Satellite 1800-100 - cannot start when the cable is plugged

Similar Questions

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• Satellite L450D - 13P cannot start with the new HARD drive

  Hello

  IME novice steve and real computers.
  Two years ago I have toshiba purchest mine 2 is the toshiba satellite L450D - 13p runing windows7! And my partners is the toshiba satellite pro 7 also runing windows!

  The problem is that my hard drive is scrap, so I purchest a new 500 gb HDD, instaled it put in the disk I got with him and nothing?
  Hope any 1 here can help me

  Thanks a lot steve!

  In general you can swap the HARD drive or update it with more a (ability), but the installation of recovery should work. It is important to use compatible HARD drive for certain system.
  I did several times in the past. No problem at all.

  After HDD change the value of the BIOS default settings and start recovery installation using created the recovery disc.

  Start your laptop and when you see Toshiba welcome screen pres F12 repeatedly to enter the boot menu.
  When the menu is displayed on the screen, put the recovery DVD in the optical disc drive.
  In the menu choose you CD/DVD and press ENTER.
  Installation of recovery should start.

  Please do so and send feedback.

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Envy of HP dv6-7210us: No TV sound when the cable HDMI plugged to the PC

  Hello.  Worked last week and the connection mths prior HDMI, TV had sound.  This weekend, 20/08/16, the TV sound went, but still had the video.  Watched forums, utube and do the audio control panel Device Manager.  Audio high definition Digital Audio-AMD display device; not plugged in is grayed out.  clicked on it does not.  the default configuration is also grey so I can't even define a default value.  PC speakers.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  has worked for months and now no sound.  any idea?

  Hi @glgar1,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you had previously no problem with the sound of the TV connected via HDMI. Last weekend, the noise disappeared. You have looked at the HP Forums, YouTube and checked in the Device Manager. Audio high definition Digital Audio-AMD display device; not trendy, is grayed out. and you clicked on it nothing doesn't. The default configuration is also grayed out, but the PC speakers work. You have successfully updated all the drivers. You bought a new HDMI cable, but change the cable did not help.

  The birthday Windows Update has been installed? 10 1607 Windows version. Have you tried to run the troubleshooter in Windows? Have you checked against viruses and malware? Did you run the HP Support Assistant? Here is a link to a post on answers.microsoft.com that can help. Audio HDMI 10 Windows does not? If the problem persists you can try to uninstall and reinstall the audio driver from the Device Manager.

  • Open the Device Manager
  • Click outputs and inputs
  • Right click on the speakers and uninstall
  • Restart your laptop

  If the problem persists, try using a different driver.

  • Open the Device Manager
  • Click Audio inputs and outputs to lengthen the list
  • Right-click on the speakers and click on update driver software
  • Click Browse my computer for driver software
  • Let me pick from a list of device on my computer drivers
  • Select the Audio device high definition
  • Click next and follow the prompts.

  If the problem persists, you can try a restore to when it was working properly. Computers HP - using Microsoft System Restore (Windows, 10, 8) Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• Lenovo ideapad laptop z500 won't start without the cable connected

  Hello

  My z500 cannot start without power cable is plugged. In general, a few seconds after I saw the lenovo logo, the system stops suddenly as if the battery was removed.however, if on that I connect the cable to the laptop and power, all right, I can enter in windows 8, or ubuntu, after I enter the OS, I can disconnect the power cable without any battery problems.the is healthy and can last for more than 2 hours. Is it someone has an idea what is the problem and how to solve

  so far, I have tried the following methods:

  1 update BIOS

  2 firmware update of the battery

  3 reset the BIOS

  None of them worked for me

  Hi maoxiaomin,

  Thanks for posting back.

  Sorry we could not be of additional help and please contact our service, if you need more help please do not hesitate to post in the forums.

  Concerning

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• Satellite 1800-100: message - Bios block3 damaged

  When my Toshiba Satellite 1800-100 startup appears «block3 damaged, please call military...» ». The CPU, memory, RTC battery, main battery, hard disk, power, work correctly.

  I tried to update the bios of dk using the F12 key without errors, but the message is the same at the start.
  Please, help me.

