Satellite 2410-303 startup problem,!... urgent

Similar Questions

• Satellite 2410-303 startup shows "bad check sum (ROM).

  My toshiba before starting displays this warning (I press "Ctrl + Alt + Delete" and then it begins to start):

  Bad checksum (ROM) *.
  Check the system. Then press the [F1] key.

  What it means? I put the bios password of HW SETUP. My friends entered the wrong password nine times, and this message is displayed by the system. What should I do?

  Also, I am closing the screen (it should turn to stand-by). When I opened the screen, nothing works. How can I solve this problem? If I format it, it can work normally?

  Post edited by: fe above

  Hello

  A "Checksum error/failure" can be caused by different causes. When this error is displayed while the unit boots, try this:
  -keep the ESC button and start-up
  -When the message "control system, then press [F1] key" product key F1
  -After this, press the end key and confirm with Y (pay attention to hints Y and Z)

  If the error is still there, it may be that the battery is empty or has to be replaced. The first thing you can do is to let the unit more than 48 hours on permanent power supply. Otherwise, what you should contact authorized partner service and CMOS battery must be replaced by a new.

• Satellite 2410-303: Question about software update and service in the northern part of Cyprus

  First of all, I have a Satellite 2410-303 and I hoped that I can update my toshiba but there is no my toshiba model name in the Download Center. It has 2410-303 in the Download Center and I install the update on my toshiba. This will damage my toshiba?

  Secondly, I recorded my toshiba. I can access my account, then I'll download center update but my toshiba model is not correct (Magnia 550 d isn't my toshiba). I do not have other updates. How can I solve this problem?

  Finally, studying at University of the Eastern Mediterranean in Northern Cyprus. I am waiting for this area, but I could not find any point of service. Is there any point of service in the northern part of Cyprus?

  Thank you very much for interested in my topic and your comments!

  The simple driver update will not damage your laptop but the incorrect BIOS.
  Anyway, Sam is right. The S in the first step means satellite. This is why you must use drivers for 2410-303. These are the correct drivers and they should work on the laptop.

  If you are looking for the right service partner I would say visiting this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  You will find a database with ASP together all over the world.

• Satellite 2410-303: upgrade of posibilities

  I have a Toshiba Satellite 2410 303 and I want to increase the RAM from 256 MB to 1Gig and 30 at least 60Gig HARD drive.

  If I understand the user manual that the 2410 can be up to 512 MB (2x256Mb) but the retail sites of the State of the RAM up to 1 GB...

  Also, what size HARD drive can go up to and how to change it?

  Dean

  Hello

  If the site Web of the specification of the RAM up to 1 GB, you can install 1 GB of RAM in your model. See the attached link:

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&PRODUCT_ID= 21051 & DISC_MODEL = 0

  To upgrade the HARD drive, it should be no problem. You can insert each HARD disk (2.5 (2,5")") in your model, no matter how big it is (must only be supported by the operating system).

  BR, Ben

• Satellite 2410-303 - I can he move to 2 GB of RAM?

  Hey

  I have Toshiba Satellite 2410-303 and I want to upgrade the RAM.
  This work Satellite 2410-303 2 x 512 MB (1 GB max) DDR1 266 MHz (PC2100). Today is not easy to buy that RAM, and 1 GB is not.
  I think the BIOS update, but on the [main site | http://ce.computers.toshiba-europe.com/innovation/download_driver_details.jsp?LNG=20&service=CE&selC fulltext = 8 & selFamily = 192 & selSeries = 116 & selProduct 3 95 = & selShortMod = 200 & language = null & selOS = null & selTyp e = null & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = null & selectedLanguage = null & type = null & pag e = 1 & ID = 22031 & DISO =-1 & driverLanguage = 42]

  Is there nothing that contains the new BIOS.
  I have now, I'm not if update BIOS give me the possibility to expand to 2 or more GB of RAM.

  Maybe someone can help me and find out what effect update to give a new BIOS.

  Good bye

  Hello!

