Satellite 4080 - keys keyboard not typing letters, but orders!

Similar Questions

• Keyboard not typing letters

  I can't get my keyboard to type letters, where are my keys to numbers. They share the same keys. How can I change back to letters only.

  Hi dscarbs,

  I guess that it is a laptop? The number/letter combination is generally enabled or disabled via a key called "FN". See if you have a FN key and tap it to see if your keyboard back to normal. You may have inadvertently, you press the button while using the keyboard.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Wireless desktop 3000. Mouse is often rough and keyboard not typing letters. Do not respond.

  Hello.

  A few months ago, I bought a 3000 Microsoft wireless desktop computer. I finally opened it and started using it and am wireless. So far it was not pleasant to use.

  If it worked all the time, it would be great. I installed the drivers from the dvd, and it sucks to use.

  Are there tips to make the experience more pleasant and as precise as possible wireless? The batteries are new. I'm usin what came in the box.

  If I have to keep going back and adding letters that do not appear: I won't go back to the wired. This message takes more than two times longer to type. I can't stand it.

  So far, it is the only wireless I use. I have not installed the dvd software.

  Can I install extra on more than one machine (my computer desktop and laptop) or an other patition on the same desktop?

  Thank you.

  Hello

  I think that the antenna of keyboard is above the insert / home / page keys and probably to the front or the middle of the mouse.

  If the table is made of a dense material, it can affect the signal.
  To check if this is the case, try to put the mouse or the keyboard within line of sight of the dongle, or at least as close as possible and test whether or not it is more responsive.

  Try to install the latest version of the driver and the IntelliPoint software from the download site: http://www.microsoft.com/hardware/download/download.aspx

  Although they should be good and charged, try different / new batteries just to be safe.

  In addition, you have other wireless devices?

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Keyboard not typing special symbols above the number keys online, but works fine otherwise

  Original title: keyboard problem

  Keyboard not hitting that special symbols above the number keys online, but works fine otherwise. When the shift button is held and you press a number key he type the last letter, which was typed any symbol, you try to type. Keyboard worked fine before, tried another keyboard and got the same results.

  Hi Patrick,

  1. what type of keyboard you use? Is it wireless or wired?

  2. did you of recent changes on the system?

  3. what web browser do you use?

  Method 1:

  If you use Internet Explorer, you can use another web browser and check if the problem occurs.

  Method 2:
  Step 1:

  You can start the computer in safe mode with network and check if the problem persists.
  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• C40 satellite function keys do not work outside of Windows after installed own W10

  Hello

  C10Q C40 is already a squeeze tight with only one disk of 32 GB mem. So I an install clean of W10 and everything is great, with lots of room to spare now - EXCEPT - some function keys do not work as the empty screen, while the windows outside, using a boot CD, none of them work. I need to download a driver utilities Toshiba? Cannot find it anywhere!

  Win10 drivers can be found here http://www.toshiba.eu/innovation/dow...jsp?service=EU

  Install the driver of Toshiba, Toshiba system and settings system.

• keyboard not typing, but make orders instead?

  I have nothing on my computer, no changes, but for some reason, my keyboard is doing instead of typing commands?

  And try a different keyboard.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

• Satellite C850D - keys do not work when you try to connect to the laptop

  First of all I would like to say sorry for my lack of computer knowledge. My C850D is only 2 months old, last night, it worked perfectly... this morning when I turn it on for my password all the keys would work.

  I'm a little angry and just reset the laptop. Still not working and even after that... one suggest why my keyboard no longer works.

  Start the laptop and try to enter parameters of BOS. You can use keyboard here?
  Use arrows and space bar to change the options.

• BlackBerry touch Z30 responds, keyboard not typing in the fields, how to install?

  As the title suggests. I did a reset of the safety, the touch screen works very well and can move around as usual. It is every time I try to type on the keyboard. It depresses and produces noise, but no character come in the fields. I've recently updated to 10.3.2.xxxx now I can't connect to my BB protect in order to access the phone. Its stuck in the installation program.

  What can I do to overcome this? Any help is very appreciated. I know that my loggin and password. Just can't so can not go back to a full backup in link BB.

  Hello and welcome to the community!

  Given what you describe, I would recommend a reloading very clean BONES and also through the unofficial autoloader methods:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Hopefully that will clear up the problems you encounter (in condition, of course, that this behavior started directly after you have completed the update you mentioned and haven't started some time before that).

  Good luck and let us know!