  Hello

  There is nothing wrong with the hardware of the laptop but only with the BIOS!
  I read a few threads on a similar BIOS problem and it seems the BIOS has to be flashed again on the special way!

  It should be a message sayingPlace a maintenance disk in the drive and press on enter.
  Am I wrong?
  Well, this disc of maintenance is needed to repair the BIOS and only the authorized service provider could do that!

  In my opinion, you should contact the ASP in your country for assistance!

  PS; I found this very interesting forum thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72596

  It is perhaps useful to s

• Satellite 1800-100: bad XP drivers?

  I visit the pages of pilot official Toshiba via the homepage of support, but as this link and Satellite 1800-100 pilots are wrong with OS compatibility:
  I selected and download drivers for Windows XP, but none of the drivers can be installed under XP because of these messages:

  http://support.toshiba-tro.de/tools/satellite/S1800-ps181e/win-XP/IrDA-XP-41019995.zip-impossible to install the infrared driver because of this message: "it is a different style INF" - it is made for Win ME.

  Also "Aladding Cyberblade - Trident' display driver for XP cannot be installed, the message:"the driver is not compatible with XP.

  Why are there bad drivers on Toshiba support satellite 1800-100 pages?

  Also how can I run "Wireless link" for an infrared connection, whatever I do, I can't open 'wireless link in Control Panel icon', I click on it but it does not open without any alerts.

  Help, please.

  Thank you.

  I can't believe that. I n t have this unit but I have download several drivers, unzipped, and he seems to be good.

  In any case, try to use the drivers provided by the other 1800 satellite.
  I found the description in the option more information that most of the drivers are the same on the Satellite 1800.

  Check it out

• Satellite 1800-100: video output does not work

  Jen
  I just installed windows XP on my old Satellite 1800-100, but now my video output no longer works. So I just downloaded the latest version of the driver, but there is no way I can get it installed. According to Windows the new driver is more recent, so it won't let me update. And when I try to uninstall the display driver, I have to restart for the taking of effect and wile it restart automatically installs the standard driver again.

  Can someone help me?
  Welcome,
  Daan

  Hello

  You say TV out port, or monitor the port? As far as I know, this unit is pre-installed with Windows XP Home edition at home and all the drivers can also be used for WXP Pro.

  You preinstall your own OS (no recovery image)?

• Re: New SD-R6472 satellite 1800-100 - player target not found

  Hi fans of Toshiba

  I have a Satellite 1800-100 and bought a Player DVD SD-R6472
  I downloaded the SD-R6472 csel changer program but cannot execute it.
  It says "target drive is not found.

  I have already download the latest version of the bios

  Anyone know what to do next?
  It would be much appreciated if someone could help me on this

  Best regards
  Chris

  There is a simple explanation; the firmware that you use is simply not compatible with your SD-R6472 drive.

  I don t think you will succeed to Flash the drives settings.
  Is that these tools is not available on the Toshiba page and I doubt that any software 3rd party would be able to do this

  Before you buy a CD/DVD drive, you must make sure that such ODD would be compatible with your laptop.
  In my manual, I have found information on compatible players.
  Maybe your user manual would provide info on the STRANGE compatible too
  If this isn't the case, then you should contact the Toshiba ASP for information on compatible CD/DVD players.

  Have a nice Weekend

• Satellite 1800-100: BIOS error message

  Hello
  I got a message when I turn on my satellite 1800-100.
  "bios (block3) is damaged (call your local Department of human)." "Place a maintenance disk in the drive and press to enter.
  I downloaded the bios and inserted in the drive. The laptop read the disk and successfully write the new bios, but when it restarted it have the same error message. So I need the MAINTENANCE DISKETTE.

  Thank you.

  Hello

  In my opinion, this disc has all the service partner. In my opinion, you should contact them. You will be very happy if a user has something like that especially for this device older (three years).

