Satellite 4080 freezes during use. Event ID 5 - port i/o address not

I have a Satellite 4080 running windows xp sp2 makes it reasonably well. It is used only for basic word processing and Office Automation. Laptop freezes during use and should be set out & back again. In case the Viewer is an event id number 5 the ACPI BIOS attempts to write an unauthorized i/o port address. This is due to the problem with the freezing of the laptop? Microsoft as useful suggest that never contact the editor of the BIOS on possibly updating the BIOS. Any suggestion would be appreciated.

Hello, Robert

The update of the BIOS you can find on http://www.toshiba-tro.de/subpage/bios.html but check it please the MORE INFORMATION on the right side.

I don't know if this will help solve the problem, but you can try. Please be careful with the BIOS update and read the instructions first.

Tags: Toshiba

Similar Questions

Messages.app (and safari.app) freeze during use.

Hello

I updated a machine x 2 weeks from 10.10.4 in 10.11.2. Refresh, I noticed an abnormal amount of horror while using Safari and Message. Overview of the community of Apple would be appreciated!

EtreCheck version: 2.6.6 (226)

Report generated on 05/01/16 15:39

Time 02:41

Download EtreCheck from http://etrecheck.com

Click on the links [click for support] to help with non-Apple products.

Click on the links [click for more details] for more information on this line.

Ignore the known failures of Apple: disabled

Hardware Information: (Does that mean?)

MacBook Pro (retina, 13 inches, early 2015)

[Click for plug technique]

[Click here for the User Guide]

MacBook Pro - model: MacBookPro12, 1

1 3.1 GHz Intel Core i7 CPU: 2 strands

16 GB RAM not extensible

BANK 0/DIMM0

8 GB DDR3-1867 MHz ok

BANK 1/DIMM0

8 GB DDR3-1867 MHz ok

Bluetooth: Good - transfer/Airdrop2 taken in charge

Wireless: en0: 802.11 a/b/g/n/ac

Battery: Health = Normal - Cycle count = 44 - SN = D865205W070FY5GAS

Video information: (Does that mean?)

Intel Iris 6100 graphics card

Color LCD 2560 x 1600

Thunderbolt Display 2560 x 1440

Software: (Does that mean?)

OS X El Capitan 10.11.2 15 c (50) - since the start time: about 6 days

Disc information: (Does that mean?)

SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

EFI (disk0s1) : 210 MB

HD (disk0s3) [recovery] recovery: 650 MB

Macintosh HD (disk 1) /: 999,33 go-go (726,09 free)

Storage of carrots: disk0s2 999.70 GB Online

USB information: (Does that mean?)

Broadcom Corp. Bluetooth USB host controller.

Logitech USB receiver

Apple Inc. FaceTime HD camera (display)

Apple Inc. Apple Thunderbolt Display

Apple Inc. Audio display

Lightning information: (Does that mean?)

Apple Inc. Thunderbolt_bus.

Thunderbolt Inc. Apple display.

Configuration files: (Does that mean?)

/ etc/sudoers, 1244, file size but expected 2299

Guardian: (Does that mean?)

Mac App Store and identified developers

Kernel extensions: (Does that mean?)

/Applications/zoom.us.app

zoom.us.ZoomAudioDevice [no charge] (1.1 - 10.8 SDK) [click for support]

/ Library/Extensions

[loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]

[loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]

[no charge] foo.tap (1.0) [click for support]

[no charge] foo.Tun (1.0) [click for support]

/ System/Library/Extensions

com [no charge]. SMSC.driver.LAN7500 (2.0.2) [click to support]

com.Cisco.NKE.IPSec [no charge] (2.0.3) [click for support]

[no charge] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [click for support]

com.joshuawise.kexts.HoRNDIS [no charge] (6 - SDK 10.0) [click for support]

Startup items: (Does that mean?)

CiscoVPN: Path: / System/Library/StartupItems/CiscoVPN

TAP: path: / Library/StartupItems/tap

Tun: path: / Library/StartupItems/tun

Startup items are obsolete in OS X Yosemite

Launch system officers: (Does that mean?)

[loading] com.apple.MRTa.plist -invalid signature!

Launch system demons: (Does that mean?)

[loading] com.apple.FileSyncAgent.sshd.plist -no signature!

[loading] com.apple.MRTd.plist -invalid signature!

[loading] com.apple.airplaydiagnostics.server.mac.plist -/AppleInternal/Applications/AirPlayDiagnostics.app/Contents/Resources/AirPlayDi agnosticsServer: Executable not found!

