Satellite L550D - WIFI connection stopped working

Similar Questions

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• LAN Connection stopped working on my computer running WIN XP MEDIA CENTER

  My LAN connection stopped working on my WIN XP MEDIA CENTER-based computer. I have access to the internet with optimum online. I have a router connected to my cable modem (US Robotics) wireless and desktop with the functioning of the wired connection stopped. My wireless connection on my laptop works very well on the same network. I first stop the modem, router, computer and re started at all. Modem Router 1 2nd, then on computer. Usually works, but not this time. Contacted optimum online and went through some procedures to correct the problem. Open cmd prompt, ping tried only to get 3 of any answers and 1 reply. Tried ipconfg / renew, did not work.  Firewall had closed during all of this. Service representative from optimum online said that he could see my modem was working but something like a firewall was blocking my computer access. Tried ipconfig/all and gave him the ip address he asked which showed, 169.254.80.196, he said that address will not work and we continued trying to renew the ip address, and we could achieve.

  Now I mention here that this problem occurred when I had a power surge while I was online. I rebooted and this is the problem that I was. I asked the rep optimal online what else could be the cause as a virus or damaged surge my LAN or OS and he said for me to try to get in touch with microsoft and perhapse they could help me more. I hope someone has an answer for me.

  Please... Help!

  Thank you

  Don Soutar

  Watch 169.254.x.x IP address only:

  • The connection to the LAN is configured to obtain an IP address automatically, and:
  • He cannot communicate with your router to get the address.

  The surge may have damaged the computer's Ethernet card.  If so, replacing it with a new adapter will fix the problem.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• EASY CONNECT STOPPED WORKING

  I clicked on ' nearby remote assistance and resolve problems "and he says:

  Problems found

  Your computer seems to be configured correctly, but the device or resource (Server NVRP) does not

  The PNRP cloud specified could not start correctly the server: prnpv2.ipv6.microsoft.com; pnrpv21.ipv6.microsoft.com

  I don't know what all this means.

  It stopped working before... I installed McAfee and after a bit of reading on the internet, I got rid of McAfee and Easy Connect reworked.

  Now I just use Windows Defender and Windows Firewall and have not installed anything new with the exception of Windows updates.

  Thanks for your suggestions.

  Additional wire duplicate content:

  EASY CONNECT STOPPED WORKING

  I clicked on ' nearby remote assistance and resolve problems "and he says:

  Problems found

  Your computer seems to be configured correctly, but the device or resource (Server NVRP) does not

  The PNRP cloud specified could not start correctly the server: prnpv2.ipv6.microsoft.com; pnrpv21.ipv6.microsoft.com

  I don't know what all this means.

  I just used Windows Defender and Windows Firewall and have not installed anything new with the exception of Windows updates.

  I tried troubleshooting network and the internet and the problem persists.

  I looked at what follows, and they did not help to get Easy Connect works again.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-use-easy-connect-with-Windows-remote-assistance

  http://Windows.Microsoft.com/en-in/Windows/Windows-remote-assistance-FAQ#1TC=Windows-8

  Hi compounded,

  Thanks for posting on Microsoft Community.

  I appreciate your efforts to try to solve this problem.

  I'm sorry to know that Easy Connect does not work and it seems that there is a problem with the connection to the peer name resolution server.

  In peer-to-peer environments, peers are based on name resolution systems to resolve each and other locations (addresses, protocols, and ports) from names or other types of identifiers network. Peer-to-peer name resolution has been complicated by transient connectivity and shortcomings in the domain name system (DNS).

  Peer-to-Peer networking platform solves this problem with the PNRP Peer Name Resolution Protocol (), a secure, scalable, and dynamic name registration.

  This question might be the best answer by TechNet. Then I suggest you send the request on the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  In the future, if you have problems with Windows. Not to contact us. We will be happy to help you.

• Satellite L300-1BW - wireless connection stops working after 10-15 minutes

  Hey!

  Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

  When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

  I know full well it's not my Netgear because it work fine on all the other my computer.

  IM wondering if anyone could possibally help me. I would be grateful anyhelp.

  Thank you.

  Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

  Hello!

  If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

  In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

  Good bye

• A WiFi just stopped working on my Satellite A300

  I bought a Toshiba Satellite A300 (Vista) and it all started very well. The second day my wifi only stop while I was online... just after does not do anything and now I can't turn it on. The touch wifi and FN + F8 is running. Configfree even can see if the wifi button is on or off, but I do not see the wireless connections (theres allows to be 5 - 6 of them where I live... so theres nothing wrong with the router).

  I can add that there's no conflict in the wireless card and all drivers are up to date. Is this a hardware problem? What are my opptions here?

  It could just be a software problem. Have you recently installed a firewall or Internet Security program? Try to disable them.

  If this does not help, run recovery to reinstall Windows to its factory condition, and then try again. If it still does not work, then it might be a problem with the hardware. First, try a BIOS update and the update of the Wifi pilot before you send the laptop to an ASP for repairs.

• Satellite M40X - WiFi connection no longer works

  Hello

  The WiFi on my Satellite M40X has stopped working.
  ConfigFree verdict: wireless communication switch: inactive
  Diagnosis of Toshiba: Atheros AR5005GSwireless network adapter version 3.1.2.45 is OK.

  If the switch is the cause of the problem?
  When sliding on 'on', the red LED lights up.

  Thanks a lot for your help
  Roussco, France

  Hello

  There are display settings important to do to be able to use the Wlan.
  First you must activate the Wlan: generally it takes the switch Wlan on POSITION (LED should be bright) and you must activate the Wlan using the Fn + F8 key combination.

