Samsung PC battery problem because it won't turn up until turn on the power using the main power source (no battery))

Similar Questions

• Elitepad 900 won't turn on without power in socket

  Hello, I just got an elitepad 900, it works very well when I power is still plugged in and also when the power cord is connected almost in (just a little bit in which he dosnt fresh but it is always plugged.)  but the second that I remove the power cord completely, she stops and I can not activate it until I plug the charger again...
  
  I don't think it's the battery because there is a lot of power on it and when the charger is plugged in barely there dosnt fresh and the Tablet still works.
  
  Hope some of you can help me

  @jofftheman

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• Monitor won't turn on after power off

  Any ideas on this problem:

  I have my performance to save energy mode game to never put the computer to sleep and turn off the monitor after 10 minutes.

  When I go to move the mouse or use a combination of keys the monitor will power not to again.

  The only way I can use the computer is a strong power down and restart.

  The computer is a Dell XPS 430, 6 GB RAM, Q8300 Quad core, 750 GB hard drive)< 25%="" used)="" vista="" home="" premium="" sp2,="" dell="" s2209w="" monitor,="" logitech="" mx400="" laser="">

  I've updated the video drivers BIOS, drivers for the mouse, and all other dell update had to offer.

  Any ideas?

  Thank you very much
  Curt

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Click on change the game settings under Performance - restore default settings - save the changes

  Go back and set the settings and the advanced power settings as you wish - apply / OK

  =======================

  If necessary:

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't save it as Narrator on PowerPoint. He says that I don't have a microphone. My microphone works because I can save otherwise, but there is a problem because I look like a squirrel!

  original title: Chipmunks in my computer!

  I have 2 problems. First of all, I can't save it as Narrator on PowerPoint. He says that I don't have a microphone. My microphone works because I can save otherwise, but there is a problem because I look like a squirrel! I put the voice until the lowest level I can.

  I guess it's a problem with the microphone, which is probably broken somehow. If it is a taken as opposed to a micro USB microphone, you can get a micro usb to a friend (if possible) to test if it works using the microphone or not.

  I say this because I had a microphone jack and he also had problems, as I've never had a problem with my USB microphone.

• Defender won't turn on error 0x800705b4

  Original title: Defender problem

  Defender won't turn on error 0x800705b4

  Defender won't turn on error 0x800705b4

  You are running Microsoft Security Essentials, AVG, Norton or McAfee? If you run one of those, she didn't have Defender. It's good, not bad. Not only is there potential conflict, but there is no reason to have both; basically to have something very similar to the built-in Defender, and both running at a time will be your performance level and create the risk of problems that are contrary to the other.

• Security Center or the firewall won't turn. message bed Security Center service cannot be started.

  due to an unidentified problem, windows is unable to turn on the firewall

  Hi Mary,
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following four:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian

• iTunes will not take my Danish credit card and does not leave my country to change since I live in Spain. So I can't enter my Spanish credit card because it won't let me change the country before giving another card... I don't know what to do?

  I recently moved to Spain, but I'm not allowed to type in my Spanish credit card because it won't let me change the country. It keeps telling me that I have to put in a card that works. But as soon as I put in my Danish credit card, it will not accept it? I have to money to iTunes, then, what is the problem?

  What happens when you try to change your country on your account, you follow these instructions: change your iTunes Store country or region - Apple Support ? While in Spain, you can only use the Spanish store, and you can use a card issued by a Spanish bank (and who is registered in the same name and address you put on your account)

• Mac Pro 2014 Retina screen shows lightning under empty battery but won't turn on

  Screen shows lightning under empty battery, but won't turn on. I had plugged it with two adapters to support different (long and short) that accompanies the retina macbook 17 inches. Ive left plugged in for 24 hours and still will not light. I have tried reseting everything I saw on the forum other messages such as pressing shift-control-alt-power - release and then pressing button works / stop and nothing. Sometimes just showing the Red/low battery with Flash below the middle of the screen, but it will not activate. I have all my work on this computer and need to have on it.

  The green light on the magnetic charge cable is not, however, this has only worked from time to time and then for a while so I was not worried about it. Any advice?

  You have to go to an Apple Store or an authorized Service provider. The fact and take up virtually even with different Chargers, the indicator light on the MagSafe does not light up and the display on the screen of the cries of hardware problems. And these sealed Macs really are repairable no-no.

