Samsung SCX4623FW printer, fax, scanner. It worked fine w / WndowsXP. I have recently upgraded to Windows 7
I have a Samsung SCX4623FW printer, fax, scanner. It worked fine w / WndowsXP. I have recently upgraded to Windows 7 w / wireless to the printer. Now, printer and fax work very well, but no connection to the scanner. It constantly displays no message no connection available. Does anyone else have this problem? Thank you.
You must install the full features of your cd of the printer software or the Samsung support pages, according to the instructions of samsung
Tags: Windows
Similar Questions
-
My work PC operating system has been recently updated from Windows XP to Windows 7. An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done. I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?
Hello
Acrobat 7 is not supported and an older version of Acrobat.
Also, it is not compatible with Windows 7.
This could be the reason why you are faced with it.
Please see this link.
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
Concerning
Sukrit diallo
-
I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?
Hello
You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.
You can check: how many computers can you install or run Adobe software on? ProDesignTools
End user FAQ license contracts
Please visit the given link to download CS6: applications download Creative Suite 6
Concerning
Bianka Attre
-
Recently upgraded to Windows 7 to 10. I have Lightroom 6 CD Version Dell PC. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. Is this a compatibility issue? How can I solve this problem? Thanks for any help.
Lightroom preferences, tab performance.
-
Greetings fellow filmmakers! I use Premiere Pro vers.7 & have recently upgraded to CS3, however, I find this pre-existing vers.7 (project files) work even if they open do not fall within the timeline. They are unusable in CS3?
Double click on the sequence imported into the location of the project.
-
Printer: My Scanner stopped working after upgrade Windows 10
Hey,.
Finally, I upgraded my Windows 7 to 10 Windows computer and the scanner no longer works. It prints fine, but when I go to open the scanner software, it just opens and says "add a printer". Any help is greatly appreciated.
Bill
Well first of all, did finish just upgrade? If so, you must make sure, that you have all the updates of Windows 10 - just search for "update and recovery", and then click Windows update. Make sure that everything is up to date. You should also completely shut down the computer and restart it at least once before you start troubleshooting.
If you have done these things, and you get the screen asking to add a printer, then the link between 10 Windows and HP full feature software (Printer Wizard) is broken. The best way to recover is to uninstall the software from programs and features and then reinstall it. Go to http://123.hp.com/us/en and look for your model of printer, download the latest version of the free full version software.
If you need more information, see this HP support document: http://support.hp.com/us-en/document/c05212298.
Good luck!
-
Satellite C660-10 d - get my old printer and scanner to work
I would like to ask advice on how to get my HP 1020 Laserprinter and HP G2710 Scanner to work with my Toshiba Satellite C660 Windows 7 (Home Premium) 64-bit respectively?
The software of the printer (pilot) is not installed correctly while the Scanner does not charge same atal. I hope that it is ethical to mention other products on the forum of the society. Otherwise, my apologies.
Hello
I put t think that the problem is related to Toshiba
If your printer and scanner are old enough, I could imagine you don t get the drivers for Windows 7. You should check this page: P directly if the Windows 7 drivers are available or not.
If Yes, download and install it, it s the same as on other laptops and computers. If no driver available devices are not compatible with Windows 7.
-
my printer/fax, etc is HPOfficejet4500 Wireless-, he has never worked as a wireless printer, but I just connect. This isn't my main problem today. It is in power saving mode and I can't get out it works
A simple reset should solve this problem immediately. Remove the power cord from the back of the printer when the printer is still on. Wait about 30 seconds and plug the power in. The printer should reset and return to normal operation.
-
I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.
Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!
-
I have a Samsung RV511 which is only a couple of years. It has been disconnected from the internet every 2 to 5 minutes or more, but my router works fine. I got a new power cord, ethernet for her, but the computer continues to disconnect. When I diagnose the problem, it indicates the server DNS does not. Tried to contact my internet provider, but they couldn't understand why I didn't know every little thing on my computer and made me feel pretty stupid so I'm curious to see if anyone else out there it can help.
I used to get this problem. My connection would get a yellow top warning symbol & I could no longer communicate on the internet. No Windows diagnosis could correct & would only sometimes identify [as a DNS problem].
I searched for advice, but never really found a convincing explanation or an appeal. I started using the commands below [that I found in this forum] to restore things. It seemed most of the working time.
Several people also suggest just reset the router, but that was irrelevant, because I haven't used one but I tried to remove and then reconnect the modem USB and sometimes helped.