• Satellite Pro A60 would not work XP, but is fine with W2k

  I bought my A60 as last year, worked well but oneday froze, tried to reinstall the OS using the product recovery disc. the procedure went very well and asked for a restart, but on reboot it froze again, I tried Pro Rec disc a few times, but with the same result.

  Then I tried the fresh xp copy that also froze before installing the files. I am now using windows 2000 which seem 2 ran fine for a few weeks, but now I have no volume.
  I have triede pilot plant but it still would not come. If im use it without volume, but I can't understand why would he not let me install the product or Win XP Recovery disk but would allow win2000 but without volume.

  Please help me, thank you very much

  Hello

  It is very strange that this unit freeze after the installation of recovery. Please remember that no external devices are connected to the unit when you do this.
  It will also be interesting if you have upgraded from memory.

  Before using the recovery installation CD you can also try to set default values in the BIOS.

• Satellite A40: Drive does not read CD but DVD

  I have a SatA40 (now almost 3 years ago) and cd/dvd unit does not work well, the cd cannot read or write, but the dvd reads all my DVDs.

  Does anyone have an idea why we don't have, and the other does not? (Everyone I mention that he thinks it's strange - thought if does not work the other shouldn't be.)

  Hello

  You sounds of description as the lens of the drive cannot calibrate in the right position.
  Usually before the player will read or write the middle of what the lens must be calibrated.
  In you case the lens can not calibrate and that's why the drive does not recognize the CD.

  Usually in this case, the drive must be replaced.
  But maybe you are a lucky man. Try to clean the lens gently. But be careful

• Satellite P305D-S8828 keyboard missing my typing and FN + F9 does not work

  Hello everyone.

  I'm new on this forum. Im sorry for my bad English right now. I hope I can explain my problems.
  I just bought a laptop computer to the United States with a great price. It's a great laptop, but there are 2 problems and they have big problems of r for me.
  It's Toshiba Satalite P305D-S8828 which is not available in europe, only sell in the United States.
  This is the link:
  http://explore.Toshiba.com/laptops/satellite/p300/P305D-S8828

  Laptop keyboard seems kind and gentle and good typing, but especially on a msn messenger box or forum page response, when I type, he's missing part of my typings? I mean, I used to use my quick keyboard, but it's like he's not pressing all the buttons, but I really rely on the letters. So the things I write are mixed, not understandable cos of lack of the letters.

  This isn't my first laptop. I used a bit more before, but nothing like this has happened before.
  It doesn't always happen, but generally occurs.
  I don't know what to do and this really do my head.
  I use Vista Ultimate Turkish. Don't you think that it is an OS problem? Or maybe the bios? More later (v1.90) I heard the same problem happened to some Fujitsu Siemens laptops, but it has been resolved with a bios upgrade. I hope you understand my problem and someone help me.

  My second problem is that my FN + F9 (function key) does not work. But some of them work, like FN + F1, FN + F2, FN + F3... work but FN + F9 does NOT work? :(
  I want to disable the touchpad when I plug my usb mouse, but I can't do it using FN + F9. My touchpad driver is installed and my OS is Vista Ultimate. Could you help me for that too?

  I hope that answering my questions.
  Thank you now
  all the loves of Turkey
  EMRAH

  Go to the Toshiba site us and download the latest version of the BIOS. Having the latest version of the BIOS is important on the new models.

  For the issue of the Touchpad, download and install the latest package of added value for the P305D and reinstall the driver from the Touchpad.
  If you have installed the drivers for your mouse USB (for example drivers Logitech or Microsoft), remove them. They may be in conflict with the Touchpad

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Satellite 5200 802: keyboard and touchpad not working

  Hello world.

  I was hoping that someone could help me with a problem I have with my 5200-802 Satellite. The keyboard not work DVRs, although it shows in Device Manager and report it as works fine. I updated the BIOS and tried a bunch other things basic suggestions would be greatly appreciated.

  It may be useful to mention that I also can't my touchpad driver to register.

  Thank you very much.

  Hello

  Do you have an error message, or have you signs of bed on the screen?
  You can use the keyboard to access the BIOS?
  If yes then the keyboard has been recognized and works!

  If you can not use the keyboard running OS then I recommend to remove the keyboard device in Device Manager and restart the laptop.
  The keyboard should be recognized again after new OS reboot.

  But I think that you will not be able to access the BIOS.
  Due to the fact that the touchpad works too, I imagine that the hardware is defective or there is no connection with the motherboard. Maybe a lose cable

  Maybe you should check this. But note; If you have no experience with laptop technicians. Good bye