Device CD/DVR

Similar Questions

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Qosmio G30 problem composite S-video

  Dear Sirs,

  I can t of PAL video capture using the capture win DVD creator section.
  I even tried to change the settings from NTSC to PAL, but he knows nothing.

  Please advice.

  Hello

  The G30 supports s-video IN port on the right side for laptop.
  You must use an s-video cable to connect the two devices.

  After having connected the two devices Win DVR starts to pick up the signal.

  If that doesn't work not in your case the problem could be related to in-to-composite S-video adapter.

• can't get the drivers for the cd/dvr device does not read or write

  original title: can not get the drivers for the cd/dvr device read do not or writeing

  How do car keys DVD for read or write on vista premium.  the drive has failed. ?

  Try to run planned it from this link:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Equium P200D PSPBNE: Device Manager does not display the DVD - RW DVR-K17A ATA DVD / CD

  Hello experts out there I need urgent help!

  My Equium P200D all of a sudden she decided to show the CD/DVD drive in device as Manager no longer works due to a corrupted driver?

  I am running Vista Home and despite the removal of the drive and trying to update the driver, nothing seems to work can anyone help, I came to a point of throwing out the window.

  Concerning
  Stephen

  Hi dude

  This problem is known to me it happened to me also
  The problem is that you register Windows!

  A registry entry is corrupted and this is why the CD/DVD-ROM does not like I should.

  So what to do.
  First remove the driver from the Device Manager. Simply remove it.
  Then access the registry and and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

  Check it out

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Pioneer dvd rw dvr - k16 ata device.

  missing or damaged driver code 39.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mybugatti,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. you have any third-party DVD burning software installed on the computer?

  Method 1

  See the Microsoft article and run the fixit tool available below.

  If the fixit tool does not help, then try the manual steps, mentioned in the article below

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2

  If the previous step fails, then I suggest that you update thefirmware of the drive and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DirecTV DVR not seeing internet via router TC

  I installed a modem Arris SB6183 on Comcast xfinity network.  The modem is turned on and connected to the network, xfinity without problem.  All my other devices connected to the TC and could see the internet without problem.  (Though, as I write this I realize that they were all apple devices.)  However my Directv DVR (HR44-500) did not see the internet via the wireless or ethernet cable.  My TC is a 3 TB A1470.  The installer has been in DHCP + NAT.  I also tried to give Directv a (local) fixed IP which address found DVR, but still couldn't find the internet.  When I plugged the DVR directly to the SB6183, without going through the TC, he saw the internet seems to indicate a problem of TC.

  After a few days of futile efforts, I have reconnected the router xfinity and replace the TC in Bridge mode.  Everything is working now and the DVR sees the internet, but I'm still pay Comcast 10 $par month to rent their modem.

  Does anyone else have this problem?

  You need to clarify a few things.

  I would expect questions for Internet access to the DVR by the TC without doing manual port forwarding. The DVR itself must be connected to the internet as long as you have the correct values for IP etc. Although I suspect that ipv6 might complicate the situation.

  If the DVR awaits UPNP router compatible... the TC is a failure. Apple is not compatible UPNP, adopting instead their own port open NAT - PMP protocol which is limited to most of the time the Apple products.

  To get out, you need to return to the configuration without your xfinitiy router... and give us a stack of screenshot... To see the complete configuration of the RECORDER and the TC... screenshots are the best way to do it.

  DNS, in particular, can be a problem... so make sure you use Google public DNS on the DVR and see if that helps.

  Any other suggestions we really need to see all your settings...

  Some screenshots of a working Mac or iPad would also show the configuration of a unit of work... rather than the DVR has failed.

• In Device Manager it says code 10 - this device cannot start (read message)

  In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
  Thank you

  First of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.

  Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))

  Greetings

• Satellite A110 - Pioneer DVD - RW DVR-K16A is broken

  Hello I have a Satellite A110 and my DVD is broken.
  HY gives a problem with my station.

  It is said that the currency program not load in memory.
  It is possible that the pilot program is damage?

  I have a Pioneer DVD - RW DVR-K16A.
  But I did not now what to do, can someone help me?
  Marco GR

  Hello

  First of all, you should check in Device Manager if the CD/DVD drive can be recognized correctly. If there is no yellow exclamation, then the software (driver) does not run correctly!