The problem seems to occur in phases, but I could never understand what was different between the good times & bad times. I've always suspected the software controlling my USB modem but could never be sure. I changed the USB modem & the problem went away for months before returning [but less frequently than before]. Now, I have a wireless connection with my mobile phone and use it as my modem for internet connection - 5 months without problem.
What I did was to open a command prompt [I think he should be executed as administrator], then type:
netsh winsock reset
RESTART THE PC
netsh int ip reset
RESTART THE PC
ipconfig/flushdns
ipconfig/registerdns
RESTART THE PCAs I say, this procedure allows to sort out most of the time, but it should reappear later.
-
Upgrade to Windows 7 Pro 64. Loaded Shadow Run, works well, tried to play Halo2, which was already on the machine, and it does not open. I get an error message that the server is already running. I tried the compadiblity box and disconnected the modum by forums, it still does not work. Thanks for all the ideas. Mike Moczan
Hi, Mike Moczan,.
Welcome to the Microsoft Answers site!
I suggest you to load the game in a clean boot state to see if the problem is not caused by the interference of any third-party application.
To perform a clean boot on a computer that is running Windows 7, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
http://support.microsoft.com/kb/929135.
In addition, see the section on how to restore your computer to a Normal startup mode.
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.
Go to C:\Program Files
Remove the McAfee program from there folders
Restart the installation again.
Also:
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
-
I have a HP8710W recently upgraded to Windows 7 teacher how to charge LED working again?
I have improved my HP8710W for Win 7 Professional to XP. Everything was going well after quick search for drivers. The only thing that doesn't work does not correctly is the charge LED which does not indicate if the laptop is charging or not. The battery level takes into account 54% when the power is connected and not an indication the power down 54% usually last about 1 hour. How can I get the LED indicator of charge to reflect what is happening in the charging circuit and the status icon to display with 0 to 100% accuracy?
I think it might be time for a new battery. The upgrade to Windows 7 just happened to coincide with the end of the battery. Otherwise, keep loading up and empty. Don't let the battery go below 15-20%. The meter of the charge should obtain more specific that you run through a few cycles. Also check in the setup of the BIOS [F10] to see if there is a battery test.
-
3054 DeskJet not printing but scanner not work
Hello!
I have a Deskjet 3054 by label on the printer, but the IP address it's Deskjet 3050 all-in-One J610a. My computer is Mac 10.9.5. I read through other posts and have updated all my software via Apple Software Update.
The symptoms are as below:
-Scan works (I can scan a page and view it on my computer)
-Œuvres report printer (this is where I got the IP address)
-The Mac printer & scanner, the printer is recognized and connected
-However, when I print a document, the queue is displayed, shows that the work is being processed. However, the printer does not move. I do not hear the cartridge move. Then the queue indicates that the work is completed and the queue is empty.
Help, please!
Thank you!
In the Moonlight
I want to help you print from your Mac to your Deskjet 3054. I understand that the print queue says that the print job has been done, but nothing prints. Please follow the steps below and let me know the results of your efforts;
Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
eStudio 281 digital copier, printer, Fax, Scanner
Hello
We have a Toshiba eStudio 281, which is connected to a Microsoft Windows network. I want to ensure that only certain users can print in color on it so that other users can print only in black and white. I can't find this information in the manuals I have.
Any help would be greatly appreciated.
Thanx.
Hello
You will be very happy if someone on the support forum for computer systems can help you with a digital printer. In my office, we have the same situation you want to have. To save money each user and choose between color and black and white printing.
Unfortunately, I really put t know how it works and can not help you. Try to contact the dealer. Maybe they have contact with Toshiba printer support.
Good luck!
Maybe you are looking for
-
you are looking for compatibility every time that I get on the net? can I turn this off? It takes forever? I don't think I even custom add ons
-
G5 Dual-Core Intel Xeon 2.66 performer 10.6.8 can I upgrade the Mavericks
I am the owner and working on a Mac G5 Dual-Core Intel Xeon 2.66 GHz running 10.6.8 can I upgrade the Mavericks?
-
How to remove "Recommended download" such adware or malware?
How to remove the thing place?
-
Boot from the cd/dvd internal
Hello, I have a hp d035-dx that will not boot from cd/dvd drive. Please advice. The startup option, there is no option to boot from the cd/dvd drive
-
Question related to Windows 2008 R2 license
Dear all, I have a degree in paper for windows 2008 R2 license are mentioned him Std/edition os server OS. Please tell me what edition of the server operating system, I bought? Can I install Windows 2008 R2, enterprise edition?. My paper license look