[loading] com.apple.configureLocalKDC.plist -no signature!

[loading] com.apple.efax.plist -no signature!

[loading] com.apple.emlog.plist -no signature!

[loading] com.apple.gkreport.plist -no signature!

[loading] com.apple.locate.plist -no signature!

[failure] com.apple.logd.plist [click for more information]

[loading] org.apache.httpd.plist -no signature!

[operation] org.cups.cupsd.plist -invalid signature!

[loading] org.net- snmp.snmpd.plist -no signature!

[operation] org.ntp.ntpd.plist -no signature!

[loading] org.postfix.newaliases.plist -no signature!

[loading] ssh.plist -no signature!

Launch officers: (Does that mean?)

[loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

[operation] com.flipvideo.FlipShare.AutoRun.plist [click to support]

[failure] com.p5sys.jumpdesktop.agent.plist [click to support]

[operation] com.sophos.uiserver.plist [click to support]

Launch demons: (Does that mean?)

[loading] com.adobe.fpsaud.plist [click to support]

[operation] com.code42.service.FinderExtensionInjector.plist [click to support]

[operation] com.crashplan.engine.plist [click to support]

[operation] com.fitbit.galileod.plist [click to support]

[operation] com.flipvideo.FlipShareServer.launchd.plist [click to support]

[loading] com.microsoft.office.licensing.helper.plist [click to support]

[failure] com.p5sys.jumpdesktop.service.plist [click to support]

[operation] com.sophos.common.servicemanager.plist [click to support]

User launch officers: (Does that mean?)

[loading] com.adobe.ARM. [...]. plist [click for support]

[loading] com.adobe.ARM. [...]. plist [click for support]

[failure] com.code42.SharePlan.plist [click to support]

[operation] com.code42.service.Service.plist [click to support]

[loading] com.google.keystone.agent.plist [click to support]

[failure] com.zeobit.MacKeeper.Helper.plist [click to support]

Items in user login: (Does that mean?)

E-mail application (/ Applications/Mail.app)

Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

CrashPlan menu bar of Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)

Other applications: (Does that mean?)

com.adobe.Reader.46752 [loading]

[ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

[ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.AdobeReader

[ongoing] com.Apple.XPC.launchd.oneshot.0x1000000c.Microsoft Excel

[ongoing] com.Apple.XPC.launchd.oneshot.0x1000000d.EvernoteHelper

[ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.Microsoft PowerPoint

[ongoing] com.citrixonline.g2ax.customer.141472

[ongoing] com.code42.b42menuextra.95392

[ongoing] com.etresoft.EtreCheck.144992

[ongoing] com.evernote.Evernote.48352

com.microsoft.Word.62752 [loading]

[ongoing] com.Microsoft.AutoUpdate.FBA.94432

[ongoing] com.Sophos.AutoUpdate

[ongoing] com.Sophos.Configuration

[ongoing] com.Sophos.InterCheck

[ongoing] com.Sophos.notification

[ongoing] com.Sophos.scan

[ongoing] com.Sophos.sxld

[ongoing] com.Sophos.webd

Plug-ins Internet: (Does that mean?)

Default browser: Version: 601 - SDK 10.11

OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - 10.6 SDK [click for support]

FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

Silverlight: Version: 5.1.40416.0 - 10.6 SDK [click for support]

QuickTime Plugin: Version: 7.7.3

Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

iPhotoPhotocast: Version: 7.0

SharePointBrowserPlugin: Version: 14.5.9 - 10.6 SDK [click for support]

AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

ViewRightWebPlayer: Version: 3.5.0.0 [click for support]

User Plug-ins internet: (Does that mean?)

WebEx64: Version: 1.0 - 10.6 SDK [click for support]

BrowserPlus_2.9.8: Version: 2.9.8 [click for support]

CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

ZoomUsPlugIn: Version: 3.5.27367.0922 - 10.10 SDK [click for support]

Safari extensions: (Does that mean?)

jbsearch

3rd party preference panes: (Does that mean?)

3ivx MPEG-4 [click to support]

Flash Player [click for support]

Time Machine: (Does that mean?)

Automatic backup: YES

Volumes to back up:

Macintosh HD: Disc size: 999,33 GB disc used: 273,24 GB

Destinations:

[Network] data

Total size: TB 3.00

Total number of backups: 82

An older backup: 21/08/14, 19:49

Last backup: 30/12/15, 08:39

Size of backup drive: Excellent

Backup TB 3.00 size > (disk size 999,33 GB X 3)

Top of page process CPU: (Does that mean?)