  Is this possible?

  By the way: what system are you using?

• Satellite C855 - speakers suddenly stopped working

  I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee). I have the latest Windows. Since then I have not installed other applications.

  Three days later, my laptop was working fine until, suddenly, that the speakers stopped working. I can identify the specific incident that caused it. I connected a pair of perfectly ordinary headphones using the standard headphone jack, power the laptop off, after that I was done listening but headphones plugged on the left.

  When I turned on the laptop back the next day, no sound came in headphones.
  When I unplugged them, no sound came from the speakers.
  I rebooted my machine and the speakers worked fine.

  However, I am now in a situation where whenever I turn on my laptop, the speakers do not work and they will work again when I restart then. A little investigation of this problem shows the following...

  Whenever I turn on my laptop and go to control panel-> hardware and sound-> manage Audio devices I see two items:

  (1) ' - high definition Audio Device - speakers not plugged"with a speaker greyed out icon with a red arrow.

  (2) "audio digital (S/PDIF) - high definition Audio Device - default device" with a colored external amplifier icon (it looks a bit like a DVD player) with a green check mark. There is an icon of audio level next to him that shows sound whenever the sound is played on my laptop, but no sound is audible, either through my speakers or headphones.

  Whenever I then reboot my laptop and go to control panel-> hardware and sound-> manage Audio devices I can see an article:
  "Speakers - Realtek High Definition Audio - Default Device" with a colorful speaker and a green arrow icon. The sound works perfectly well.

  I already looked online and the Toshiba forums for a solution to this, but while I found lots of people with similar problems of speaker with Toshiba Satellite laptops, I have not found a solution (and when I say something, I mean something a little more useful that "have you tried completely reinstalling your operating system') so this thread.

  Even if a reboot is currently to solve my problem, I obviously shouldn't have to restart my machine at all in order to get something as simple as his, so my questions are:
  (1) what is the cause of this problem - in other words, why what is happening?
  (2) what is the Toshiba solution to this problem?

  Thank you very much.

  Hello

  It seems to me that the issue you described above that the speakers would not be chosen as device by default, but the Audio Digital (S/PDIF).
  Somehow the audio driver cannot detect the first initialization of the system speakers.

  I don't know why this happened but I have two proposals:

  (* 1) * uninstall the audio driver from the system. Download the driver from his most recent of the Toshiba page and install it after restarting the laptop first.

  (* 2) * if installing the audio driver is not enough, the last resort would be the recovery of the system.

  (> 2) what is the Toshiba solution to this problem?
  If you want to get a recommendation of Toshiba, I would give advice to connect with people. It is the community of users.

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• Satellite 1130-Z24, system stopped working altogether

  Hello

  My system stopped working altogether, since it was abandoned, from short distance however. When it is connected to an electrical outlet, the light work, so I suspect power are trying it, and I think I've damaged the motherboard or the power, but I hope that something simple. Someone at - it all manual showing how to disassemble the satellite 1130, or any other suggestions.

  Kind Rgrds

  Chris

  Hello Chris

  There is unfortunately no official document how dismount/mount your Satellite. In my opinion the best solution is to contact the Service of your country partner.

  I'm sure they can help you. Who knows what part of the equipment is damaged.

  Good luck!

• Satellite A130/135 completely stopped working

  I have a laptop Satellite A130/135, that completely stopped working. During use, it turned off and became completely unresponsive. Even the lights which show that the notebook is load / connected does not illuminate.
  Does anyone know what is the problem?

  IM distraught about what I can do everything so any help is appreciated.

  Post edited by: kseagles

  Hello

  I think that it of really not easy to say what could be the problem
  I can only suggest

  Depending on your message, nothing appears on the screen not even if you would not try to boot from the recovery disk or other bootable discs. Is this good?

  You could try a procedure;
  -Remove the battery and unplug the AC adapter from the portable computer
  -Wait several minutes (about 30 min)
  -try to boot the machine

  Check it out, but if you will not be successful then a hardware malfunction could be the cause of your problem, and you should ask the local ASP to help him!

  Good bye

• Satellite Pro T130 - WLAN stops working on battery

  WLAN in Toshiba Satellite Pro T130 will not properly work on battery
  Toshiba Satellite Pro T130 with Windows 7-64 bit

  My Realtek RTL8191se card stops working when the notebook computer is on battery power. Everything is OK on the socket. On battery it works OK for a few seconds/minutes and then drop connectivity. The driver is 2015.1.427.2010 - the latest version.

  I disabled the settings related to energy-saving WLAN cards.

  Any ideas on how to find the cause of this problem?

  Thanks in advance

  Chaouki

  Hey Buddy,

  Well, generally, I would suggest that you should disable Windows in energy saving power management feature, but you have already done this... Make sure that this power WLAN economic option is set for maximum Performance, even for the battery mode and all power profiles!

  And what BIOS up-to-date? You have the latest version of the BIOS installed or using an older version?

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro L500 - Webcam stopped working

  The Web camera integrated on my Satellite Pro L500 stopped working with the following message:
  C:\Program Files (x 86) \Toshiba\Toshiba Web Camera Application\TWebCamera.exe

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
  The event log points to microsoft.vc80.openMP.

  Could someone tell me please how to fix the web camera. I use it very rarely, so I don't know exactly when it has stopped working.
  Thank you.

  Hey,.

  What do you think about reinstalling the webcam software? Maybe it will work

  Please see the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just search your laptop model and the available downloads. If you find it, download the new Camera Assistant Software but before you install it, first remove the old version and restart your computer.