Satellite 2410-303-display flashing, update the BIOS

Similar Questions

• Satellite A60-106: Question about updating the BIOS and the BIOS Flash

  Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

  If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

  Hello

  Sorry, but you question is a bit confusing.
  The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

  The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Satellite L500-1XC - error while updating the BIOS

  Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

  Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
  I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

  Any suggestions?

  Hello

  I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

  On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)

• Satellite 2410-303: can I play the games of "myst" his unit?

  can someone tell me if I can play the games "myst" on my satellite 2410-303, computer laptop, he got a geforce 420 GB chip in it. the pilot is lvl4-disp dll, version 6.13.0010.2846 (English). I am very new to computers and any help will be appreciated thanks Jackal

  Hello

  Well, as far as I know this device was shipped with a P4 processor 1.6 GHz and it of possible improve memory to 1024 MB. The graphics card has 32 MB of Ram, but I think it will do enough.
  But before you buy the game, you should check the minimum system requirements for this game. Please check some magazines of game for this information.

  Good bye

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye

• Satellite A100 - 803 (PSAANE) - Trouble updating the BIOS in Vista

  Hello

  I tried to update the BIOS on my laptop today. After the installation of the new BIOS, restarted the pc and then it showed a black screen with white display text material in the machine.

  In the end, it says something about a corrupt CMOS. She said press F1 to default or F2 for Setup.

  I pressed F1.

  The thing is that I don't know if it worked. I used a program to display the bios version and it seems up to date, but the CMOS thing me freaked out.

  I met all of the planned maneuvers (AC adapter / CC plugged etc.) except in startup mode. I assumed that the boot mode is currently in the standard vista desktop.

  * What is this thing of startup mode? * It's driving me crazy. I searched the forums, google and nothing. How can I get the computer to "boot mode and not recovery mode" as the tutorial says.

  I intend to reinstall the BIOS as soon as I know how to enter in the boot mode.

  I think that this announcement has already answered in this thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=122727#122727

  You're talking about the traditional BIOS update, but the fact is that on the Toshiba driver page you will find ONLY the base BIOS update windows.
  All new BIOS updates are versions of WIN and can be updated only running a Windows operating system.

  In the BIOS, the package should be unzipped everything first, and then an .exe file must be run.

  That s all ;)

• Satellite A-C50-K9K - after updating the BIOS, cooling fan is very loud

  Gas station proposed to update the BIOS. 1.00 to 1.30. After updating the cooling system is 90% of the time. Load the default settings BIOS do not change.

  No backup of the BIOS. Is it possible to download BIOS 1.00 or solve this problem?

  The downgrade of the BIOS is not possible because you n t have the first version of BIOS and even if you get the 1.0 version of BIOS, the BIOS update procedure is not possible because the newer version is already flashed.

  But I recommend you set the method in Windows to optimize power or better management the cooling battery life

  + Control Panel--> Power Options--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Flash or not Flash update the BIOS h8 - 1380t

  Recently purchased HP Pavilion h8 - 1380t Intel Core i7-3280 @ 3.6 GHz - 14 GB DDR3 1600 MHz SDRAM - wind 7 Pro 64-bit.

  Wanted to really install & run Win XP Mode, said installation hardware-assisted virtualization is not enabled in the BIOS. Let me tell you that the BIOS of this machine is as lame as I've seen in 30 years of doing this kind of things. However, there is no menu item for the filming on the virtualization of hardware support and no revision number or date. If I remember it's Megatrends (?) American. Two sessions with HP Technical Support gave rise to "maybe" updting BIOS would provide the H - A virtualization menu item. I downloaded the update available sp56214.exe. Anyone think it's a good idea to update the BIOS? Does anyone have Win XP Mode running on a similar HP desktop computer? And what is the key CTRL-I to enter the flash installation when booting? Is this a different configuration of the BIOS? I have not tried, but I have little time wil.

  You are the very welcome.

  Yes, this is my opinon (if it's not broken, don't fix) unless after reading the BIOS release notes there are something you just has to.

  If there is a way you can Flash the BIOS in the BACK, then I'd be more liberal in my thoughts, but these basic windows flashes... I've read too many horror stories on this forum about failed BIOS flashes.

  Just for fun, do a search on "flash BIOS failure" and see many threads pop up.

  Paul

• Satellite P100 PSPAD: could not update the BIOS 3.8 and a poor video performance

  Hello

  I have a video performance of bad quality on my machine as well as the fan power of the issues.

  To add to my frustration the WinPhlash program included in the BIOS version 3.8 empty out trying to flash which gives a PHLASHNT. SYS failed to load the message with different error codes (codes 5 and 147 depending if I launch the exe, as it is extracted from the ZIP, or run the files extracted independently).

  I checked all permissionings on the record and I definitely full control - but still a generic message of "check your accounts, if you do not have permissions please log in again!" is displayed.

  help with my problem of BIOS would be apreciated.

  [Edited by: admin on July 6, 2007 11:10]

  Hello

  but as the average it s absolutely the safest office upgrade firmware on at the level of the BACK. Or at least using the UBCD4Win, which is a beautiful cd live windows for maintenance.

  Welcome them

• Satellite A100-PSAAN: can I update the Bios of PSAA8 model?

  Can I put the Bios of A100-PSAA8 on a model A100-PSAAN?
  REASON
  I get the message that there is error of TPM secure entering (missing or disabled), hollow, I have this TPM in the Security section of the Bios, but I can't change.

  Please ADVICE

  NO, you can t!

  The bad BIOS or bad BIOS update procedure can damage the motherboard.

  I read you first thread and it seems like you get the TPM message because you downgraded the OS from Vista to XP!

• Satellite L40 - not possible to update the Bios of 1.70 to 5.10

  Hello.

  I brought a laptop Toshiba L40. It came with Windows Vista and Bios 1.70 instaled (this Bios is dedicated to Vista only). I need to install Windows XP, but first of all, I have to install the 5.10 Bios (the bios is dedicated to XP). But when I try to install the 5.10 Bios, the WinFlash tells me that I have a Bios more recent instaled, and so it won't let me install the 5.10 Bios...

  Can someone help me, please? Theres a way to install the 5.10 Bios?

  Concerning

  PS: I am Portuguese, Yes, sorry if my English is not perfect, and a repetitive litle, I hope you understand it...

  * EDIT: it's the 1.70 BIOS, not 7.10... Sorry

  Post edited by: Toaki

  I didn t see all L40 with a BIOS 7.10.
  Which series Satellite L40 is?

  Could you please put the full name?
  Thank you

• Satellite 2410-303-help with replacing the LCD screen

  Hello
  My screen is dead and must be replaced. Can someone tell me where I can get a replacement and at what price? I live in Mauritius and cannot get spare here.
  Thank you mnay
  Jawa

  Hi Jawa

  In my opinion there is not a lot of options. You can order parts by authorized service partners or order it from some independent PC shop. Check if you can find a partner in your countries, or maybe someone else (they can send you everything you need to). Another way Google a little bit and I'm sure you'll find someone who can send you a new LCD screen for your laptop.

  On the price I can't tell you much because we walked free and the price is different from one country to the other.

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them