100% com.apple.WebKit.Plugin.64

20% WindowServer

Customer GoToAssist 11%

3% kernel_task

1% fontd

Top of page process of memory: (Does that mean?)

1.42 GB kernel_task

1.02 GB mail

EverNote 688 MB

573 MB CrashPlanService

Softwareupdated 475 MB

Virtual memory information: (Does that mean?)

2.60 GB of free RAM

13 h 00 GB used RAM (5.20 GB being cached)

Used Swap 0 B

Diagnostic information: (Does that mean?)

January 5, 2016, 08:52:24 /Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_2016-01-05-085224_[r edacted].cpu_resource.diag [click for more information]

January 5, 2016, 03:03:30 /Library/Logs/DiagnosticReports/CrashPlanService_2016-01-05-030330_[redacted].c pu_resource.diag [click for more information]

January 4, 2016, 06:00:51 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-01-04-180051_ [redact ed] .crash

1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

There are ways to back up a computer that is not fully functional. Ask if you need advice.

3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

4. here is a general summary of what you need to do, if you decide to go forward:

☞ Copy a particular line of text to the Clipboard.

☞ Paste into the window to another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Stick the results, which will be copied automatically, in a response on this page.

These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

8. start the Terminal application integrated in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:
```
    Test started
```
```
        Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec
```
```
    The test results are on the Clipboard.
```
```
    Please close this window.
```
The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

11. when the test is completed, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

13. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

14. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

My computer freezes during use

My computer hangs running, he comes up with what I am running. How can I fix

Hello

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

I hope this helps and happy holidays!

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Firefox has started to freeze on the opening and hangs / freezes frequently during use.

Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.
I tried refreshing and disabling, but to no avail hardware acceleration.
Now it seems to freeze on opening and takes a minute or two to become sensitive, or not at all.
When I look into during a freezing Task Manager, I see the Firefox process use 35 to 50% of memory [I have 8GB, 12GB, and 16GB] and up to 50% of the CPU resources.
Everything was fine until the last two weeks.
In addition, last month, I noticed an almost permanent error on the status bar message - ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

Satellite A100-233 - freezes during the update of the BIOS

I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

OS: Windows XP Pro SP3

And when I tried the BIOS update and load the new BIOS: ok
Analyze the compatibility of old and new BIOS: ok
Read old BIOSES: ok
Save the old BIOS to the backup file: ok
New Flash start cant BIOS and 1-2 min after the gel cell

I solved.

but really not funny...

If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

Post edited by: jadefox

Hello

I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
http://EU.computers.Toshiba-Europe.com > support & downloads

Welcome them

XP freeze during periods of rest during use

Hi I have a problem with my pc, I'm not sure if it's the pc or my software, as follows: if I start my pc and then not use it for about 10 minutes, he invariably freezes requiring a reboot. This can also occur during use, which can be a pain if things are not registered, I have now all all save a few minutes. I use XP Professional and office 2003, plus I have Spysweeper (which can be a real pain, most of the time) and Norton 360. Everything is up-to-date and I ran several defrags and cleans registry, but does not, now I lose what little hair I left, I hope someone can help with this.

Thank you.

Hope Springs

Wednesday, July 21, 2010, 14:43:39 + 0000, Hope Springs wrote:

Hi I have a problem with my pc, I'm not sure if it's the pc or my software, as follows: if I start my pc and then not use it for about 10 minutes, he invariably freezes requiring a reboot. This can also occur during use, which can be a pain if things are not registered, I have now all all save a few minutes. I use XP Professional and office 2003, plus I have Spysweeper (which can be a real pain, most of the time) and Norton 360.

I certainly didn't know that you are infected with malware, but you
run some of the poorest security software available, so I
certainly suspected.

For an anti-virus program, I recommend eSet NOD32, if you're ready
to pay for it. If you want a free anti-virus, I recommend one of the
three of the following:

Avira
Avast
Microsoft Security Essentials

You also need anti-spyware software. I recommend that you download and
(both freeware) to install MalwareBytes AntiMalware and
SuperAntiSpyware.

Everything is up-to-date and I ran several defrags

Ok.

and cleans up registry

Ugh! Do not do this!

