Sansui HDTV with PC quick entry works after change of pixels.

Similar Questions

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• Satellite A200 - 1 H 2 with Vista does not work after restoring

  How-dee!

  I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
  Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

  After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

  So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
  "Windows cannot repair this computer automatically" and below:
  "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

  It's weird cos I have no device connected to my computer and it was during my recovery system.

  After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
  "Root cause found.
  --------------------------
  Failure so that the Setup program is underway"

  What should I do now? I don't have any bootable Windows Vista DVD.

  Please heeeeelp!

  PS. Sorry for my poor English :)

  That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
  However, maybe that something was wrong during the first attempt

  Try using the recovery again disk and try reinstalling this cell second time

  Good luck

• Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

  Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

  However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

  How can I reactivate fingerprint logon?

  Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

  The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)

• Problem with slots Usb not work after installing Windows 7

  Hi all

  I just had a guy fix my brand new computer, after that it was abandoned due to an accident than an anne 5. I told him that I wanted Windows 7 installed on the computer instead of 8. He did and got it all and running, no seven complaints only 1 usb slot works now and don't rest. Question is how can I solve this problem? I tried unistalling and reinstalled it a nothing still.

  Want HP dv7-7230us

  Product #: c2n66ua #aba

  Possible the AMD Chipset is required - includes the drivers for the USB 3.0 ports:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• EXE files created with aggregator does not work after installation of Windows update KB3132372

  outputs .exe created using Adobe aggregator only white screen after that the latest patch for Flash Player has been installed. One of our sites publishes several of these courses next week. They are working on a plan B, where they will release output .swf aggregated, but it's not ideal. No work around available?

  This is the second time that the Adobe developers make this mistake.

  There are 4 years, what a flash update made a black screen to all EXE Captivate files. At the time the patch is a patch to Captivate and republish all courses after the patch. At the time my company was in its infancy and had very few customers and has sold only a few products. Today, we delivered thousands of products to paying customers. If the fix is proving to be the same it would be our company cost very expensive and probably paralyze our business.

  It is unacceptable that a company such as Adobe provides an update to Flash without testing on their platforms. I'm not sure how many of you are in the same situation as us, but if you are please feel free to contact me.

  I would like to start sending my clients email complaints and claims directly to someone who cared about Adobe, but this only works if a person didn't care.

  THIS PROBLEM MUST BE RESOLVED AS SOON AS POSSIBLE AND NOT ONLY NOT DOING HALF A * JOB LIKE LAST TIME.

• W500 'dead' with new software, gps works after reinstalling older software

  The upgrade of the software gps-enabler on my 4062 (ericsson hspa) 2.50 let GPS 'dead' (not even respond to the dedicated com port). This 'upgrade' uninstall and go back to 2.4 return GPS.

  OS: Install Windows 7 Ultimate x 64, fresh with thinstalled thinkvantage sofware.

  Svein

  Resolved, see: http://forums.lenovo.com/t5/Windows-7-Discussion/W500-gps-problems/td-p/202620

• Internet does not work after changing graphics card.

  Hello

  I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case.

  after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetooth device) and I don't have a Wifi connection. I am currently connected to my internet via an Ethernet cable.

  Here are some screenshots of my problems:

  

  

  Please help me with this.

  The wifi card, if it's a minimap, as it is in the image, should have had two sons goes to the card wifi which were channelled through the case.  These were responsible for picking up the wifi signals to work.  Since the screenshot shows the weak or no signal, I suspect this is the question.

  

  As to describe the process of removing antennas, I couldn't find the following steps.

  Before you start: Remove the access panel, the collar, the higher optical drive and the upper bezel.

  1. Detach the antennas wireless the wireless LAN card.
  
  
  2. Cut the cable tie fixing connectors antenna for the front i/o cable harness.
  
  
  3. Pull the antenna cables without wire through the access hole in the upper part of the unit.
  
  
  4. Pick up each cable hooks fixing the top of the page of the PC.
  
  
  5. Detach the screws for each antenna.
  
  
  6. Pull the antennas of the unit off.

  In the end, it seems that the antennas are routed right under the top cover.

