SAP LMS

Similar Questions

• Captivate gel in LMS lesson

  I'm having a problem with some of my courses of Captivate and I hope someone might be able to help. I have 6 lessons which were published on a LMS system, but only one of them seems to work constantly. Each lesson has 5 quiz questions that are worth 10 points, the student is required to get 4 of the 5 correct questions. A passing grade is required on the quiz. The quiz allows 999 tries to get the correct answers.

  We load classes of our LMS, which is the SAP LMS. The problem I have is when I go through the lesson, deliberately fail, click on resume and then log off. When I connect, I'm on the issue, that I logged on, but the quiz freezes when I answered the first question. The correct feedback appears with a yellow outline around him and the quiz does not advance to the next slide. If only I disconnect again, he is still frozen when I log in.

  I have more than one lesson that does not have this, but a few who do. I don't know if the problem is something with my settings (can't see what I'm doing differently between those who work and do no work) or if it is a framework of LMS.

  I've attached screenshots of my settings in case there is someone who may have experienced something similar.

  

  

  

  Try to set the LMS report percent instead of Score.

  Set the necessary decline until option (to perform an obligatory passage can cause problems, especially if using data curriculum vitae bookmarking).

  If you are currently using SCORM 1.2 try SCORM 2004.

  Disable data summary bookmarking via LMS customization > check the box never send the CV database.  (if you get everything works fine, you can try to use bookmarking later... but he has been known to cause problems with some LMS)

• Help with SCORM

  I work on a course that was created by someone else and I have a problem with the results of the quiz. The quiz has five questions. Four of them are worth zero points. The fifth, where they acknowledge compliance with our code of conduct, is true or false, which is set to 100%.

  When we load into the LMS (we have an LMS SAP) the user is able to gain the qualification (i.e., they have successfully completed the course) whether they click Yes or no on the true or false question. I've attached screenshots. I noticed that there is no ID lens in place. There was a quiz before ID, but it did not work. I thought I should replace it with the ID of the true or false question, but it still doesn't work.

  If necessary, I can download the course Acrobat.

  

  If you really want the user of success or failure of the quiz, you may need to make some changes to your settings.

  You have set the value of the true/false question to 100 points.  This isn't 100%. That's 100 points.  It could be 10 points and still give a passing grade, if there are only 10 points can be found in the quiz.  The percentage of pass/fail is set to 100%, which is fine if you base pass/fail on getting 100% of the available points.

  Currently, you have the status of report complete/incomplete value.  Enter the success/failure.

  The LMS report as a percentage value, could not score.

  You say you have an SAP LMS, but you need to choose the data in report set to Adobe Connect Pro.  I recommend that you try to set it to Quiz results only.

  Report level is very much like Score report.

  Try these settings and see if you get better results.  Don't forget that if you ask for a score of 100% get a passing grade, regardless of the points return you true/false question must be the only measurable points throughout the module.  This means that there may be other interactive objects such as boxes click or buttons that have achieved results either.

• I need 3.5 because other versions are incompatible with the LMS

  The University is currently running BlackBoard Vista like the LMS. Firefox 3.5 is the supported version. Other versions are not supported. How can I get the version 3.5 of firefox to install on my computer? (Windows 7 OS).

  Install Portable Firefox 3.5.x on your hard drive.
  
  http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy35

• Sapera with IMAQdx

  Hello, I hope someone knows well the drivers (form Alliance Vision) for cameras Sapera LT. I'm editing of pre-existing code that uses widely IMAQdx pilots. I know that it is most likely impossible but I would use the camera will undermine with imaqdx screws. Is this possible?

  Thank you.

  Hello

  Sorry, IMAQdx is a driver designed to acquire images from GigE Vision hardware, cameras compatible IP (Ethernet) IEEE 1394 IIDC and USB devices compatible DirectShow. It will not work with the Sapera LT who is a third-party capture card.

  The use of the pilot of the Vision of the Alliance, is probably a good choice for your application.

  -Christophe

• apply the equation of variable step size lms filter

  Hello world

  can someone apply equation of step size for lms size filter variable step using labview. snapshot of the equation is attached with question

  Yes I can - can you?

  Sorry to say, but nobody here is going to write your code for you. You have to have a go at it and then you can ask questions when / if you get stuck.

  The LabVIEW basics are a good place to start if you are really new to LabVIEW.

  -CC

• What is the sapi?

  What is the sapi? where I can get tutorials on sapi.