Registry cleaning programs are all snake oil. Cleaning of the
registration is not necessary and is dangerous. Let alone register and
do not use any registry cleaner. Despite what many people think, and
What software record cleaning suppliers are trying to convince you,
have unused registry entries is not really make you hurt.
The risk of a serious problem caused by a registry cleaner by mistake
delete an entry you need is much greater than any potential benefit
It can have.
Read http://www.edbott.com/weblog/archives/000643.html

And also
http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

Let me stress that neither me nor anyone else who warns the
use of registry cleaners never said that they always cause
problems. If they have always caused problems, they would disappear from
the market almost immediately. Many people have used a registry
cleaner and never had a problem with it.

The problem with a registry cleaner is that it carries with it
the risk of a significant problem. And since there is no
benefits of using a registry cleaner, running that risk is a very bad
good deal.

Ken Blake

Satellite A200 freezes / restarts randomly on startup

Hello

I have Toshiba Satellite A200, Windows Vista Home Premium SP2 6.0.6002.
Intel (r) Core (TM) 2 Duo CPU T5450 at 1.66 GHz
Video ATI Mobility Radeon HD 2400 version = 8.380.0.0
Audio version of Realtek High Definition Audio = 6.0.1.5406
Network Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller version = 10.0.4.3
Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.5.0.32

For the two weeks... my laptop randomly freezes / restarts... especially when it is started for the first time in the day OR after being in standby / hibernation of State for a few hours.
Sometimes it gets stuck before we get to the login screen... sometimes shortly after... no certain activity seems to be related to this gel. And it's not freezing all the time... sometimes it restarts too. No blue screen.

No new software installed, except regular updates of windows. No conflict in the device driver. I checked the website of toshiba for the latest drivers. BIOS had a newer version... So I installed which (2.5). But the problem has not disappeared.

When the computer reboots, it works fine... I'm not able to find something to worry about in the event viewer. Start logging also came not to the top with a few errors. I also disabled the option restart automatically.

Windows partition was low on space... only 6 GB left of allotted 40 GB... so I thought to backup and install from scratch... do that... all the updates that are installed during the next days... but my laptop is back to the same State. One thing I notice, is that now it takes longer after starting (and then restart) to connect to the wireless router. But this isn't a problem.

Microsoft Fix It didn't help either... am looking for help to identify the cause and resolve it.

Is there a conflict somewhere which surfaces while system is booting high / shortly after startup?

Thank you in advance.

> How we can say is that there is nothing wrong with the equipment? What else can a check?
The new installation of the operating system has not helped. Right?
So for me it looks like hardware related issue.
I think the disk HARD or RAM (memory)

The HARD drive can be easily verified. Download the drive diagnostic tool called HARD: Drive Fitness Test
It s freeware tool and it allows you to scan the HARD drive and get details on possible malfunction.

The diagnosis of RAM can be done easily. Of course, there are tools like memtest86 + and similar, but in my experience the results of the analysis are not always 100% right
So, in that these cases it s always a good idea to test the laptop using new tested s RAM

Satellite A660 crashes during games and recovery

I have problem with my Toshiba Satellite A660. Sometimes when I play it freezes and I can't even move the pointer that all freeze them then I have to stop with force.
Once it freezes during a restore and that what do me worried about would be a secondary problem (amount of money).
I tried to take it to one that he calls himself a Toshiba service company and they told me that the problem is solved, but he didn't.

So I hope that everything would be help me I m in a bad situation here.

Hello

I understand your situation but to be honest, I put t know how to help you.
I put t know what that solved the service and what they did with your laptop, but what you can do is to install the OS by using the recovery image (on DVD or HARD drive) and to monitor closely what will happen in the future.

While gaming, don't forget your laptop is placed on the desk and the cooling fans should not be stuck with a few Pater, books or anything else. before you start the game go portable high performance power plan and check that cooling in this plan of the power method is set to the maximum level.

Tecra S2 freezes during labor

Hello

We bought some Tecra S2 for our company and installed with Windows XP (not the recovery image). Unfortunately, some of them from freezing during labor. There is nothing you can do except one thing, you know what I mean.
It happens all the time and he doesn´t plan including the application in use. It happens even to the logon screen.

We have already reinstalled the notebooks and sent back to toshiba, but they couldn t find hardware problems. but the error persists.

does anyone have an idea what we could try...

THX

Hello

I'm also owner of laptop Tecra. Unfortunately mine isn't the newest one. AFAIK Tecra's big deal machine and always pre-installed with Windows XP Home edition Professional. Is there a special reason for a clean installation of Windows XP Home edition?

