SAN upgrade passes to 10 Gbit

Similar Questions

• Live iSCSI SAN upgrade production network (Dell MD3000i and PowerConnect & ESXi 4)

  Hi all

  For the moment, I have a direct connection to my Dell MD3000i iSCSI SAN in ESXi 4 2 x host with no switch between the two, all of the virtual machine is within the SAN and running on both hosts.

  If I want to put a switch between the two and add one more iSCSI SAN so that the two SAN can be accessed / shared with the 3 ESXi 4 guests total, how should I approach the issue?

  any idea or guideline would be greatly appreciated.

  What I have to plan the time or can I change the old IP on the existing SAN iSCSI manually cable one by one without damage/alter the existing operation of the virtual machine on SAN? or I have to stop the virtual machine and then terminate the connection manually iSCSI session and then restart the host SAN?

  Thank you

  AWT

  Standard installation on the MD3000i is for a port iSCSI on each controller on a subnet and one on each controller to be on another.

  There have been people working successfully on a subnet, reported problems too.   I wish we were longer on our Vsphere upgrade, I'm not at a point but where I test things like Vmotion.

• InDesign CS5.5 El Capitan action items do not match the document rule

  It's the strangest thing, and I've dealt with him, but finally had had enough. I believe that this message upgrade passes began to El Capitan. Items as boxes have no real measures appear in the InfoBar at the top of the screen. I should be able to enter the area of measurement x on the position of an element to align exactly with the rule. He is totally off! For example, I have an elements clearly aligned with 0 on the x axis, but the measure for x = 2! I've been positioning using smart guides, but it is crazy that I can't type a number and have the element to align correctly. Any help would be great! (I clicked the sovereign so that it appears in the corner)

  HI - this sounds frustrating!

  Have you tried to reset your InDesign preferences?

  Troubleshooting 101: Replace or 'trash' to your InDesign preferences

• Scsi.ConflictRetries

  I'm running on more than one host ESX 3.5 U5 and connected to a San for 3Par, HP EVA 3000 3Par is instruct change me my default value 80, maximum of 200 Scsi.ConflictRetries (referenced in this article VM: http://kb.vmware.com/kb/1020366 ) until my OS SAN upgrade is complete next week.

  I am trying to determine if there are negative side effects to this change. How this will affect my HP SAN?

  Thanks in advance for an overview of this.

  Salvation of the brain,

  Increase Scsi.ConflictRetries will not have the negative effects of your San.

  The option is used to set the number of attempts THAT HBA is to acquire the lock on LUN for every write operation done to the SCSI.

  Please consider giving points if this information is useful.

• Update Firmware on vSphere MD3000i

  Hello

  We currently have several without MD3000i which must obtain an updated firmware updated (RAID controller and physical disk firmware) for the latest versions (07352261 for the RAID controller).  Those without are connected to the PowerEdge 2950 runs the last environment vSphere.  I did a little research and from what I understand, the key is really:

  -Back up all your data.

  -Stop the vSphere physical servers.

  -Use the crossgeneration utility provided to upgrade the San.

  Does anyone have any experience or advice related to the MD3000i San upgrade? Advice would be appreciated.  Thanks in advance.

  Gene

  It depends on if you want to continue your virtual machines to be connected, so plan accordingly, you will have a good upgrade without interruption of service, I've done was 15 x 400 GB MD3000i firmware upgrade to version xx 7. but a cheap shared storage of NFS/iSCSI using OpenFiler to promote and use Storage VMotion to move VMS as intermediate destination.  Once the upgrade complete, migrate their return and delete or recycle your Openfiler or keep it low key development servers.  You can move to a local disk if you want to just for temporary, but can not do any VMotion/HA if.  You can use the demo as network SANmelody or left virtual storage to improve performance and reason for portability.  Otherwise, if you drive to power that run them just a quick upgrade with scheduled downtime should be fine.  Good luck.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• I wonder if I can pass my carrier unlocked iphone 4 iOS to iOS 7 8? or it will lock again after the upgrade?

  I wonder if I can pass my carrier unlocked iphone 4 iOS to iOS 7 8? or it will lock again after the upgrade?

  1 n ° iPhone 4S can only be directly updated to 9.3.3.

  2. update of the iOS on an iPhone that was originally sold as unlocked or is released by the carrier won't it relock.

  (143770)

• Following the upgrade to 34.0.5, I can access is no longer our SAN, airco, vSphere customers Web web pages, etc. How can I fix this?

  After upgrade to 34.05, can no longer access the web pages of the SAN, the air conditioning system, vSphere Client Web management interface, etc. All still work in Chrome.

  The air conditioning system gives an error:

     Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
     Advanced info: ssl_error_no_cypher_overlap
  

  The management interface SAN and vSphere customers Web display an empty page. Not sure if they have problems due to SSLv3.

  I understand that you want to be careful, but I seriously doubt that I have to deal with an attack of our SAN. Please, at least give us an option for you connect without worrying.