  In such cases, it s advisable to remove the ODD (CD/DVD drive) Device Manager and restart the laptop. After restarting again the operating system should recognize and must initialize the disk again.

  Please check first!
  Best regards

• Sam L20-183: Pioneer DVD - RW DVR-K16S cannot read DVD

  Hi all!

  I have the Satellite L20-183 with Pioneer DVD - RW DVR-K16S player. This is a new computer, I bought it a week ago. The problem is very strange, after several days of use of the laptop drive does not read or write DVD! The process of reading or writing with the CD is excellent. Who is wrong? I didn't change the firmware or something like that. I don't really know what to do. I can't reinstall the system since the Toshiba Recovery dics's on DVD and it won't start...

  Help, please

  email: [email protected]

  Artur

  Hi Artur

  Try to remove the drive from Device Manager and reboot your device. After restarting the OS should reinstall the drive. Then try to play the DVD.
  Well, I also read a few topics in the forum a similar car problems and it seems that you are driving can has a calibration problem. In this case, you should replace the disk. I think that it isn't a reason to be angry. Your device is under warranty and all replacements must be done for free.

• ODD on my Satellite L550-11J is damaged - looking for new suitable device

  Hello

  device dvr from my toshiba satellite L550-11J (purchased in 2009) with windows vista 64 seems to be broken. It is a "pioneer dvd - rw dvrtd09a. It does not show in windows, not in the Solution Explorer, not in Device Manager (if cela is the English name of it, I don't know, I'm German speaking). It shows even in the bios or boot device, so I think that this is not a software problem, but the material is broken.
  What new dvr device is suitable for my laptop? I can't find the same device dvr on amazon or elsewhere to buy, so I guess I need someone else who can help suits.please.

  Best wishes

  no-idea

  Go to http://www.toshiba.eu/innovation/download_manuals.jsp and download the manuals s user for your laptop model. On page 9, you can find a list of all compatible discs optical readers for your laptop model.

  If you do not find t exact post (PSLxxx) part of your laptop model number, and I can do it for you.

• DVD - RW DVR-K16S can no longer write to CD.

  Please I'm looking for a solution for my dvd rom DVD - RW DVR-K16S who has stoped writing on CD. When I started writing something on a CD, a message appears saying ERROR WRITE. Now I'm confused. I don't know if it's the cd rom that is damaged or there is a software problem.

  I tried a burn with a different software. All proved futile, the drive can read DVDs and CDs, the only problem is burning.

  Remove the device from Device Manager, then restart the unit. After this check in the Device Manager, and if everything is ok check disk properties and activate the CD writing.

  Test again.

• BIOS does not detect the CD/DVD on Satellite A205-S4639 device

  Hello!

  My laptop Toshiba works not very well, he has the following problem:

  When I enter the BIOS program (by pressing F2) main 'BIOS hand', the CD/DVD device does not appear in the module.
  Click on the link of the image: [main BIOS | http://softvaina.googlepages.com/BIOS.Main.jpg]

  Then, I go to the BIOS boot module and the CD/DVD device appears in the list of boot devices, che the image link: [BIOS Boot | http://softvaina.googlepages.com/BIOS.Boot.jpg |] BIOS Boot]

  Finally, I try to boot from the CD/DVD-ROM and it works (check this box [Image | http://softvaina.googlepages.com/BootMenu.jpg |]) Boot menu]).

  In the environment of OS (Ubuntu and Windows XP), the CD/DVD device does not appear, and it does not work.
  The laptop features:

  Make/model: TOSHIBA Satellite A205-S4639
  T.O.D.: 160 + 120 GB
  RAM: 3 GB DDR2
  Video: NVIDIA GeForce Go 7300
  Optical drive: PIONEER DVD - RW DVR-K17LF

  Note: I've updated the BIOS, but the problem persists.

  What is going on?

  > Then, I go to the BIOS start module and the CD/DVD device appears in the boot device list, click the link of the image: BIOS Boot
  It is a boot menu and it always seems to know whether or not the CD/DVD or HARD disk drive has been inserted!

  In my opinion, your CD/DVD drive is faulty or there is no link with the portable CD/DVD player.

  A mobile technician must verify and if necessary should replace