W500 'dead' with new software, gps works after reinstalling older software

Similar Questions

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• HP Officejet Pro L7590 problems with new software

  Hello

  I have a HP all-in-one OfficeJet Pro L7590.  I had to move the printer on another computer that is running Windows 7.

  When I install and try to print to the printer does not act as he did with the software that was on the old computer XP.

  What I mean is that the printer will not print double side which is a feature that I used a lot.

  I downloaded and reinstalled the software and downloaded used the HP print and Scan doctor.  When executing this I was told there was a driver conflict so I unplugged the usb cable and drivers have been removed and when I plugged it in new dirivers were installed.

  Always when I go to properties and select Quick economy and printing on two sides he spits a page then the printer acts as if it was out of paper, and then when I press OK on the printer it prints the second page on another sheet of paper.  Note: What is printed on the 1st page prints correctly and what is printed on the 2nd page works properly for printing on the other side, but it is not the other side, but a separate sheet of paper.

  Your help would be MOST APPRECIATED what!

  Note: I repeat that the software that worked under Windows XP has never had this problem.  This new version of the software running under Windows 7 has a problem.

  Hello

  Just to thank everyone who responded to my questions about the problem with printing 2 Facer on OfficeJet Pro L7590 by HP.  I did the following and it seems to have solved the problem of this printer DO NOT print on two sides of a sheet of paper.

  1 deleted all the computer printer software

  2 used the utility available on HP website washer to clean any persistent software that I couldn't find.

  3. set the printer back to factory defaults.

  4 use HP printer Installation Wizard to find and install the fix version of the software that sits on the HP website.

  Thanks again for those who repsonded and I hope the above helps anyone who might read this message.

• Satellite A200 - 1 H 2 with Vista does not work after restoring

  How-dee!

  I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
  Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

  After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

  So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
  "Windows cannot repair this computer automatically" and below:
  "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

  It's weird cos I have no device connected to my computer and it was during my recovery system.

  After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
  "Root cause found.
  --------------------------
  Failure so that the Setup program is underway"

  What should I do now? I don't have any bootable Windows Vista DVD.

  Please heeeeelp!

  PS. Sorry for my poor English :)

  That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
  However, maybe that something was wrong during the first attempt

  Try using the recovery again disk and try reinstalling this cell second time

  Good luck

• ProBook 4530 s sound does not work after reinstalling sound driver

  Hello

  Lately I noticed this weird sound while I was playing music or other sounds from my computer. It is difficult to explain what it sounds like but it was as if the distorted sound for one second every now and then, a little sound like a robot. I looked if I could solve this problem and found that reinstalling the audio driver should solve the problem. That's what I did, but after reinstalling and restarted my laptop it says "Nou Audio output device is installed" I made clear on the site of hp. For the moment, I have no sound. I tried to install an earlier version of the audio driver, but that no longer works. I'm sure that I have installed the correct drivers (I tried sp59291 and the sp57776 of earlier version).

  I don't know what version I have installed first.

  Additional information:

  -To install a new audio driver, I went to the Device Manager and uninstalled the current sound driver.

  -Manager At of devices under the IDT High Definition Audio CODEC there is a line called "Intel(r) Audio display.

  -In the Device Manager there is a yellow triangle with an exclamation to IDT High Definition Audio CODEC

  -J' have Windows 7 Home Premium 64 - bit installed, service pack 1

  I hope you can help me!

  Myxx

  Guess I have solved the problem, I uninstalled the audio driver, close my laptop computer and rebooted. It starts automatically install the correct driver. I hear that weird no sounds either!

• Libretto W100 Bios + some drivers do not work after reinstalling Win 7

  I bought the w100 and I love the thing to death.
  Had no problems with it until Saturday, to make a long story short, I reinstalled win7 on it, the wrench was found under the battery.

  Win7 installed ok, but I had a few problems with the software booklet *. Firstly the bios has been 'not supported', as was the PC health monitor.
  I finished installing anyway, and most importantly, it seems to work. A bit slower than before, I'm guessing because of the bios.

  It's the same material, nothing has been changed, even the same win7 (Home premium), so I wonder what I did wrong here.

  I tried to reinstall three times and no luck.

  Oh, and I just noticed that the "auto rotation" is not no longer works.

  If anyone has had similar problems, and you have a solution?

  * All booklet drivers have been downloaded here:
  http://at.computers.Toshiba-Europe.com/innovation/JSP/supportMyProduct.do?service=at (I used my series to find the correct drivers)

  Hello

  You have reinstalled Windows 7 on a normal Microsoft Windows disk?
  May I ask why you do not use the Toshiba recovery media?

  With respect to the rotation of the display, I started another thread that may be useful for you :)
  http://forums.computers.Toshiba-euro...ThreadId=57977

• Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

  Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

  However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

  How can I reactivate fingerprint logon?

  Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

  The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)

• Fingerprint Software will not work after reinstalling

  I've uninstalled and reinstalled the fingerprint, version 3.2.0.341 reader - 20/04/09.  When I try to register a fingerprint, I get the message "Fingerprint Registration: FPApp.exe - cannot locate component" saying "this application has failed to start because css_banner.dll is not found.  Reinstalling the application may fix this problem. »

  I have re-installed, choose the repair, but I still don't have the error.  However, I see css_banner.dll in \Program Files\Lenovo\Client Security Solution.

  How can I solve this problem?

  Update: I uninstalled the 3.2.0.341 version and installed the version 3.2.0.116.  I have the same problem.

  I solved the problem: I had to fix the Security Client Solution.

  I noticed that if I tried to open the Client Security Solution, I had a similar error on css_banner.dll is not present, message followed by a message CSSLauncher.exe has encountered an error and that it would be closing.  So I decided that since the css_banner.dll belongs to Client Security Solution, it was logical to try to reinstall or repair the application.  I downloaded version 8.2 of drivers and software, and it offered a choice of "repair".  After the repair, my request for fingerprint reader worked.  I've updated the fingerprint reader to the new version of the 20/04/09 3.2.0.341 and it seems to work very well.

• Can I upgrade my MacPro Xeon with new software?

  I have an older MacPro. The version of the software is Mac OS X 10.7.5. I want to do a completely new update. Is this possible?

  If your MacPro is at least a 3.1 i.e. 2008 model (at the beginning) it is El Capitan compatible.

  Check with 'about this Mac'

• take the server out of our area and don't put it in a new group of work, after the reboot, I can't connect now, no password works...

  Hello

  I just removed a win2003 server machine that is retiring from our field after conversion to our server VM.  I changed the IP and plugged into the network and then created a new working group called temp after getting the error "duplicate name on the network.  When I rebooted, it asks for a password but accept nothing.  I did not have a password for the Working Group, how can I get past this?

  Thank you!

  Need the password for the local administrator account.  This should have been implemented during the installation.  Other that that, we cannot help you crack or move in passwords.

  In addition, this should have been posted in the technet forums.

• Problem with slots Usb not work after installing Windows 7

  Hi all

  I just had a guy fix my brand new computer, after that it was abandoned due to an accident than an anne 5. I told him that I wanted Windows 7 installed on the computer instead of 8. He did and got it all and running, no seven complaints only 1 usb slot works now and don't rest. Question is how can I solve this problem? I tried unistalling and reinstalled it a nothing still.

  Want HP dv7-7230us

  Product #: c2n66ua #aba

  Possible the AMD Chipset is required - includes the drivers for the USB 3.0 ports:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• Sansui HDTV with PC quick entry works after change of pixels.

  Description of the problem: I have a HD of Sasui TV with an entry for PC I have deen usind more than a year.

  After changing the pixel size of the screen, we loss of image. The monitor works fine with my laptop. The monitor works in cmos and throughout the boot up to the windows XP screen screen and then turns off with this desktop computer. Dell monitor Im borrowing works fine. I may be wrong but I think that the driver may be bad.

  What I can do.

  Thank you

  Michael Bauer

  Operating system: Windows XP

  refresh rate is 75 Hz. Changed to 60 Hz. and the seams to have to fix the problem. Will freeze?

• EXE files created with aggregator does not work after installation of Windows update KB3132372

  outputs .exe created using Adobe aggregator only white screen after that the latest patch for Flash Player has been installed. One of our sites publishes several of these courses next week. They are working on a plan B, where they will release output .swf aggregated, but it's not ideal. No work around available?

  This is the second time that the Adobe developers make this mistake.

  There are 4 years, what a flash update made a black screen to all EXE Captivate files. At the time the patch is a patch to Captivate and republish all courses after the patch. At the time my company was in its infancy and had very few customers and has sold only a few products. Today, we delivered thousands of products to paying customers. If the fix is proving to be the same it would be our company cost very expensive and probably paralyze our business.

  It is unacceptable that a company such as Adobe provides an update to Flash without testing on their platforms. I'm not sure how many of you are in the same situation as us, but if you are please feel free to contact me.

  I would like to start sending my clients email complaints and claims directly to someone who cared about Adobe, but this only works if a person didn't care.

  THIS PROBLEM MUST BE RESOLVED AS SOON AS POSSIBLE AND NOT ONLY NOT DOING HALF A * JOB LIKE LAST TIME.

• Tibetan will not work with new FF; has worked before the recent update (on Mac OS 10.6.8 18.02

  I'm on a Macbook Pro running 10.6.8. I use Tibetan on the internet a lot; recently FF automatically updated at 18.02 and it stop working. Other (e.g. IPA and Chinese) unicode fonts work fine. No matter if I want to type or read Tibetan, neither appears. I rebooted, reinstalled and restarted (several times), uninstalled, reinstalled, etc.. Nothing seems to work.

  So Tibetan is not also work well here?

  • http://en.Wikipedia.org/wiki/Tibetan_script
  • http://www.incks.com/en/Tibetan.html

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.