  Good bye

• Question on change of processor satellite 1800-100

  Al first of all, Hello to everyone. I have a Satellite 1800-100 with a celeron 800 mhz CPU.
  I have from another DESKTOP PC, a PENTIUM III 700, and I want to improve my toshiba with this processor. I probed this celeron 800 mhz CPU during this work computer desk 1 year ago and it's because the processor of this Satellite is not a special mobile chip, with less power, etc.. It s a normal desktop CPU.

  But I want to install the 700 mhz PENTIUM III CPU inside the laptop, but...
  What I have to change the jumpers in the 1800-100 motherboard to install the 700 mhz pentium III or this motherboard is able to auto-detection of the processor type and automatically configure itself.

  Hello

  Usually CPU replacements on laptops are not compatible and it s still a very risky game. It can happens that laptop does not work properly or will not
  In any case, I discovered that the Satellite 1800 series supports a Pentium III or Celeron processor.

  This processor can be used:
  -Basic operation of processor Pentium III with a clock internally 750/800/850 MHz, 100 MHz bus, and 1.70V
  -Internal basic operation of processor Pentium III with a clock of 1000 MHz, 100 MHz bus and 1.75 v

  -Basic operation Celeron processor with a clock internal 800 MHz, 100 MHz bus and 1.70V
  -Basic operation Celeron processor with a clock internal to 700/733/766 MHz, 66 MHz bus and 1.70V

  > What I have to change the jumpers in the 1800-100 motherboard to install the 700 mhz pentium III or this motherboard's power auto detect CPU type and auto configure itself.
  To my knowledge, it should start automatically. You do not need to change anything.

  But note; I m not 100% sure that you'll be able to remove the CPU because the CPU can be welded on the map.

  Best regards

• Satellite 1800-100 microprocessor upgrade

  Hi!, thanks for this forum.

  Okay, I bougth a satellite 1800-100 four years ago in a shop, here in Spain. I improve my memory with a module of kingston pc100 144 pin with 256 MB. I mounted this module because this motherboard FSB is 100 Mhz.
  Now, my laptop has 384 MB of RAM.

  But, I would like to increase the speed of my 1800-100

  I opened the laptop to investigate the resources inside. I mounted and dismounted several times, CPU Intel celeron 800 Mhz processor. But I Don t know if it is possible to have more information on the characteristics of motherboard'internals. I would like to know which is the microphone the quicker one can get in my book. ¿Celeron 900, 1000, 1100 or more? Where can I get a pentium III 800, 900, 1000, 1100 or more? I didn t see indications or jumpers in the motherboard on the tensions, or speeds and I Don t now if this motherboard determines automatically the voltage and speed when the microphone is mounted. I have 1 or 2 microphones of fastest in the House, and I want to ride in my laptop
  without the risk of burning the microphones or the motherboard. Is posible to find information on our satellite motherboard. I Don t know who is the superior of technology of microphones that are supported in my 100-1800.
  It is the only way to increase the speed, because the chipset is not really good, and cheap nor quick. I think that when someone buys a computer, desktop computer or a laptop, it can receive all the documentation about the inner workings of a computer, so isn´t?

  I m sorry for my questions severals, but I m very intetesred with this problem...

  Thank you all...

  Hi, Rob

  Information about the technical details on his books will be no manufacturer of space available.

  A laptop is high designed compact Machine, which is not
  be for the upgrade of this element by anyone.

  OK, hard drive and memory are no problem as long as you can catch this part by opening a ceiling with screws.

  So finally, you won't find the technical details of the motherboard is this Forum here, the only chance I have is to talk directly to a technician of Toshiba.

  Maybe he'll tell you a bit about you looking for ;)

  Good bye

• CPU upgrade in Satellite 1800-100

  Hello!

  I have a satellite 1800-100 and I was wondering if the computer's bios supports a pentium 3 cpu, it has a celeron processor. I found a topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1591&messageID=3907#3907

  but he Don t have no response.

  Can someone tell me if this is possible? a P3 850 is really cheap and it could be a great upgrade :)

  Thank you

  Hello

  The processor upgrade is not possible, as far as I know. A long time ago a user has tried the same thing and the new processor has damaged a whole unit because it was not properly cooled.

  Please be careful about this.