Satellite 5200 how to replace different dvd player

Hello
Many users seem to have problems with the Matsu * a readers in this model. I wanted to replace my dysfunctional Matsu * dvd uj 810 and the nearest player, I found in stores is a uj 830 with coverage set up perfectly. However, it is not recognized by the system and I have susptect I need to change some settings such as master slave settings that I can not, because there seems to be no fully accesably installed BIOS.
What is never replaced anyone this drive with one more current?
Thank you
Andrew

Hello

As much as I know all CD or DVD in Toshiba laptops are pre-set to be a slave. HARD drive is preset to be master.

Please keep in mind that all CD or DVD devices may not work correctly with all Toshiba laptops and before that you want to change any hardware component to pick up some information service partner.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite M35: How to open my DVD player free region one?

    Dear Sir
    I have toshiba satellite m35 series & while I use my dvd to watch movies it ask me several times to change the region & I don't have it a limmet. now it is blocked. If it please tell me how I can open it & keep it region free?
    Thank you for your help

    Hello

    Unfortunately, it was possible to change the free parameters of the region 5 times. After this change, the settings are locked. It is not possible to make the region free drive new ;(

  • ATC-220-EB51 - how to replace the DVD drive.

    Hello

    I'm looking for instructions on how to replace the DVD player that came with the computer "Dummy".  Can someone point me in the right direction?

    I sent you a private message.

  • How do I replace the DVD player in a Tecra A5

    Hello

    Does anyone have the details on how to replace the DVD drive in a laptop Toshiba Tecra A5?
    I tried to find a service manual but not had any luck.
    Please can someone help?

    Thank you

    Hello

    The CD/DVD drive can be replaced easily
    The CD/DVD drive is fixed with the screw hidden under the memory module cover.

    You will need to first remove the memory slot cover the GET access to this screw.
    Remove the screw fixing the optical drive module, then use your hand to push the CD/DVD drive and then drag the STRANGE Bay.

    All that s.
    It of really not difficult, but you should always be cautious!

    Good bye

  • How to replace the DVD drive on a series of Satellite?

    Could someone give me instructions how to replace the DVD drive?
    I unscrewed a few screws in back and two under keyboard and I still can't get out.
    Any suggestions?

    Thank you
    Select this option.

    I found it!

    It's the single screw! It is under the flap of the memory.

  • How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

    Separated from this thread.

    Hello

    Thanks for the reply, I clicked on the link and it shows windows...

    Here I can not open the widows of anywhere.

    How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

    MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

    He always goes to startup repair

    then he said not being able to correct automatically

    Under system recovery option what can I do?

    I don't want to go back to the point of origin of the memory (factory settings)

    Thank you

    Patrick

    Hello

    Have you tried using SafeMode w/command invites to perform a system restore?

    1. Press the power button to turn on the computer.
    2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
    3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
    4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
    5. Follow the on-screen instructions to perform a system restore.

    You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

    Using Microsoft System Restore (Windows Vista)

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

    You also have the option to create a backup of your files when you perform a recovery

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

  • How to replace the DVD - RW on Satellite P10?

    Hello

    I need to replace the DVD - RW (Mat * a 811 UJ) on my Satellite P10 554. What models are recommended or work without problems?

    Thank you!

    Hello
    I studied a bit and found these compatible discs:
    -The DVD-R /-RW Toshiba SD-R6112
    -DVD - ROM Toshiba SD-C2612 and Matsu drive * a SR-8177
    -The multi-lecteur Matsu DVD * a UJ - 811b
    -Player combo CD-RW/DVD-ROM Toshiba SD-R2412 and TEAC DW-224th-85

  • Satellite C855 - 19 k how to open the DVD player?

    How can I open the DVD player?
    Cannot find a symbol of the keyboard representing the eject option.

    Thank you.

    Hello

    Do you mean the CD / DVD drive?
    The optical disk drive is placed on the left side and there should be an eject button.
    Have you checked it properly?

  • Satellite L - cannot access a Toshiba DVD player

    My laptop Satellite Pro L-series came with windows and upgrade to Win 7, which I am now running. I tried to read a disc that I burned on a comptuer spent, but tells me it's the wrong region (huh?) - my region is set to 4. So I gave up on it for the Nuncio and switched to the Toshiba DVD player.
    When I try to open it, I get a message that module (s) is / are missing. If the restart does not work, re - install the application.

    How can I do this?
    TIA

    Hi billym,.

    Normally, you can download a newer version from the official website of Toshiba DVD player if search you for downloads available for your laptop model:
    http://EU.computers.Toshiba-Europe.com

    But if you have a DVD with a different region code, you need to change the region code of your CD/DVD drive (Device Manager > properties of the CD/DVD drive).