Does the problem occur with the original installation of Windows XP Home edition? Are some of them connected to external devices? As you know that there are several reasons why this happen.

BR

Mousepad satellite L850 freezes

My mousepad Satellite L850 freezes all the time whenever I do a double finger scroll. In order to make it work, I have to restart the computer. The mouse driver said that he is up to date

Is - what the touchpad freezes using only this feature double finger or even using other features of the touchpad?

Have you changed anything in the configuration of your system (System change)?

Currently it is difficult to say what is causing your problem.

You can try uninstalling the software/driver preinstalled touchpad and might try to install the latest touchpad driver:
http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-20130924162209.zip

It s the v15.3.38.2 of the Synaptics driver

Luxor adventure freezes during playback

Original title: luxor adventure freezes during the game and can't get out of Access violation 05370BC and 6CF1E828Game address will freeze

access violation and read the address 6CF1E828. To go out I have to stop down

Hello

1. which version of the Windows operating system do you use?

2. What is the exact error message you get?

Perform the steps in the following links and check:

Game performance may be poor on a Windows XP-based computer that uses a dual-core processor

Windows Vista - the problems of the game performance

Windows 7 - game performance issues

I hope this helps.

2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over. I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518. There is no error message but a beep at startup upward. I ran Windows repair program 'Start' who did a restore without success. The problem occurs even in Safe Mode.

Does anyone have a guess as to what is the diagnosis? Thank you.

Hello

Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
cables on both ends where possible).

As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
It remains under tension if you start from the disc of Vista?

-----------------------------------------------------------------

Look in the Event Viewer to see if something is reported on these reboots.

http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Freezes during "synchronization of folders.

Freezes during "synchronization of folders. What should I do to get it to not automatically synchronize? Sometimes it happens frequently and sometimes it happens during a few hours work session. I have to turn off and then turn on make it work again once it starts synchronization of the computer.

Hi Rosie Shannon,.

· Where do you get this popup?

· Have you noticed what happens when you work with a program or a particular application?

Check the event viewer for more information, you can check the link below: link: what are the information in the event logs? (Event Viewer): http://windows.microsoft.com/en-us/windows-vista/What-information-appears-in-event-logs-Event-Viewer

With regard to:

Samhrutha G S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

PC freezing during activities such as online games

Hello

I have Windows 7 and I had problems with my PC freezing during activities such as online game. No message is displayed, but my computer freezes for up to 5 minutes. I looked for a solution for a long time and I was wondering if I could receive some help here to find the cause of the issue, but also a way to fix.

Hello

If your computer came with Windows 7 system OEM manufacturer can sell you cheap DVD since
you already have windows.

See also these:

If you need to repair disks - these help repair Windows not re-install.
Often, these records will help when the OEM recovery disk does not work.

Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs. (It can be done on any computer running XP,
Vista or Windows 7 which has a CD/DVD burner).
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

How create a Windows 7 system - free repair disc (must be made on a
Windows 7 computer running the same 32-bit or 64-bit).
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

An installation disc is possible also to use for repair. Of course you would
Use your own COST (product key).

How to: What are my options for Windows 7 reinstall media?
http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

Welcome to the recovery of Microsoft software
http://www.Microsoft.com/en-us/software-recovery

See MVP Andre Da Costa message in this thread.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

Rob - SpiritX

Audition 2.0 freezes during playback and recording

Hello
Audition 2.0 has started to freeze for a moment during playback if you change a file. It happens almost every time I touched the game after the removal of a segment of the file. It also occasionally freezes during recording, but nowhere near as often as when editing. This problem has appeared recently.
Audition 2.0
Windows 10 home
AMD Phenom 2.70 GHz
16.0 GB
64 bit
Any suggestions?
Thank you.

Jay Newell wrote:

As I was playing around with it tonight, I noticed the problem only happens when I'm working on the @44 recorded files. 1 K and not on record @48 files K (these are the rates only 2 I save to). Offers no clue?

Oh, yes--but you might not like it.

If it happens to a sample rate it is quite possible that the operating system (not hearing) is resampling, and it takes awhile to turn on. You probably need to do is set the native speed for your audio device on the same as the file that you are playing at the hearing. And if you need to change that at some point, you need to change the default values of the audio device again more... which is a pain.

The absolute best solution for this is to use an external audio device, which can bypass it completely.

Satellite 4080 freezes during use. Event ID 5 - port i/o address not

Similar Questions

Maybe you are looking for