors of an image raw before other development parameters are changed, so if you don't like the default look, you can choose a different camera (if available) profile or create your own. You can change the profile of the camera in the tab Calibration of the camera at the bottom of the right side of the develop module. Adobe camera profiles produce a look that is close, but not exactly what you would get showing the NEF in Nikon software or the raw file JPEG preview.

  After this initial conversion based on the camera profile, Lightroom will apply other settings default development module. In Lightroom, the result of this exists in the built-in color space Lightroom (ProPhoto RGB with curve of tone as sRGB) and then, finally, you see the end result through your (if all goes well to date) display the ICC profile.

  Thus, how your look of naves in Lightroom before editing it is affected by camera Adobe profile + default develop settings.

• How to create a vector image with two color fill

  Hi everyone, is there anyone who knows how to make a rectangle to fill with two colors? for example a red pantone 032 C and black.

  What I've done, I've done two rectangles on each other to the same corders.

  The less one I filled out (Pantone red 032C 100% and 100% transparent) and the more with (black 50% and 50% transparency).

  Is it? Is this correct or there is another way?

  Someone help please.

  Œuvres for as many colors as you want. Try it. You should have no problem if you follow my steps.

• How to remove the colors of the table of characters fill colors

  Hmm. I got to ask questions of the pages for Mac screen, but it looks different from what I've seen in the past. So, I hope I'm in the right place. Over time, I selected some colors in the color popup in the character frame and saved.  I tried to change a color by changing the opacity. Then I tried to save this color has changed for the lines at the bottom of the pop-up window.  It did not work. I would have saved the color that appears in the large square on the left.  Anyway my question is how to remove these incorrect colors lines down.

  I know that this little logical so I am attaching the screenshot I'm talking about.  I want to remove the three red squares, two on the line and the other on row down all in the middle of the screen.

  

  Thanks for your help.

  EHW

  HI ehw.

  This is the right place. He underwent extensive design of the overnight changes.

  don't think that you can "erase" the colors that you place in the custom palette, but you can replace them easily using the same method the first time:

  Set up color using the sliders or the color space, and then drag the big box and drop on the color you want to replace.

  Here I replaced two red with white.

  

  Interesting change of color of the header between the two images. Both are screenshots, the left using shift-control-command-4 then pasted from the Clipboard to an empty page in the Pages, the right is the actual color palette. Both were then with SHIFT-command-4 to maks a file that was then inserted here.

  Curious.

  Kind regards

  Barry

• Copy/paste "is the color"?

  Can you not copy and paste the function of the corresponding color?  When I paste attributes, he is not listed as one of the effects of past above?

  I color corrected a certain clip using match color and adjustments to the color card.  Now I need to copy and past these correction on about 100 different clips... but I can't copy the corresponding color.

  If I can't copy it to so I'm going to have a gap of corresponding color and do ALL the settings on mine so I can copy them.  Surely I do something wrong?

  You cannot copy the corresponding color.

  Use comments to make a feature request.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.

  Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.

  What you want to replicate from El Capitan in Yosemite?

  1. The file containing all the samples stored color of the Apple color picker?
  2. The color picker itself?
  3. Both?

  Question 1 is a simple transfer of a single file.

  1. From the Finder, press shift + cmd + G keys to go to the folder. Copy and paste the following in this dialog box:
     ~/Library/colors
  2. The file has your stored color swatch is: NSColorPanelSwatches.plist
     1. On Yosemite, quit Word, Pages and other applications that use the Apple color chart
     2. Repeat step 1 on your machine of Yosemite
     3. Rename (do not remove) the Yosemite NSColorPanelSwatches.plist existing NSColorPanelSwatches.plist.old
     4. Copy the color swatch file El Capitan in Yosemite file location
  3. Launch the applications that use the color chart to see Apple El Capitan from swatches.

• Find the color temperature of light source with neutral card

  Hi all;

  I have an adjustable color LED strip that I would get as close as possible to 6700 Kelvin. I hope that I can take pictures of a neutral light card and set the LED color based on temperature/RGB values, I get Lightroom (5.7.1).  Is this possible? If anyone can help with the workflow on how to do it?

  Thank you very much

  I was afraid of that. The numbers only make sense for a radiator of black body like a tungsten light bulb or the Sun, which is a broadband light source. CFLs are generally pretty well made using a series of Phosphors of rare earths that are tuned to human vision and with emissions enough broadband. If you use several sources of monochromatic light as single color LEDs you could not get good numbers. It really depends on the wavelengths of light coming out of the LED. If the color on your camera filters are not the same wavelength of the LED and the sensitivity of three colors of the sensor of the camera is not the same as your eyes, you can get to a situation where your eye perceives neutral colors while the camera sees something completely not neutral. This is from your two raw files. Your illuminated LED Gray card probably looked to the eye, but to the camera, it looked purple. This effect is called Metameric failure and is common if the spectrum of light is very "spicy". This is probably what is happening in your case. You have certainly three narrow band LEDs that you mix. You are really unable to apply the model of the black body of "color temperature" unique to it and then you get strange results you observe. There are index to record high in special colours of the LEDs, which have much wider spectrum light show who have far fewer problems with Metameric failure and that should work for this purpose well.

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• How to develop Mono with a component of the image highlighted in color?

  Is it possible to use Lightroom to develop an image for the most part, in mono, but with a component of the image highlighted in color?

  Is that what you are looking for?

  CR https://www.google.ch/search?q=Lightroom+b+%26+w+Color+Highlight&ie=UTF-8&oe=UTF-8&gws_rd= & ei = 6 - pVpeGKcyRsAHl7rqgBQ

• Images with text on the same page in epub seem to be changing color to the export profile

  I create a fixed provision epub heavy photo and I noticed that after exporting, pictures with text on the same page are exported with a totally different and much more saturated look to them.  As if they were exported under a different color profile.

  All pages that include no text but just includes a graphic/photo, the image appears normal in the preview.  I tried several things like manually set two different images to specific color profiles.  I changed the conversion to ensure that everything is export in jpg format.  Cannot quite understand how to solve this problem.

  Has anyone experience this problem?

  He solved.  The problem was caused by blocks of text that had their transparency set to 0%.  Removing those, the problem has been resolved.