SAMSUNG SSD very slow external T1 to El captain

Similar Questions

• Samsung SSD500 on very slow iMac

  10.11.4 iMac

  I have the last 5K 27 "iMac with a Fusion drive. Blackmagic Disk Speed Test shows > 300 MB/sec in writing and > 800 MB / sec in reading.

  I also have a Samsung SSD EVO 850 500 GB which is connected to the iMac via USB. Blackmagic shows that around 40 MB read/write.

  I have the impression that USB 3.0 supports the higher transfer rate. So what could be the reason for the slow speed?

  Thank you.

  a fusion drive is just a combination small ssd as a hidden drive and a standard hard drive at low rpm.

  on the USB connection for the external USB samung, USB slowing the SSD because its old data transfer protocol, is the reason why what USB 3.1 is being such a jerk.  It has the ability to not get stuck on the transfer of files as a standard usb port.  Now if the SSD was hooked by the thunderbolt port you would see an amount of data more fast transfer rates.

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Toshiba 320 GB external HARD drive make my very slow computer

  Hello.

  I bought this product a few weeks ago now, and every time I use it, it makes my computer go tp so slow to the point where I can't actually do something on this subject, due to the fact that everything becomes inadmissible. Also, the rate at which I transfer files to it is also very slow. Any ideas why and what I can do to speed things up a bit?

  Thank you.

  Hello

  You suggested that the laptop becomes slowly during the use of the external HARD drive.
  I guess that transfer you a data from the HARD drive internal to the external USB HDD.
  I think that it s not very rare, that the laptop runs slowly during the transmission of the data.
  It depands on the program that runs in the context of the operating system.

  I put t know which interface you use USB2 or USB only, but data transfer depends on the interface.

• I bought the latest Samsung computer some three weeks ago. My laptop is very slow when I go on the internet but other computers are fine.

  Hello

  I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.

  Thank you

  original title: network connection

  Hello Pierre,.

  I suggest that you look at this article from Microsoft that can help solve a slow internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

• I found mrtstub.exe on an external drive and the computer is very slow.

  Is the "mrtstub.exe" a virus since I found it on an external drive (in fact, it's on 2 different external drives)?  I didn't get any warnings of Norton scan or Microsoft analysis, but the computer is very slow and sometimes hang up when I try to turn it off.

  mrstub.exe is part of the Microsoft Malicious Software Removal Tool.

  See Question 21 in the FAQ article: http://support.microsoft.com/kb/890830

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• Time of very slow start with SSD

  Hello

  I spent the last few days the net trying to find a solution to the boot of win7 very slow but have led to nothing so far trawling.
  Im running Win7 Pro in bootcamp on a Macbook Pro with an SSD and 16 GB of RAM, but don't get a time horribly slow start, including a screen black (with usable mouse) for a long time before the watch office. I am not able to do a reinstall but would like to get the issue resolved if possible.

  So far, I checked the event viewer to see there are problems and I don't see anything significant that the mere fact that each entry includes an 'Error' level, but I don't see what this error. I also used the process monitor to see what takes so long and there are a couple of processes which are time consuming and show a result 'Cancelled', one being svchost.exe 110secs (path: ...system32\drivers\etc) and the other 23secs Explorer.exe (path: ...appdata\roaming\microsoft\systemcertificates\my)

  I should mention that I'm very new to this kind of troubleshooting but would appreciate any help I can get!

  Thank you!

  The problem is that windows has been hanged in trying to restore network connections. Problem solved!

• Very slow SSD OCZ Vertex 3 Pavilion MSI MS-7184 problem

  Hi guys, hat

  I ve becomes a gift from a friend in the form of a Pavilion Desktop PC.

  The first problem is that I don't really know the type of flag of it.

  What is certain, is that it is equipped with a

  • Card mother MSI MS-7184
  • 2 GB OF RAM
  • Radeon HD 6570 chart and it has the
  • BIOS version 3.48
  • HP P/N: 5188-3246

  This is my second (big) problem with it:

  I have buyed an OCZ Vertex 3 SSD, hoping I am going to upgrade and increase my speed to WIN 7 Ultimate. Not my day... it's so slooooow. I tried bothways, that is, copy of the system partition on the new SSD and new installation WIN7 Ultimate on the SSD drive.

  I searched on the net on SSD include slow questions and the only things I found were that I have to activate the option to access HDD AHCI in the BIOS, option that I have not in my BIOS.

  All help aprecciated!

  Thank you.

  Hello

  Please report the number of HP for the PC product.

  Do you know what level of firmware your Vertex 3 is running?   Firmware version 2.22 is the last.  If your firmware is down 2.06, then you need to upgrade gradually.  I would not be to update the firmware if you decide to return the SSD drive. See my information below.