  Well buddy, new BIOS doesn t improve the maximum capacity of RAM so it s not necessary to update the BIOS.
  In addition, the Satellite 2410-303 supports up to 1 GB of RAM. If you already have the maximum RAM capacity.

  In your case I would update the BIOS only if you have some problems with the laptop. If you can find t a change log on the Toshiba site is not available.
  Last but not least never touch a running system. ;)

  Good bye

• Satellite 2410-303 crashes when the cache CPU 2 level has been activated

  I have Satellite 2410-303 Bios version 1.40 and when I activate CPU level 2 cache dose of laptop not working still hang.
  So now, I have only to activate CPU level 1 cache and turn off level 2 cache if the laptop run slowly.

  Hello

  Well, what to say, the level 2 cache is an external memory to the CPU.
  Maybe there is something wrong with the CPU? Who knows

  Have you tried to update the BIOS? Check if this is possible and if the newer BIOS version is available.
  Sorry, but I cannot suggest alternatives because to me, it looks like a hardware problem and in this case the ASP help is necessary.

  Best regards

• Satellite 2410-303-display flashing, update the BIOS

  HY!

  I am the owner of the Satellite 2410-303 series. Display does not work very well. I do not know it is because of drivers (even me, I installed the drivers by default) or maybe it's because the LCD screen. Maybe poor contact or something like that? I don't want to take my turn for the service center more because they don't know how to solve the problem. Only what they say is: «I'm sorry, but you have to buy a new...» »

  In speaking of the bios it is 1.20 in 2002. I want to download 1.40 (think it's most recent) but do not know where to download... Please help because this is my first tour & I want to revive his soul... THX.

  Hello

  I always thought that this forum is serious, but you try to make us laugh reading your ad.

  Sorry, but your comment about service is for me really ridiculous. Do you really think that all the issues can be fixed and nothing should be exchanged? I respect your opinion, but I think you're not qualified to talk about. Or maybe you're a technician material. If so, then I feel sorry for my comment.

  Anyway, if you have a display problem trying to connect to external monitor and see exactly what is happening. It will be interesting to know how starts flickering.

• Can I go by Satellite 2410-303 with 120 GB of HARD drive

  Hello
  I have a Satellite 2410-303 (acquired in 2002) with a 30Gb HD (MK3018GAS, 4200 RPM).

  I want to upgrade this drive with a Toshiba one with 120 GB (MK1234GAX, 5400 RPM). These HDs have the same type of bus, so it should be no problem with that, but how do I know if the ability will be recognized by the BIOS, and if there is no heat problem?

  Thank you for your response.

  Laurent

  Hello

  The heat should t be a problem, but the size of the HARD drive. It s a really huge difference between 30 and 120 GB.
  In my opinion, the BIOS will not recognize the HARD drive, but I can't say for sure
  So I recommend that you test it HARD and please we report the results

  Someone has updated the old 1700-400 Satellite with 80 GB HARD drive, and it works!
  Maybe your 120 GB HARD drive will work also successfully crossed ;) finger

• Satellite 2410-303 - I need a new compatible CD/DVD player

  Hello.

  First of all, I'm new to this forum, I am of the Spain and my English is very bad.

  Well, I have a Satellite 2410-303 with a mod of DC/DVD unit. TEAC DW-224TH-34. This unit broke down. I need a compatible device, or the same, but I have not found (I found one for almost $180 ship more, very expensiveeee for me).

  I need a list of the device compatible with my laptop. In the manual, this information doesn't exits.

  Thank you very much

  Hello

  Well, I checked the manual the user and on the first pages you can find a few displayed records, they are compatible with the laptop:

  TOSHIBA SD-R2212
  Matsu * a UJDA740 *.
  TEAC DW-224TH *.
  (*: any letters or numbers)

  So if you are looking for a player with Google you should find a few online shops or you contact an authorized service provider to get a new drive.

