Satellite 1900-102: drive will not read discs of backup data after formatting C:

Similar Questions

• My hard drive will not read discs! What should I do?

  My laptop will not recognise discs I put in the forest of cd! I am trying to install Microsoft Office, and it will not even read the disc! Are there other ways of installing Microsoft Office? Or any suggestions how I can get the t hard drive work?

  Thank you

  Any comments would be much appreciated!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Satellite M30: the drive will not read or burn a dvd - rw - Xp SP2

  I have my carpet and M30 * one dvd not read or burn dvd - rw. Tried driver implemented to date, but without operating. Help, please!

  Hi Khalifa,

  Until you can play a DVD - RW on your M30 the DVD must be finalized. In order to record on a blank DVD - RW the drive must be formatted first (using something like Nero INCD). If all goes well, then you should be capable of both wathch and burn DVD - RW discs. :-)

  Kind regards

• My hard drive will not read discs?

  Hello

  I'm a moderately experienced computer nerd, and today I met this problem I can't solve everything. Late in the afternoon, I noticed that my (DVD - RW) disk drive wouldn't read my drive, so I went to do some testing, (assuming that the problem was the disc) and I found that it would not read any disk I put in it. CD or DVD would work. If at this stage I think it's a problem with the drive itself, so first, I uninstalled the driver for my DVD player and restarted my computer, but that did not work, so I plugged in an external CD player I got earlier. (who has been confirmed to work in the past) And that itself doesn't has the same work. If at this stage I think it's some kind of virus or malware or something of the sort that could prevent any kind of disc. So I did two scans of all of the computer (1 scan Spybot) and 1 AVG scan AVG came up with nothing, and Spybot came with the usual threats of low priority. So I had difficulty all 'threats' Spybot finds it, but it is still impossible to get either of my drives to work. At this point, I'm at my wits end. I'm running out of ideas, and I'm exhausted. So, any help would be appreciated. Thank you! (by the way, I use Windows 7 Ultimate)

  I could finally understand! This idea has just popped in my head that maybe the laser needs to be cleaned. So I veerrry clean gently with one of these sweet rags that come with the latest TV, and I noticed that you can move. So I took a paper clip (just to be more specific about what I might touch) and I moved the whole part of laser to the outside edge of the disc. And then it worked perfectly fine. Thank you all for your help.

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• XP display for Satellite 1900-102 driver

  Hello

  I'm looking for a display driver for my old Toshiba Satellite 1900 102.

  After Installing Win XP Pro, a generic driver for ATI Mobility Radeon was automatically installed, and it is not working properly.

  Refreshing window is very slow and impossible to manage or configure.

  I'm trying to find it but it seems impossible to me.

  Can someone help me please?

  Thank you.

  Kind regards

  Vito

  Hello

  > Refreshing window is very slow and impossible to manage or configure
  The problem is that a graphics driver has not been installed and the Win operating system uses own common Microsoft driver.

  To resolve this problem, you must install the graphics driver of the European driver Toshiba page.

  To find the page of the European driver follow this path;
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  You have to search the ARCHIVES!

  Good luck

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My D: drive will not read DVDs

  Hello

  I have a desktop with windows Vista and my D: drive is not reading my dvd.  Can you tell me what I should do to fix this problem?

  Run repair:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems I hope I could help

• Satellite M30X: reader will not read the DVD-R data but plays movies in DVD-R and CD

  I have a Toshiba M30X with combi DVD/CDRW drive.
  I have accumulated 12 GB of digital photo I wanted to erase but do not want the number of CDs that can be the so I bought an external DVD LITEON EZ - DUB and made 3 DVD - R burner of plenty of JPEG.
  However, when I put the DVD in the drive of Toshiba combi, it clicks for a moment or two, but when I click on the combi drive in my computer, the folder is empty and it is said there are 0 bytes.
  CD of still works, audio and data, DVD movies fine, reading DVD-R on my Pioneer DVD recorder (for TV - looks like a video/nothing to do with PC) plays very well, but he won't recognise DVD - r with data (JPEG or MP3) on them.

  It makes no difference what software was used (Nero 6.6) and LITEON EZDUB and it's okay if the discs are completed, a single session, multi session or what - it will not play any of them.
  However, these discs work perfectly in my old office to 7 years with a Sony DVD/CDRW combination of 4 years.
  I'm puzzled.
  I don't particularly want to reinstall windows, in the case where it does not recognize the recovery DVDs and I remember Microsoft a Note having activated by phone with a code that is different every time you ask him to generate a.
  It's a bit of pain that I wanted to make my pictures with me in my laptop bag.
  I won't be carting around an external DVD burner just to read the DVD.
  I've updated the firmware for SD - R 2512.
  He had no other effect freeze on a black screen on restart - I had to hold down the switch 15 minutes in this State.
  The laptop is 1 year and 26 days if that counts for anything.

  Anyone have any ideas? Or can I just put up with him.

  Hello

  Well, I can only make suggestions.
  You are able to place files many MP3 and Jpeg on DVD.
  This is perhaps a reason why Explorer cannot handle the DVD.

  Try to burn the DVD with photo JEPG, but do not have the full DVD with these files.
  You must leave a free space on the media. Maybe it helps.

  But it's very strange for me and it's just a suggestion. I've never tired it and don't know if it helps.
  I had a similar problem on my laptop but I solved using compatible media. Some readers prefer different media for different types of files.

• CD / dvd drives will not read / write to any disk

  Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!

  Hello

  Its not unusual for the same problem have an impact on both drives, in fact its very common.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.