  I think that the card mother MSI has only SATA I, which is very slow for a VERTEX 3 allowing to operate at full capacity.  Frankly, I'm surprised that the VERTEX 3 works even on a SATA what should I wear as much SATA III SSD will not work on a SATA I port.  Review this OCZ VERTEX 3 document.

  You can see if you can return and exchange for another SSD that is backward compatible with SATA I.  Maybe the Vertex 2 or the agility-2 would be better for your needs.

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Still slow after Samsung SSD Pro 850

  I recently installed Samsung SSD 850 pro on my mbp 2012. There is no significant difference in its speed before and after. Application of test of speed magic Black Watch reading and writing speeds both somewhere between 40 - 60 MB/s. If disappointing! I'm not a tech guy but there might be people out there who have experienced this problem and have regained hope. If you know a solution please share.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Slow down the Evo 850 Samsung SSD

  Recently, I had a new SSD Samsung 850 EVO and installed on my macbook pro 2009. Using OSX El Capitan.

  But the reading and writing speeds I get are:

  Address: 209 MB/s

  Read: 264 MB/s

  and I should get about 450 MB for read and write at least. I went through to change the start-up as well as trimming startup disk, but did not help much.

  No idea how I can fix this problem? Thank you.

  Mbps 2009 have SATA2 connectivity.  You will not be able to experience the full capacity of the Samsung SSD.  You would need a MBP 2011 or newer to realize the full potential of this SSD. (This is when SATA3 connectivity was introduced).

  Ciao.

• MacBookAir suddenly very slow

  Hello

  for three years, I never had any problem with my Mac. Now, all of a sudden, from one moment to the other, it runs very slowly. Also, I have to force every time you start the Mac with pressing the button for a few seconds. When closing the laptop and opening it, it locks again as well (only the screen black, start must be forced).

  First thing I noticed was that kernel_task uses up to 400% of the RAM. I tried to find the problem myself, read about kernel_task, and did the following things (without success):

  -Updated to the latest version of El Capitan

  -Reset NVRAM and SMC

  -hardware running apple diagnostics test (Code: ADP000 find anything)

  -removal of protected system /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC _PlatformPlugin.kext/Contents/Resources to another folder, files and then reboot

  -make an EtreCheck.

  Can someone help me? Especially to interpret the diagnosis of EtreCheck?

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-08-08 15:04:23

  Download EtreCheck from https://etrecheck.com

  Time 06:37

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  All of a sudden, MacBookAir runs very very slow. Everything takes forever.

  Duty to force each start by pressing the button for 7 seconds.

  kernel_task use ±300% RAM all the time.

  No fan noise, not a spillage. MacBookAir has warm as usual (not at all).

  Reset NVRAM and SMC memory did not help.

  Test hardware said no material error (Code: ADP000).

  Hardware Information: ⓘ

  MacBook Air (13 inch, mid 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir6, 2

  1 1.3 GHz Intel Core i5 CPU: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 522

  Video information: ⓘ

  Intel HD 5000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour

  Disc information: ⓘ

  SM0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: Go 120,10 (17.04 GB free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  /Applications/TunnelBlick.app

  [no charge] net.tunnelblick.tap (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]

  [no charge] net.tunnelblick.tun (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 167 tasks Apple

  [operation] 66 tasks Apple

  Launch system demons: ⓘ

  [loaded] 46 tasks Apple

  [loading] 160 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-29) [Support]

  com.Apple.Installer.osmessagetracing.plist [loading]

  [loading] com.flexera.ia.helper.plist (2016-05-09) [Support]

  [loading] com.google.keystone.daemon.plist (2016-07-12) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  [loading] net.tunnelblick.tunnelblick.tunnelblickd.plist (2016-05-09) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2016-06-07) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2016-01-18) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-17) [Support]

  [loading] com.nchsoftware.switch.schedule.LikeSurvey.plist (2015-06-15) [Support]

  [loading] net.tunnelblick.tunnelblick.LaunchAtLogin.plist (2015-01-08) [Support]

  Other applications: ⓘ

  [loading] 410 tasks Apple

  [operation] 163 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-09)

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]

  EPPEX plugin: 4.1.0.0 (2011-07-27) [Support]

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-09)

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-05) [Support]

  Unity Web Player: UnityPlayer version 4.6.5f1 - SDK 10.6 (2015-05-07) [Support]

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-20)

  Facebook - Sonny Fazio - http://sonstermedia.com cleaner (2013-08-30)

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-07-24)

  RSS-Eradicator - Anton Osika - http://antonosika.github.io/newsfeed-eradicator/ (2016-06-09)

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-04-06)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-29) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  36% safari

  com.apple.WebKit.WebContent (3) 35%

  32% WindowServer

  22% mds_stores

  12% kernel_task

  Top of page process of memory: ⓘ

  Safari of 700 MB

  627 MB com.apple.WebKit.WebContent (3)

  Kernel_task 495 MB

  Mdworker (13) 201 MB

  Mds_stores 147 MB

  Virtual memory information: ⓘ

  206 MB free RAM

  used 3.80 GB RAM (801 MB cache)

  Used Swap 0 B

  Diagnostic information: ⓘ

  8 August 2016, 14:44:22 self-test - spent

  August 8, 2016, 13:58:15 /Library/Logs/DiagnosticReports/Safari_2016-08-08-135815_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  Thank you very much!

  KlausKandinsky

  you have 4 GB of RAM that can be demanding on the system regardless of suggestion of apples El Cap with run with 2; It will be, but do not expect to use the computer for a large part to start the system.

  also you run bit torrent, any software you get this service is suspect.

  Stop

  Disconnect all external devices

  start in safe mode

  https://support.Apple.com/en-us/HT201262

  test the system and runs better restart normally.

• My macbook pro mid-2012 is very slow. Do I need a new battery?

  Hello world

  Support on this community has helped me tremendously before so I thought I'd post again about a new problem.

  I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.

  After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?

  Here is my log of Etrecheck:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-07 02:57:40

  Download EtreCheck from https://etrecheck.com

  Time 01:38

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 893

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - number: 20

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 162 tasks Apple

  [operation] 68 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 163 tasks Apple

  [operation] 81 tasks Apple

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.bombich.ccchelper.plist (2015-11-30) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]

  [loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]

  [loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]

  [loading] org.cindori.TEAuth.plist (2015-12-03) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  PopClip application (/ Applications/PopClip.app)

  BetterSnapTool application (/ Applications/BetterSnapTool.app)

  Alfred 2 Application (/ Applications/Alfred 2.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Decision on application (/ Applications/Hear.app)

  Fan of Macs control application (/ Applications/Mac Fan Control.app)

  Hocus Focus application (/ Applications/Hocus Focus.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.crystalidea.MacsFanControl.60192

  [ongoing] com.etresoft.EtreCheck.207712

  [ongoing] com.globaldelight.BoomDaemon

  [ongoing] com.google.Chrome.163232

  [ongoing] com.hegenberg.BetterSnapTool.49632

  [ongoing] com.naotaka.ClipMenu.52192

  [ongoing] com.pilotmoon.popclip.291872

  [operation] com.runningwithcrayons.Alfred - 2.166432

  [ongoing] com.uglyapps.HocusFocus.264992

  [ongoing] org.herf.Flux.119072

  [loading] 412 tasks Apple

  [operation] 173 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]

  GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]

  Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-17)

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of

  User Plug-ins internet: ⓘ

  samesurf_screenshare_32: Unknown (2014-08-10)

  Safari extensions: ⓘ

  1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)

  ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)

  Audio Plug-ins: ⓘ

  Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  FUSE for OS X (OSXFUSE) (2015-10-25) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Destinations:

  Seagate 3TO [Local]

  Total size: TB 3.00

  Total number of backups: 4

  An older backup: 2014-12-12, 14:35

  Last backup: 2015-11-23, 08:35

  Size of backup drive: Excellent

  Size of backup 3.00 TB > (disk size 0 B X 3)

  Top of page process CPU: ⓘ

  67% Google Chrome Helper (6)

  37% Google Chrome

  6% kernel_task

  6% WindowServer

  2% PopClip

  Top of page process of memory: ⓘ

  770 MB Google Chrome Helper (6)

  Kernel_task 747 MB

  Chrome Google 188 MB

  Mdworker (9) 172 MB

  Mds_stores 164 MB

  Virtual memory information: ⓘ

  4.25 GB free RAM

  used 3.75 GB RAM (1.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 June 2016, 02:50:29 self-test - spent

  Hello. Try restarting your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

  Try resetting the system management controller: https://support.apple.com/en-us/HT201295

  I also suggest upgrading your RAM.

  I hope this helps!

• SAMSUNG SSD 850evo cannot be read on the disk utility

  My macbook pro 13 "mid-2012 has been very slow (20-minute boot) for the past month, so I quickly looked for a cure and thought I have a failing hard drive.

  I bought a Samsung 850 Evo 250 gb to replace the failed drive. Following the useful tutorials on youtube, I managed to install the ssd in my macbook pro. However, when I use the recovery of internet to install OS X on the ssd, ssd seem does not appear is not in the list of drives available in disk utility.

  Can someone help me why it does not appear in the disk utility?

  Get out the SSD drive, install it in an enclosure, connect it to the MBP via USB.  Install the original HARD disk and start the MBP.  Open disk utility and make sure that the SSD is displayed.  If so, you can format it and clone the content for the SSD from the internal HARD drive, if you wish.

  However, when you install the SSD drive and if it does not start the MBP, indicating that internal SATA cable needs to be replaced.

  If the SSD does not appear in the disk utility when it is connected to the outside, then that indicates that the SSD is defective.

  Ciao.