• Need to specification SD TypA Controller for Satellite 2410-303

  Hello

  for the moment, we are working on the QNX driver for SD controller. This device is integrated in my notebook - model Satellite 2410-303.
  SD controller is visible by the o/s as:
  Vendor ID = 1179 h, Toshiba America Information Systems
  Device ID = 805 h, TypA SD controller

  Where can I find the specifications for this controller?

  Kind regards
  Jacek

  Jacek: this is the forum user. To be honest, I don't think that someone can offer you assistance.
  As I see you just Poland. Try to contact the closest to ASP, it. They have access to the database of Toshiba and I hope they can help you.

• Satellite 2410-303: can I play the games of "myst" his unit?

  can someone tell me if I can play the games "myst" on my satellite 2410-303, computer laptop, he got a geforce 420 GB chip in it. the pilot is lvl4-disp dll, version 6.13.0010.2846 (English). I am very new to computers and any help will be appreciated thanks Jackal

  Hello

  Well, as far as I know this device was shipped with a P4 processor 1.6 GHz and it of possible improve memory to 1024 MB. The graphics card has 32 MB of Ram, but I think it will do enough.
  But before you buy the game, you should check the minimum system requirements for this game. Please check some magazines of game for this information.

  Good bye

• On the Satellite 2410-303 CPU upgrade is possible?

  My Satellite 2410-303 has Pentium 4 Mobile 1.7 GHZ processor. I want to improve its Pentium 4 2.8 GHZ mobile processor. I think it's possible because its models superiors faster processor and it's unique difference between them.

  Please, help me in this matter and tell me is it possible?

  Hello

  You will be very happy if someone has good experiences with upgrade CPU on Satellite 2410 but on this forum you can find very nice comments about it. I have founded two of them, but very interesting. Check it out!

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=87488
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=59708

  Good bye

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite 1900-303 cdrom problem

  Hello

  Sorry for my bad English, I'm learning :)

  I have a Satellite 1900-303, windows xp home edition.

  Sometimes, when I try to copy on CD ROM, some, for example, to music whith the multimedia player, trial everything is ok, but in the end... no file :(

  The system error saying:
  El device, \Device\CdRom0, has a blocking Lillies.

  What can I do? Thank you very much

  Sorry, but this error Message is not in English!
  You can try to translate it?

• Satellite S1800-814: startup problem, screen is black

  I know there are several comments here to point out how the black screen at startup. I think my problem is similar, but I need a few more details.

  A year ago, a friend of mine gave me his old laptop, a Satellite 1800-814. I use it mainly as a typewriter and check my email. He could never operate on battery only, longer than for a few seconds, but I've always used it with the connected power cable, no problems. Sometimes it wouldn't start, and I had to unplug the power supply for a while to turn on.

  I was visiting someone and wanted to connect to the Internet. They had this USB wireless modem, that I have it plugged into my Toshiba. During installation, the PC froze, and I had to reboot by pressing the button market for some time. He did restart, but at a standstill. I restarted again, sometimes had it works, sometimes not, and ultimately he entered its current state: with the power cord plugged in, it will start, I'll hear the processor fan (or whatever it is) work and the lights of the battery and the power will be green at the bottom of the keyboard.

  The screen, however, is black, there not all sounds and ceilings and the insert key lights do not react to what whether - they are permanently gone.

  What is happening here? I tried to remove the battery, give it some time and then reinsert, but in vain. I also tried to start it upward with the USB connected modem, no luck there either. What I do have an appointment with the Doc of PC, or can I fix it?

  I have really important documents there. Grateful for any help!

  Your description is quite long, but I'm still confused. You mixed several questions in the description of the problem and there is no stated clear what happens when you press the button walk / stop.

  Power is ON?
  Is there a HARD disk activity?
  You see something on the screen?
  What happens if you use the power supply only (without the battery inside)?

  Sorry, but it is not easy to tell what can be the problem. The best thing you can do is to contact someone with enough experience PC. The person who has the laptop on the desk and try to start this laptop can be more specific about possible problems.

  BTW: Please check this http://support.toshiba-tro.de/KB0/TSD57013H000JR01.htm interesting document