SAR Z30 blackBerry for BBZ30 value

Similar Questions

• Drive USB Z30 blackBerry for Blackberry

  I need to transfer data from my old laptop (which happens at the end of his life).

  How can I connect the USB to my Z30

  Thank you

  http://www.Amazon.com/BlackBerry-micro-USB-data-transfer-connecting-compatible/DP/B00OKZ0HQS

  is that you need to access the files on the USB key with your Z30

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• Z30 Z30 blackBerry for Blackberry mix

  When are we going to be able to use Blackberry mixture to Z30

  ccbjbcab1 wrote:

  When are we going to be able to use Blackberry mixture to Z30

  After releasing the 10.3.1.xxxx.

  BlackBerry mixture requires the operating system to be 10.3.0.xxxx or above to work, right there is only the passport and the classic (also the Porsche) that allows the mixture

• The Z30 blackBerry for Z30 software update

  There was no indication of when Verizon will push the new software for the Z30 update?

  you do not use link

  You use knowyou and drag this folder to him

• BBMaps Z30 blackBerry for the Paraguay

  Hello world!

  I m using Blackberry four years ago. And I m very happy with it. But a problem is, that I can´t use the BBMaps for my country which is the Paraguay. Is there any solution for this? Why this isn´t country available?

  Thank you for your answer!

  Greetings,

  MB

  Hi @Bartel

  Unfortunately the Paraguay is not supported by BlackBerry Maps

  Source; Availability of blackBerry maps

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• BlackBerry smartphones REINSTALL OS on BOLD 9900 Blackberry using the Blackberry for MAC software

  Hello. I need to reinstall the operating system Blackberry for my Bold 9900. I am using Blackberry Desktop Software for Mac.

  I found the instructions for Blackberry Desktop Software for Windows already, but it is not the same for the Mac. Help!

  Thanks in advance for your help.

  It's a bit dated, but:

  http://www.BlackBerry.com/BTSC/KB19915

• Sync of Smartphones blackBerry for MAC

  Does anyone have an idea when BB comes out a version of sync that works with a MAC an Entourage 2008. Looks like those of us with MAC and use Entourage are out here nowhere left land to our trying to get information from my Curve 8310 to my computer

  Hi and welcome to the forums!

  I'm not a MAC guy, but did you know that there is a forum called Blackberry for MAC that would probably have an answer?

  If you would post instead, please solve this thread by using the options on the star of the Bravo yellow!

  Thanks and good luck!

• Error during transfer of multimedia files from Mac to blackberry for blackBerry Smartphones

  Hello

  I have files of media for the transfer of problems from my mac for the blackberry pearl 8100. I have followed the steps and went in the media file selected 'receive via bluetooth' and is went to the mac and selected the media file, I want to send. The screen open on the mac in waiting to connect, I select Save device ringtones, get, forward the message on both devices doesn't have. I did all the steps on the support but nothing works. Both devices are paired I can send files from the blackberry for the mac, but I can't receive all multimedia files. I sent pictures of the Mac to blackberry and it worked fine.

  Need help please.

  problem solved. phone needed extra memory...

• BlackBerry smartphones wanting to buy a blackberry for att

  IM interested to buy a blackberry for att that I now have a smartphone with the new smartphone plan. If I have a blackberry that I will have all the features available or do I need a specific plan blackberry I want bbm and all functions of the RIM support.

  With a BlackBerry device will not allow you to get the full services of BlackBerry phones. In this case your should contact your mobile provider to find out how you can get BlackBerry services.

• 10g BEEP format-number for negative values does not

  Hi all

  I tried the following methods to get the negative number locked up with symbols ().

  1 update the mask of BI Publisher properties of field format to

  "#, # 0.00;(#,##0.00).

  2 tried the Oracle formatting options

  <? format - number:A.INVOICE_AMOUNT; "PT999G999G999G999G999G999G999D00? >

  What gives me the result as below,

  Output value

  23.45 23.45 - print correctly

  -12.90 (12.90 - closing paren "")' does not print

  Please help me get the parenthesis when generating the PDF file.