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• iPhone 6 has ran out of battery juice, but won't turn on after connecting the power cable.

  Hello.

  I have an iPhone SIMless 6 (iOS v9.3.2) who missed the battery nothing to juice and turn off the power. I plugged the white USB power cable to a Windows laptop, but nothing happened. No power on, sounds, etc. I even tried another power cable and the source (power supply AC adapter and cable for the iPad). I don't even know if it is supported or not.

  Thank you in advance.

  If it is disabled on its own because of lack of power, it will take some time before he can return to the top.

  Plug it in and leave there for at least 10 to 15 minutes.

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• Problem turning on the Satellite Pro S500 without battery

  Hello!

  I have the following situation with my Satellite Pro S500-115:

  The battery seems to be faulty now (it loads more and Win 7 Pro told me to replace it).
  When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  But even if I remove the battery and the laptop connected to the DC IN, when I press the turn on button have nothing happens!

  If the laptop should not be able to operate in such circumstances, which is only connected to the electric network and with the connected battery off? I have to set in order to operate like this?

  Thanks in advance!

  > The battery seems to be broken now (it loads more and Win 7 Pro told me to replace it).
  > When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  My old laptop battery is dead too much 6 years It's possible to use the laptop in the dough mode for just two minutes after the battery is empty, but I use the notebook with the AC adapter connected and that is why I don't need to replace the battery.

  > Shouldn't the laptop be able to operate in such circumstances, that is only connected to the electric network and with the battery connected off? I have to set in order to operate like this?

  Usually the laptop should be able to turn on and operate without battery connected.
  My laptop works fine with an adapter connected only. So what to say maybe the ESF is also affected, but it's just a suggestion

  But you must check if the BIOS is in place to this day... sometimes a BIOS update could solve some problems of power and battery.

• MacBook Pro won't feed - need to disconnect/reconnect the battery.

  I have a 'early 2011' MacBook Pro 17 "which does not illuminate when the power switch is pressed.    He worked normally in the last time it was used.

  I'm a PC I / specialist t so I did some fault finding.  Here are the results and measures, I tried:

  1. Power button and no indication button has been pressed.
  2. Button on the side and he said fully charged battery.
  3. Adapter a/c and LED power connector attached LED lights up in green as it is supported.
  4. You press the power button - still no indication of any attempt to power on.
  5. Let Reset SMC pressing SHIFT, control, Option, and power switch.  All released.   You press the power button - still no indication of any attempt to power on.
  6. Power button which is held down for 15 seconds, released, then no hurry once - no change.
  7. Disconnected a/c power.
  8. Removed the back cover.
  9. Battery disconnected from the system board connector.
  10. Connected a/c adapter and power button pressed - no change.
  11. Disconnected the a/c adapter.
  12. Back in the connected battery system board connector.
  13. Joint a/c adapter and the system performed a reset, then IPL upward and ran normally.
  14. System "Shut down" and then press the power button - would not be back.
  15. Removed the a/c adapter and pressed the power button - still wouldn't back off.
  16. Disconnected a/c adapter, disconnected the battery, battery reconnected to the system board.  Power button - will not turn on.
  17. Repeat the procedure which worked previously - a/c offline, disconnected battery system board, connected a/c, press button power (no signs of activity), disconnected a/c, battery reconnected to the governing body of the system, reconnected a/c and it reset and power!
  18. Let system and then "reset" (instead of closing) - it restarts correctly.
  19. Shut down the system and then I tried to power - will not turn on.
  20. Bottom line: it seems that the procedure which will get the system starts, after it is closed: disconnected a/c, disconnecting the battery system board, connected a/c, press power button (no signs of activity), disconnected a/c, reconnected battery to the system board, reconnected a/c and it resets and starts.

  OK, so you MacBook Pro experts out there... what seems to be the problem and what measures would you recommend I take?

  THX,

  Jeff

  Hi Jeffrey,.

  Welcome to Apple Support communities.

  Looks like you did some troubleshooting while trying to solve the problem with your MacBook Pro turns is not on. The article below provides some additional troubleshooting steps that should help you further isolate and resolve service installation or question.

  If your Mac will not turn on - Apple Support

  See you soon.

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)