  Speech Application program interface (SAPI). Google 'what is the sapi' and you can find a lot of information about this.
  http://www.Google.com/search?q=what+is+SAPI&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - org.mozilla & client = firefox-a

• Sapera LT with CVI

  Now this is heresy...

  Anyone could use a framegrabber DALSA and the Sapera LT C programming API to capture video from a CVI application?

  DALSA announces a C API language, it is not certain that it is possible to work with something else using PVC as a C compiler (which it can do - PCV is also a compiler C89 but not a C99 compiler).

  Thank you.

  You can do with the api of 'base' which is a Sapera ANSI C interface.  I had to UNDEF as some multiply integer type limits, then he compiled, linked and ran everything is OK.  I used the interface "framegrabber' rather than the 'camera' interface or"peripheral"to catch a ground test on a simulator.  I used the CCA and .cvi files that I created using CamExpert.

  I did it with CVI 9.1, WinXP SP3, will undermine LT 7.0.0, X 64 driver 1.5.  Works with single and double head X 64 acquisition cards.

  So using a framegrabber NOR is nice, it is also possible to use a framegrabber DALSA of CVI.

  Menchar

• IE8 with SAP Business Warehouse

  After installing IE8 update I can't use SAP Business Warehouse queries, which return the error messages.  I uninstalled IE8 and the update of security for Microsoft Office Excel 2007 KB969682, which restored the BW feature on our professional XP laptops, but it does not work on my Vista laptop.  It seems that some elements of IE8 remain behind.  How can I remove completely all changes made to the IE8 update?  I tried to restore to an earlier date, but gives me a blue error screen when I restore to a date prior to 6/16.

  I use a Dell Latitude E6500 running Vista SP1.  However, the incompatibility of BW and the incompatibility with the Excel security update occurred in 100% of the machines on which they were installed they are under Vista or XP.

  Hello Mike0653,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Sorry to hear you are having a problem with this and I understand your frustration.

  Try the following steps:

  IE8 system requirements
  http://www.Microsoft.com/Windows/Internet-Explorer/support/system-requirements.aspx

  How TO solve IE8 installation problems
  http://support.Microsoft.com/kb/949220

  I highly recommend to disable your antivirus and anti-spyware (other than Defender) applications before install (or uninstall) an update of IE.  If you use a third party firewall, I would recommend the neutralization of him and then activation of the front Windows Firewall install (or uninstall) an update of IE.

  Tip: Restart twice after installing IE8 Final.

  Tip: Make sure that your antivirus application and your third-party firewall (if applicable) all (other than the Defender) anti-spyware applications is supported in IE8 Final before decide you to install it.

  Assistance for the installation of Internet Explorer 8, installation and use (only) is available via the phone based on your locale through December 31, 2009. Clients must be running Windows XP or Windows Vista in a domain environment. U.S. & CA residents: 866-234-6020.
  Other:
  https://support.Microsoft.com/OAS/default.aspx?&PRID=13043

  Pasted from http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/9c5f373e-7667-4d6c-aa10-84185dccf887>

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sapera LT used with CVI

  Is that what someone has successfully used vision of DALSA, Sapera LT, with CVI library?

  Sapera LT supposedly has a C language interface.

  I have this poster in the forum of machine vision, but he seems to be more a SW problem (if, indeed, there are problems) a matter of HW.

  In principle, any standard interface of C (C89) should work with CVI I think... If it's for a framegrabber DALSA, or anything else.

  I was just curious if anyone had tried this specific thing, and if so, how it worked.

  Thank you

  Menchar-

  It turns out that you can use Sapera LT with CVI 2009.  You use the api 'base' which is an interface in ANSI C with the export header file and import for the DLL library is involved.  During compilation, I found 6 #defines which were redefined to somehow - the limits they were constant max on the different types of integers.    It seemed the stuff of limits.h, but it wasn't - I never figure out how or where he defined twice, so I just #undef had these just before the place where was held the redefinition and the problem disappeared.

  I was unable to use the framegrabber as a "camera" (peripheral), I used as a 'framegrabber"and loaded separately from the configuration files CCA and .cvi instead of a camera (.ccf) configuration file.  I have hooked up to a simulator CameraLink and grabbed a focus, then he wrote on the disk.  A close inspection of the data showed that it was seizing everything is OK.

  I used the 1.5 LT Sapera 7.0.0 and X 64 driver version.

  So I feel pretty good about this so far.

  Menchar

• SAP check printing with OCRA Questions

  We are researching the possibility to print cheques from SAP ERP (ECC 6.0) which have a requirement of the Bank for the use of fonts OCRA for analysis.   Everything I found, it does not appear that all HP laserjet printers have the integrated police.   Is this correct?   We have a range of HP printers that would probably be used (Laserjet 2420, P3005, P3015, etc..)

  Old posts, I see that there could be 3 options to print fonts OCRA, but the only documentation we saw which refers to setting sapscript seems look option (a) below.

  "Assuming that the printer has NOT OCRA as an integrated policy, you must do one of the following values:

  b get a font cartridge or DIMM (assuming that the printer supports this). you would then have to say your print/request driver (somehow) that the police was available.

  b get a soft-font loaded on a hard drive in the printer (but I do not think that LJ4000tn will have a hard drive?) and similarly arrange for your print/apply driver to use it.

  (c) to obtain a downloadable app-police (encapsulated PCL format) that you download to the printer when required; again, you will need to organize (somehow) to your print/apply driver to use. »

  I guess my main questions are: HP makes all the necessary documentation for impression ocra in conjunction with SAP?   Font cartridges the best option and is there documentation to use?

  Thank you for your time,

  Shawn.

  Shawn

  Glad to be of assistance.

  Note that you may need several different Cartridge/SIMM/DIMM hardware Add-ons to support different target device models (and some are not supported at all?).

  The 'downloadable soft police' option should work with most modern LaserJet printers (i.e. those that support PCL5) except for the cheaper "host-based" ones.

  But I have no idea (if possible) how you would say SAP to use such a font.

  Chris

• How can I disable sapi 6 and use sapi 5 in windows vista and windows 7

  any body know how to disable the sapi 6 under vista so I can install sapi 5
  because sapi 6 runs outside the visual studio programming environment and cannot be completely disabled in visual studio for tts activating tts recognition is still ongoing and hears the tts and conventional disabling command with sapi 5 is not completely turn off recognition

  or any body know how to turn off the microphone in visual studio
  I found a lot of examples for c +, but the order of the mixer is not in visual basic
  examples of c + convert no more Basic, I was able to find an example of visual basic 6 complex really but I am unable to convert on visual basic studio and like I said it's really complex and very original programming uses I suppose that if I looked at him with her for a year I could understand it
  but right now it's just jiberish

  Hello

  I suggest you post the question in the forums and check them out below:

  http://social.msdn.Microsoft.com/forums/en/categories/

  It will be useful.

• I use a system of LMS (Moodle). I am able to open functions within Moodle, but I can't impose in a dialog box. Advice?

  Moodle is an Open Source LMS.  There are discussion forums and live chats, that which I use extensively. I can't enter my Moodle courses, but once I'm there I can't dictate in any dialog box.

  Hello

  I suggest you to contact the manufacturer of the software to help with this.

• How to disable sapi 6

  any body know how to disable the sapi 6 under vista so I can install sapi 5
  because sapi 6 runs outside the visual studio programming environment and cannot be completely disabled in visual studio for tts activating tts recognition is still ongoing and hears the tts and conventional disabling command with sapi 5 is not completely turn off recognition

  or any body know how to turn off the microphone in visual studio
  I found a lot of examples for c +, but the order of the mixer is not in visual basic
  examples of c + convert no more Basic, I was able to find an example of visual basic 6 complex really but I am unable to convert on visual basic studio and like I said it's really complex and very original programming uses I suppose that if I looked at him with her for a year I could understand it
  but right now it's just jiberish

  Hello Cindy Jory,.

  Your question about Visual Studio programming is more complex than what is typically covered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please ask your question in the below listed MSDN forum.
   http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  Sincerely,

  Marilyn

• Windows Vista - the failed to initialize properly (0xc0150002) - SAP logon

  I have Windows Vista. After the installation of SAP GUI 7.1, when tried to access SAp logon I received this message "the application could not initialize properly (0xc0150002). Click OK to close the application. ». Help, please.

  Thanks in advance.

  Subrata - July 12, 2010.

  http://forums.sdn.SAP.com/thread.jspa?threadID=421729&TSTART=0

  Try to ask in their Forums.

  http://social.technet.Microsoft.com/forums/en-us/appvgeneralsequencing/thread/d55fe4b6-580b-4c7b-b54d-b4289eb5216a/

  Read the above info.

  See you soon.
  Mick Murphy - Microsoft partner