  Thank you

  I had the question.

  This is the format that was used in your model

  ###,###,###,###,###,###,###,##0.00;(#)

  The first half before; does the mask so no problem.

  But after; which is for negative values and that is not the correct format.

  Please use this format on the properties of form field that gives you good number format

  #, ##0.00;(#,##0.00)

• FDMEE mapping for a value empty in the cloud of SEEP

  Because we cannot write scripts in SEEP Cloud, how you géreriez mapping for empty values from the source file?

  For example, if the cost center is < white >, map it to C1111.

  You could create a residual mapping, try fundamentally to the scope of all your entity with explicit values, between, multidim, in several parts, such as maps and let the last as mapping to map to C1111.

  For example, if you have 5 entities A, B, C, D, E, you could create 5 explicit as cards:

  A-> E1

  B-> E2

  C-> E3

  D-> E4

  E-> E5

  and a supplement like the (residual) mapping

  *-> C1111

  Note: you must ensure that all other entities of vacuum are covered with your mappings but the residue.

  Hope that helps

• MEV: Column level of masking - error: ORA-28104: entry for sec_relevant_cols value is invalid

  Hi gurus,

  I try to hide the column to secure the table for a specified user, here are the details of the code that I use to apply security and DB:

  Version of DB: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0

  Security features:

  create or replace function kr_sec_function_papf (p_object_schema IN VARCHAR2,

  nom_objet_p VARCHAR2)

  return varchar2

  as

  p_nid varchar2 (200);

  Whoami varchar2 (100);

  Start

  If SYS_CONTEXT (' USERENV', 'SESSION_USER' ") ="VPDTEST ".

  then

  p_nid: = 'national_identifier = national_identifier';

  return (p_nid);

  on the other

  p_nid: = '1 = 2';

  return (p_nid);

  end if;

  end kr_sec_function_papf;

  /

  Code to add the policy:

  BEGIN

  DBMS_RLS. () ADD_POLICY

  object_schema = > 'APPS,'

  object_name = > "PER_ALL_PEOPLE_F"

  POLICY_NAME = > "secure_emp"

  policy_function = > 'kr_sec_function_papf ',.

  statement_types = > "SELECT."

  sec_relevant_cols = > 'NATIONAL_IDENTIFIER ',.

  sec_relevant_cols_opt = > DBMS_RLS. ALL_ROWS);

  END;

  /

  I get the error message when executing the above plsql block, the error is:

  ORA-28104: entry for sec_relevant_cols value is invalid

  ORA-06512: at "SYS." DBMS_RLS", line 20

  ORA-06512: at line 2

  Someone please help me solve the problem.

  Thanks in advance.

  ~ Krishna Nand Singh

  Hello world

  I had this problem to be solved.

  The problem is with the object_schema-online 'APPS', setting the schema name of the object is 'HR' and APPS a with the same name.

  The Correct code should be:

  BEGIN

  DBMS_RLS. () ADD_POLICY

  object_schema-online 'HR ',.

  object_name-online "PER_ALL_PEOPLE_F."

  POLICY_NAME-online "secure_emp."

  policy_function-online "kr_sec_function_papf."

  statement_types-online "SELECT."

  sec_relevant_cols-online "NATIONAL_IDENTIFIER."

  sec_relevant_cols_opt-online DBMS_RLS. ALL_ROWS);

  END;

  /

  Thank you

  Krishna Nand Singh

• Report shows a string "null" for null values.

  Hello
  
  I am new to BI Publisher and creating a report in the BI Publisher. In the game of null values, report prints as "null". I checked the query, it gives data blank (empty value) for null values. But in the report, it comes as value 'null' (string "null"). I need to show the report in the form of empty data for null values. Can you please help me to find the solution for this?
  
  Thank you much in advance.
  
  Concerning
  Garza.

  I responded to your cheque send only once.