Sansa View 8 GB and Windows Vista 64-bit

Similar Questions

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Package of added value and Windows Vista 64-bit on Satellite P200

  Hello, recently I changed Windows version of 32-bit to 64-bit. Everything works perfectly except PPV.

  When I try to install it, it produces an error message that says:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  I found in some old discussions that I should update my bios, so I downloaded most recent bios, and when I tried to update, the pop-up message that I already have this version.

  I did some research and I found some drivers for the 64-bit version - [link to driver | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selSho rtMod = null & language = 13 & selOS = 27 & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 61866 & DISO = 27 & driverLanguage = 13]
  and in the statement, he said that I should
  "It's only the driver of value added package for 64-bit computers. Installation instructions: 1. unzip the zip-> 2. Right-click on the "TVALZ_O.INI" file-> 3. After a right-click on the file, choose "Install" from the context menu. »
  But when I do that there is an error message that says that this INF file selected does not support this method of installation.
  I tried to install it in safe mode, but the error is the same.

  Maybe I should put these drivers in a specific location? If Yes, where?
  Who can I install everything first? VAP installation for 32 bit, then driver for 64-bit? Or maybe the other way around?

  If someone could write me a clear instruction how step by step, I would be really grateful.

  My system: Windows Vista 64-bit Ultimate with SP1
  My Notebook: P200 series

  Best regards, Paul of the Poland.

  Hmm, I wonder about this sentence
  > I've done some research and I found some drivers for the 64 bit version

  What is your laptop model number? Have you chosen the right Toshiba VAP for the right notebook series?

  If you have chosen the correct drivers (for the right notebook series) then try to copy the extracted files in the folder of Toshiba Value Package added to programs-> Toshiba-> Toshiba Value added Package.

  Then try to run the ini file as described on the page of the European driver Toshiba.

• I removed Windows Vista 32-bit and Windows Vista 64-bit installed, but when I enter the key it says the key is already in use. How can I fix it?

  I have Windows Vista Ultimate 32 and 64 bit edition

  I bought Windows Vista Ultimate 32 and 64 in a box in 2008, I installed the 32 edition because at the time I was told not all software will work with the edition 64 a month ago, I decided to windows 7 Ultimate Via Amazon purchase which proved be a copy of the counterfeit money and Amazon me has now repaid , so what I do, well I could buy another copy of windows 7 Ultimate or I could give the other Version of windows that came in the same box with a product key a go, so I removed and formatted the hard drive and reinstalled 64 bit version on my drive using the product key original that I used on the 32-bit Edition for four years and when I try to register the 64 bits edition, that is to say someone else using this product key, you will have to buy another key or a copy of windows 7. Well, I decided to wait until Windows 8 will be released, that's why I decided to try the Vista 64 - bit Edition?

  Or better yet, I might switch to a Mac OS x system?

  The answer is not to buy Windows 7 from a dealer on the market of Amazon.  Stick to Amazon itself.  Amazon Marketplace is as eBay and other auction sites and online delivery.  It is composed of persons whose practices sales are questionable.  You won't get counterfeit product from Amazon itself.

  You have to solve the problem with Vista 64-bit using phone activation.

  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx

  Or click Start and type ' slui.exe 4.

  Do not answer all prompts automatic until it asks you if you want to speak to an agent.

  If you continue to have problems with activation, run the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool

  Once downloaded, run the tool. Click on the button continue, after a short time, continue button will change to a copy button. Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Life in car and Windows Vista 64-bit

  So, to be clear, what I read that looks like my drive of life is not compatible with Vista?  Is it true that Palm is going?

  Thank you

  Roberta

  Hello Roberta and welcome on Palm forums.

  No Palm OS, including the LifeDrive device, is compatible with the 64-bit editions of Windows Vista or Windows XP.  This is due to the lack of a 64-bit USB driver that is required to perform a HotSync cable.  If your PC has Bluetooth, you can synchronize your LifeDrive via a Bluetooth wireless connection.  For more information on the use of Bluetooth, see this thread.

  Alan G

  Message is about: Treo 755 p (Sprint)

• Garena.Windows vista 64-bit, Death Adder (Razer)

  Hello, I have a Death Adder and Windows Vista 64-bit, by opening the War3con key Garena hots works not mouse, but works when I connect to my local network at home, so I think that a problem with the windows and Garen, some moderator can help me

  Excuse my English, ty

  Hello, nanrock37

  Please use the Forum for answers!

  The game is compatible with the 64 bit version of Windows Vista?
  Are you able to play games properly?
  If your mouse requires special software, you have the latest version?

  You can try the game in compatibility by clicking right on the application (or shortcut) mode, choose Properties, go to the Compatibility tab and choose your options running.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista 64-bit install of Officejet 7310... need help please.

  I need help to get this thing working... I have the HP officejet 7310 and windows vista 64 bit... It wont let me dl the program on the cause of the computer it says that I must be in administrator... then I am logged in as an administrator and still I can't dl it. I right clicked on the icon of the exe, and click on "Run as Administrator" and still get the same error... help!

  I've tried this so many different ways and looked everywhere and I can't get this to work.

  Sorry for the last post. Link does not seem to be parsed correctly. Try THIS link.

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Windows Vista 64-bit and button Support - Qosmio G30?

  Windows Vista 64-bit and Support Button?

  Hello buddy

  What do you expect now after writing this fabulous issue?
  Don't you think that someone will take you seriously?

  Just a tip: If you want to ask something to let people know what model of laptop you have exactly. All laptops are not supported for 64 bit Vista operating system.

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• i, m on windows vista 32-bit basic family and I m under IE 9. Windows Defender does not level

  i, m on windows vista 32-bit basic family and I m under IE 9. Windows Defender does not level

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon

• Im trying to install the Nvidia drivers for my new video card and its saying that my operating system (windows vista 64-bit) is not compatible, which means they are 32-bit drivers, it's fake.

  Im trying to install drivers for a Nvidia Geforce GTX 260 on my windows vista 64 bit computer. Every time I have try and start the download, it is said that my driver is not a 64-bit driver, which is false, and that my system is 64 bit, which is true. SO... after I click 'OK', it begins to download only to have another pop-up saying "Setup has detected that the system in use is not windows vista 64 bit" which it is. Basically its contradiction with himself. im confused.

  Im running windows vista 64-bit.

  I just upgraded to a Nvidia 9800GT, to a Nvidia GTX 260.

  In frustration, I deleted all the old drivers, but the new will not download.

  The first error says that the drivers are not 64-bit.

  The second error indicates the operating system is not 64-bit.

  Let the site nVidia Driver detect your video card. If it still does not work, contact nVidia for a solution... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Avira Antivir is compatible with Windows 7 and Windows Vista?

  Avira Antivir is compatible with Windows 7 and Windows Vista? I have ECS MOTHER card and 1 GB of DDR2 Ram, 160 Gb HDD.

  I have not tried on Windows 7 yet, but yes, it is certainly compatible with Vista. Steve Hebert - MVP Microsoft Internet Explorer

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner