Ricambi DELL Cheetah 15K.7 SAS 300 GB [GRO]

Similar Questions

• Adding a new 3rd SAS 300 GB disk for ESX 3.5

  What I have:

  1 Dell R160 - ESX 3.5 Server

  2. two hard disks 300 GB SAS - RAID 0 (I need not redundancy)

  3. 2 300 GB drives form 1 Virtual Disk capacity VD0 about 580 GB

  Requirement:

  Now, I bought a new SAS 300 GB HD which I want to add to the already existing ESX configuration. I want this 300 GB for the 2nd (MON) datastore again so that I can create a few more VMs on this data store. I don't want to re - install ESX installation complete (if possible)

  What I tried:

  1. a way that I can create a new ramdisk on this 3rd 300 GB SAS HD so that I can add it to the ESX via VM Infrastructure Client data store. -Does not work: (.) Also simple plug-and-play of the drive does not work as the ESX is not able to scan the HD if I simply just add it on the drive and run ESX

  I am a newbie so please let me know if you guys need more info to solve my prob.

  Thank you.

  Vik

  SAS - Ready 300

  This drive must be online.

  Create a new VD using RAID0

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Brain SAS by PE2950 [GRO]

  Salve,

  Dove posso acquistare in Dell 2 brain nuovi (Seagate Cheetah 15K.5 ST3146855SS by UN PE2950 Server?

  Grazie by attenzione.

  Ok. Devo risolvere he problema. You can bring soluzione Quale? Sostituzione dei brain o riparazione degli same?

• HDD SAS 300 GB switchable to hot sostitutivo by PE T320 fuori co [DS]

  Buongiorno, avrei need della quotazione by a HDD sostitutivo su UN Poweredge T320 fuori co.

  He guasto disco e:

  Parte Qta description

  G937K 4 SCREW 6-32 X 225, PHILLIPS, FLAT, BLACK HEAD
  F617N HARD DRIVE 1, 300G, SAS6, 15K, 3.5, S - EG, E/C
  FM833 1 label, print on demand, Hard Drive, RECTANGULAR
  F238F 1 ASSEMBLY, CARRIER, HDD, SAS-SATAU, 3.5

  e fa parte di a RAID-10 con 4 HDD, raid controller H310 array.

  Come posso avere farvi it tag by verification service?

  Thanks, RG

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione (intervento o):

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (o codice client o number order recent):

  Address 2:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA:

  Speaking saluti

  Manual

• Reference dell ATI Mobility Radeon X 300 Dell Inspiron 9300 video bios update

  Is it possible to update the video bios with out having a battery installed on your laptop?  My dell battery died a few months ago, so I've been running with it.  I Dj and video mix with this laptop and the software that I use in video playback (Win Amp, WMP, RealPlayer etc) sometimes becomes unstable.  With my computer experience, I have yet to find a work around.

  Any suggestions?

  TIA

  SpYdeR

  
  

• ESX 3.5 will recognize additional HDs on PowerEdge 2900 (is not a member of a RAID 1 configuration)?

  Hello gurus/VM-masters

  I am still a novice in the VM world: 3

  The installation program:

  Dell PowerEdge 2900 running VMware ESX Server 3i 3.5.0 build-153875

  Installation of two hard disks in RAID 1

  Only one store of data in RAID1

  The question:

  I have an extra hard drive that I want to add. http://Cheetah 15K.6, SAS (Serial Attached SCSI)

  I was wondering if there where it is possible to add additional hard drive and create a new data store to add new virtual machines on it?

  ESX will recognize it as additional storage?

  Is it bad/mess with existing RAID1 configuration?

  Or is it simple, plug-in HD

  Thank you!

  RAID 0 - a definition of tolerance drive no fault, in this case a single PIN.

  Many raid controllers able technical force you to set the drive as a feature available on the controller, before the operating system can see it, in this case a drive would give a raid 0 LUN set on the controller.

  Your controller will accept it is submitted or you need to take the material down to set it. Sometimes, this feature is available via an interface ILOM (Integrated Light Out Manager) of the server allowing the definition without an outtage.

  http://blog.laspina.ca/

  vExpert 2009

• EQL PS6010 online and I want to upgrade the capacity of the disk but original Dell drive are not available, it is possible to replace it with the original brand of Seagate.

  Hello

  One of my largest clients use a PS6010XV storage in production for 3 years. It is equipped with 8 disks SAS 600 GB drive HARD 15'000 rpm and shortly it will be out of space. He ask me full fill the table with hard 16 600 GB.

  My sales representative Dell told me that this kind of upgrade is not possible, the 600GB 15,000 rpm SAS drives is not available...

  My client is very upset by this situation and I'm trying to find another solution.

  Is it possible fill completes the picture with the original disc Seagate Cheetah 15K 3.5 "600 GB SAS 6 GB/s 24 x 7, type ST3600057SS instead of the original Dell disks?

  I can see the Dell drive (P/N 0944832 - 01) are Seagate brand and type is exactly the same.

  Kind eyes and waiting for your response

  Christophe

  Hello

  No, because it is custom firmware on the brand of Dell disks.  The EQL firmware will be search and reject non Dell/EQL brand discs.  Do not add any disk brand would also void the warranty.

  Kind regards

• Request request by upgrade Dell T710 [FG]

  Buongiorno,

  richiedo request by number of Service Dell T710 for improvement:

  N ° 4 brain SAS o 600 gb 10 k 15 k

  oppure

  N ° 6 brain SAS 300 gb 15K

  Upgrade of Cache controller H700 da 512 a1GB

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the della spedizione parte o intervento del tecnico on site:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Fabio

• SAS Raid 15 k on Raid SSD HDD

  Hello. I have a Dell PowerEdge T310 with SAS 6/iR Server adapt including two 300 GB hard SAS 15 k Raid 1 drives. I just bought two 400 GB of SSD SAS Enterprise grade drives. I'm looking to replace hard drives with SSDS. What is the easy/more fastest way to get there?

  Can I delete a hard drive and leave the table rebuild on the SSD and then finished on the first SSD, repeat for the second?

  Backup/restore. You cannot mix SAS/SATA or SSD/HDD in a table.

• Quotazione ricambi fuori co [CF]

  Buongiorno,

  avrei need di avere una quotazione by dei di fuori co, in particular server components:

  Alimentatore per server POWERVAULT NX300 service tag: Bxxxx

  RAM 16 GB con compatibility: POWEREDGE R520, serial number: 5xxxxx

  RAM 16 GB con compatibility: POWEREDGE R710, serial number: Jxxxxxx

  Hard drive 600 GB 15 k sas 3.5 compatibile con: POWERVAULT MD 3220I. Hard disk in questioned fa parte di una configuazione raid con dei brain Cheetah 15k.7 model n ° ST3600057SS.

  Grazie anticipatamente.

  the sto contattando by mail.

• iSCSI and Fibre Channel on the Dell PowerVault MD3000 SAN shaerd with 2 physical servers

  Hi all

  I'm doing new virtualization technologies work in my office for assistance:

  2 x Dell PowerEDGE 2950 III each installed with iSCSI next accessing the SAN controller

  1 x Dell PowerVault MD3000 (10 x 300 GB 15 k rpm SAS)

  The

  VMWare ESXi is installed in an internal USB to load 4 x virtual machines which is

  under SOLARIS (using project, houses, SAMBA file server and)

  Source code repository and compile the source code of the project Build

  Server too.)

  5 x Windows Server 2003 which perform as Apache Tomcat application server.

  And

  I wonder if it has performance benefits in the application of the

  Shared SAN for these two physical server via iSCSI in contrast with

  Fiber Channel.

  I am aware that CF is faster and more expensive, but in this case, I won t run a VM with DB server on it.

  must

  I enter the path to have iSCSI or stick with the given FC

  the SAN runs on 15 k rpm SAS used by 2 ESXi server.

  Please let us know of a reflection regarding this configuration.

  Thank you

  Usually, you take NIC 1 gb connections available on your host and configure them as such.

  2 network cards go to the San, most of the time that it is actually two networks with different subnets.

  1 network card next LAN

  1 network card for the management

  We only use three network cards currently on our guests, 2 for San and the other for management and lan. We use two switches dedicated to dedicated networks dual iSCSI san. This allows to easily add additional hosts in the future.