  Unfortunately, it is not possible so set this preference selectively - with preferences of internal firefox mentioned previously, you can only enable or disable the low globally.

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• Cannot install/upgrade to SAN HQ v2.5 - unexpected error.

  

  I get this error after I tried the upgrade and do a fresh install of SAN HQ v2.5 on my server HQ SAN; but have no problem installing SAN HQ v2.2 installation seems to work very well, and when I try to open the SAN HQ client I get the above error.

  I just built a new server and installed the new v2.5 HQ SAN server, and as soon as it finished installing, I get the same error.

  Server 2008 R2 running.

  Any help will be greatly appreciated.

  Crowlaw, you can check if your systems are configured for FIPS compliance?  To check this, the simplest method is to look at this registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\FipsAlgorithmPolicy\Enabled

  If this entry is set to 1, then I would recommend that you try to temporarily set it to 0 to see if this allows you to start the Client SANHQ.

• Try to upgrade Windows 7 Edition Home Premium to professional, but I can't access the site to upgrade. How to pass?

  original title: Windows7 Professional Upgrade

  I just bought a new computer running Windows 7 Edition Home Premium with an upgrade to windows 7 Pro. I have the PIN # for the upgrade, but I can't get the site to come www.windows7.com/get key. How to pass?

  If your PIN does not work, try the following:
  1. check that the PIN has been entered correctly. PIN code is not case sensitive and is alpha-numeric.
  2. make sure that the PIN has not already been used to obtain a product key. A PIN can be used only once to get a product key. If the PIN has been used, you can connect to your account with your Windows Live ID (if you have it when the PIN has been entered) to access your product key or you can check your email for the confirmation e-mail, that you have received when the PIN has been consumed to access your product key.
  3 contact support if you have any questions: www.windows7.com/getkeysupport.

• Windows 8 Upgrade Wizard does not pass the payment

  Hi, I am looking to buy windows 8 the wizard upgrade and it won't pass the part payment, for example if I want to pay with a credit card, I fill in everything and when I click Next nothing happens, same thing if I try to use paypal, I have done everything to disable my antivirus to run it as an administrator , and nothing seems to work. Help, please!

  Hello

  Thanks for posting your question in the Microsoft Community Forums. If I understand you correctly, you have a problem with the upgrade to Windows 8. The upgrade of Windows 8 Wizard won't pay the Bill. Please let me know if this is not correct.

  
  I suggest you to contact technical support for Microsoft Store for assistance on this issue.
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us
   
  You can see the article about the issue of Paypal.
   
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/i-tried-to-buy-Windows-8-through-PayPal-but-never/643bade0-82a2-4F60-B25E-7619c0594df4
   
  
  Hope this information helps you.

• How can I register for the free flow of 3 months now that I passed just Oracle 12 c OCP Upgrade

  I just passed my exam 1z0-060 (hundreds and hundreds of hours studying).

  I tried signing for 3 months of free streams, but I must now be well do things.

  In CertView, I clicked on view Certification history.

  She had a button to select the stream type (I choose database).

  I then clicked the upgrade button.

  However, when I go to the section of water courses, I does NOT recognize the 3 free months.

  Help

  Contact the Support of Certification Oracle http://bit.ly/YpaA7i. They should be able to help.

  Kind regards
  Brandye Barrington

  Oracle Certification program

• just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  (I also update to the latest version of LR)

  Reach:

  Edit > preferences > Performance

  Disable the GPU acceleration.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Upgrading ESX when you are connected to the SAN

  Hello. At the time, it was considered preferable to unplug the host SAN during installation or upgrading ESX fram. Is this still the case with ESXi 5.5?

  Hello

  In fact, it is always best practice to disconnect from the SAN, but you could do it on the fly as well using the Manager to update if your upgrade to ESXi ESXI 5.1 to 5.5. I have seen many do

  without any problem. Just make sure that the hardware is compatible in HCL.

  Thank you
  Avinash

• SAN LUN must be disconnected to ESXi 4.1 U3 upgrade?

  Salvation;

  I was wondering if SAN LUN must be separated (registered) during the upgrade of U3 for an ESXi host.

  I did the upgrade on a new host that is not yet in production, and has any HBA inside.

  I just tried on a variety of prod in maintenance mode and it gets to a screen and it shows the LUNS sees it. (see the attached screenshot)

  I know that the local drive is the target, but I want to just make sure that nothing happens on the remote SAN LUNS if I proceed.

  Any info would be great, thanks.

  If I am mistaken, interactively fix/upgrade using the CD is only supported with ESXi 5.0 and newer. In doing so, with the ESXi 4.1 CD, will wipe the installation disc! A method of support for ESXi 4.1 update is for example the vihostupdate command-line utility to apply the patches provided in http://www.vmware.com/patchmgr/download.portal.

  André

  PS: Please consider joining screenshots in format rather than .rtf .jpg files.

  PS2: Issues displayed in communities VMTN (http://communities.vmware.com/community/) rather than in groups generally receive more attention.