• Photosmart 6520 e all-in-one: airprint not working after change of router

  After an upgrade of the router, my connections are all very well with the wireless and printing succeddful to see the wireless configuration. Computer (acer) laptop is fine, but now I can't print from my mac airbook or the ipad or the iphone. 'no airprinters found' I noticed that the printer's Ip address is 192.168.1.5 and the gateway is 192.168.1.1.  I can see the printer option in the settings / wifi on the ipad and it IP poster 192.168.223.100. ???

  so far, tried the usual things;

  1 router reboot

  2 restart apple devices

  3 settings factory restore on the printer and reconfigurung using WPS successfully

  4 turn off, unplug and restart the printer.

  No joy. ePrint thanks to my address hpemail works but nothing else.

  Anyone got any bright ideas?

  I've sorted my own problem and I put this here for everyone in a similar situation with airprint questions. The problem for me was my new router from talk talk upgraded. Everything seems fine. Configures and implements and should work but if you have 2 routers following it will not airprint to devices apple;

  D - Link DSL 3680 (can restart as ready upgrade)

  DSL 3780 (MINE!) "Firmware update later this year.

  until such time as in this case, you could avoid 2 daus trying to restart, print, check the addresses Ip, etc like I did...

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• vCenter WebClient does not work after changing the field of vCenter Server

  Hi all

  I had to migrate my vCenter to a new domain. This migration is smooth without any problems. Everything works fine.

  Now, some of my colleagues need to use the web Client and I discovered, after to be authenticated successfully to the web server,

  I have an error message:

  Unable to connect to vCenter Inventory Service - _ https://vcenter._olddomainname: 10443

  Thus, even after reinstalling the Web server on my vCenterServer (version 5-update1) component, it always uses old domain information.

  I can't find where to change it.

  Hope you can help me with that.

  Thanks in advance,

  Frank

  Have you tried to run the command as shown in register.bat

  http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-9C65879E-7442-46E2-9A20-A858B2800D12.html?

• Workspace stop working after changing the IP?

  Hi, I installed 11.1 EPM using settings standard tomcat. I can connect to all the components installed via the installed after initial workspace (planning, EPMA, SS)
  
  I stop the server and then restarted in a network segment different (different IP address.)
  
  I started all the services correctly without problem.
  
  However, when I run the workspace, it only will authenticate "you must provide a valid user name and password... »
  
  I used admin and a fully stocked user, no luck
  
  I can connect to the EPMA thru 19091/awb via the account listed above 2.
  I can access shared Services using the account listed above 2.
  I can start connection through 55000/MCC and CMC using the account listed above 2
  
  I can't connect through the workspace
  
  Can someone tell me how to authenticate the work space? What are windows services should rely on. What config file controls the use of workspace hostname and port at the start of the agent and the webapplication.
  
  I ran the EMP validator and all services returned ok EXCEPT the workspace. Seems impossible to connect to the Shared Services with a Java.lang.exception java.net.connectexception: connection refused
  
  So it's either an IP or port config I messed up. What config file is responsible for this?
  
  
  Any help will be greatly appreciated.
  
  Published by: user10775568 on January 9, 2009 12:36 AM

  Hello

  It should automatically put in the host name if you entered that I know on the first versions of the system 9 workspace even if you put in a host name, that it would have in an ip address, but this has been resolved.

  When you first run the Setup program and it should show whether or not it includes the host name
  for example http://1.bp.blogspot.com/__2AaArK5lW8/SIOAYEy3gMI/AAAAAAAAABM/FnVhs38-_WA/s1600-h/welcome.png

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Touchpad does not work after changing from Vista to XP Satellite A210

  Hello world!

  I changed my Windows and now, something is wrong with the Touchpad. It works like a mouse (the cursor moves right and left buttons are also correct).

  Before with Vista, I had the button send, Wi - Fi connection, something else and its evolution, and more he had extra blue light. Now these buttons are not active and not etrxa of light.

  Satellite A210 laptop.

  I already tried all possible drivers, but perhaps you could advice me something else.

  Thanks in advance!

  Please try this one
  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-20070809133247.zip

  and give us your feedback if this driver can help or not
  THX