  You get to decide a bit, but the double san network is pretty much a given. You can do all this of course with the VLANs as well. We use the switches unmanaged yet in our Organization.

  PS: Passing path recommended is to have completely isolated storage of the LAN network / network of the user.

• SERVER DELL R710 - REQUEST OFFER BY HD [EC]

  Buongiorno, avrei need di una offer by price dn.3 hd

  ST3600057SS HD Sas2 Cheetah 15K.7 600 GB 15000 rpm

  MI could dare make su come fare? Grazie.

  .

• Which cable Mini SAS to PE T410?

  Hi all!

  I have a T410 (six 3.5 "LFF-exchangeable hot racks) EP that came with archaic PERC 6i controller. I want to replace this controller with something more recent like an Adaptec 6805 or a H700/710 Dell who operate mini-SAS SFF-8087 connectors, but I fight with the SAS cables.

  I tried with a few generic standard MINI-SAS cable Mini SAS (Foxconn) which for SAS has but for SAS B causes an error message ("storage SAS B cable is not connected or is loose."). Swapping the cables does not move the error, and cables work fine in another server (HP) so I guess I need a special cable from Dell to avoid the error.

  However, since Dell has gone to the extreme to discover the correct references such as diifcult as possible, my question to the people here, is if anyone knows what Dell SAS cables work properly in the T410 and what are the part numbers.

  Any ideas?

  Hello

  I'm not aware of what owner with our SAS cables. I used generic cables on the H700 to my personal study. This is the cable for our cables reference numbers:

  Elementary school: M400M
  High school: P215M

  Thank you

• Reference Dell T300 RAID 1 broken by the firmware update

  Hello

  We have a Dell T300 with the SAS 6/iR adapter.

  We have a RAID1 with 2 x 3 TB drives (visible only 2 TB).

  I have updated the firmware on the SAS adapter to the latest version available here:

  

  and now the RAID 1 has disappeared!

  We have a lot of important data on this virtual drive so any help would be appreciated.

  Thank you!

  Jerry.

  Hi Josh,.

  Thanks for getting back to me. The physical connections and the disks were good and they appeared in the update controller RAID configuration. But the virtual drive RAID1 had disappeared.

  I solved the problem by downgrading to an earlier version of the firmware.

  If I had read the README of the first firmware upgrade page completely, I would have noticed:

  The migration of the SAS 6/iR controllers PERC6 controller RAID Volumes is only supported for volumes created originally on 6/iR controllers SAS running review FW 00.25.47.00 or later version.

  I was able to locate a FW version 00.20.48 here.

  The executable flash.bat refused to downgrade the FW version

  However, looking at the .bat files, I could see that flash.bat called xflash.bat called sasflash.exe which is a LSI utility to upgrade the firmware of the card.

  I found an old manual with the arguments that sasflash.exe take here and use the switch - fwdown to wipe the card and firmware downgrade.

  When the server has started upward the virtual drive was back. Phew!

  Guess I'll read the Readme next time?

  Thank you for your attention,

  Jerry.

• Impossible to detect that deployment of OS T630 SAS disks.

  I just bought the T630 and I'm having some trouble detection of hard disks during the deployment of the operating system. Any guidance would be greatly appreciated.

  The material is as follows:

  • Adapter H730 pole
  • Physical disks: x 2 SAS 300 GB; x 3 SAS 500 GB
  • Configuring RAID: RAID 1 (778 GB x 2) - designated for my OS (Win 2008 R2)
  • RAID 5 (465 GB x 3) - designated for the storage of data.

  I'm starting in the USB bootable flash drive BIOS mode (which works as I loaded the operating system on a test pc) and try to make the lifecycle controller operating system deployment.

  It comes after that Installer loads the files I can't see/detect the SAS drives in the configuration of the RAID above.
  I broke the mirror and re configured my virtual disk and initialized readers (Status: on line/loan), but are still unable to see them!

  I need a driver for the pole H730 controller so that the windows installation see the SAS drives? If yes how to deploy the drivers?

  Please notify.

  Kind regards

  DAXimusTT

  Yes, you do. Download and run to extract files, then put the files on a flash drive. When Windows finds no drives, click the drivers load and navigate to the location with the drivers.