    But don t forget that region code can be changed 4 times

  • Satellite 5200-903d: unable to burn DVDs

    Hi, I have a satellite 5200-903d winxp sp2, and now when I insert a blank dvd, it appears like a full cdrom. Iused to use drag / drop and dvdshrink/nero with no problems. now, it seems to go through the motions of burning, but still left with a blank dvd. any help will be appreciated.
    regards bob

    [Edited by: admin December 17 05 08:54]

    Hello

    In my opinion, your DVD player is faulty. The position of the laser for reading and writing is not the same. It will be interesting to find out, you can watch DVD movies and if all DVD media can be read correctly. Try to remove the drive from Device Manager. Let the operating system detects the drive again and test it.

    I put t think you can do something.

  • Toshiba Satellite 5200 - how to open the case?

    Hello

    I have a Toshiba portable computer Satellite 5200 903.
    Here's my problem:

    My laptop is getting very hot, even it is idling. This is because the cooler got very dirty over time. And if the case/CPU-fan runs all the time, but no air comes out there.
    Now, I would open the case and clean the cooler. But for some reason, it is not possible. I removed all the screws in the back, in the Bay of battery and the hard drive Bay, but it's not working. So I think there must be some other screws, maybe next to the powerbutton on the top under a blanket. But I don't know how to remove this cover, without breaking.
    Or maybe I'm totally wrong and missed something else.
    I hope someone can help me.

    And sorry for my bad English.

    Thanks in advance.

    schlady

    Hello

    in my expierence the screws on each NB arranged differently and I would disadvice you open the NB to yours!

    In my opinion, it will be the best way to the NB to a Toshiba Service partner. They have the kowledge how to open each specific model and change the FAN!

    This will cost money, but you can be sure that it works after the check-up!

    You can find the following Service partner
    https://EU.computers.Toshiba-Europe.com - Support & download and find an authorized Service partner!

    Goodbye, Sam

  • Satellite P200 - can enhance the HD DVD player on a Blueray player?

    My laptop a P200. It has an internal HD DVD player. As this is a defunct standard can it be replaced with a blueray player? If so what model fit.

    TIA
    John

    Hello

    I doubt that this was not possible because I don t know all internal BlueRay players that are compatible with this laptop.

    However, if you'll be able to find a Blue Ray internal ODD and updated it so please come back and post the results.

    Welcome them

  • Satellite Pro P100 - 465 Vista: of DVD player may be corrupted or missing (Code 39)

    I just bought a P100-465 pre-loaded with Vista Business, it was working fine and I managed to load the DVD player software.

    However, the second day of use, the DVD player has dropped off and in the device manager tells me that Windows cannot load the device driver, it may be corrupted or missing. (Code 39)

    When I check the details of the pilot, I have the last version loaded and Vista cannot find another update.

    This before with Vista on a Toshiba Qosmio. What is my dosage?

    Hello

    A question: why you n t use the option to search the forum to find discussions that could provide useful information?

    I used this option and found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    You will find a link to the Microsoft page that explains the problem and a solution

  • A satellite - not enough video memory for DVD player

    When executing my windvd Invtervideo player, I get an error message that says "Not enough MΘmoire for dvd player" which is the benchmark for this? also the sound experience of parts multimedia player dvd but no video Please help!

    Hi, mate

    you only post us a lot of information on your laptop. I can hardly believe that there is not enough memory to run it. What happens if you try to the CyberLink PowerDVD program. You can also try update video codecs. Download K-Lite Mega Codec Pack

  • Re: Satellite M30-107 - new compatible CD/DVD player

    Hello
    I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
    What is Teac dv-w22e?
    The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

    Thank you very much for your help!

    Hello

    (Page 4 to page 7) user manual contains information on the supported players!
    Looks like you didn't she check properly.
    This readers seems to be compatible:
    * UJDA750 *.
    * SD-R6012 *.
    * UJ-811 *.
    * DV-W22E *.

    You can find this number in google to get a...
    Otherwise, you may contact the ASP in your country for this player compatible

Maybe you are looking for

  • MacBook Pro Support - please help

    My MacBook Pro is in repairs since one and a half years. The problem is continuous Frost, blue and pink, fuzzy screen. Tech Center have already changed the card logic 4 times, keyboard, speakers, high & low Carter, battery and an optical drive in yea

  • How can I move my photos to a memory card windows photo gallery or a CD/DVD

    No, not in the photo gallery, far from the Gallery on my memory drive, I have no (send to) when I click right, can someoneThank youLyn

  • I can not package for the project when I used the blackberry resource files

    I can't package the project when I used the blackberry resource files. Packaging HelloWorl projectC:\eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin\rapc.exe-quiet codename=deliverables\Standard\5.0.0\HelloWorl deliverables\St

  • Unidentified partition? (Disk local Q :))

    My HP has recently created a new partiion claiming to have 0bytes free total 0bytes. It is said "Local disk (Q". ")" This isn't the score of "HP_TOOLS" & it isn't even came under my control panel disk management, so I can't get rid of it. It becomes

  • Why can't I change the content at different breakpoints?

    For some reason, after the establishment of breakpoints on my master, whenever I try to change the content at different points of rupture on my subsequent pages, if I click on a breakpoint I can get to this provision of breakpoint, but the cursor tur