Satellite A-100 Bluetooth problem

Similar Questions

• Satellite (PSK30E) L750 - bluetooth problem

  Given that the other thread is already closed and suggestions from here don't give me the help I must ask once again,

  I bought the version Satellite L750-PSK30E I have same questions regarding other bluetooth L750 problem.
  I installed Win 7 PRO - 64-bit, and after each installation driver, I could find under the list of drivers with intel, then the bluetooth driver and then put, but the battery is not correctly, telling me to switch to BT when I
  with FN + F8.
  He said I'm keep lack of ToshDpAPI.dll, even if I installed atheros before filter?

  Also, when I restart computer wifi get a second, and then said that there is no connection.
  When you switch the switch (FN + F8) market it works fine?

  Wierdest thing is I installed the same computer, that I bought for my brother and it works fine witout of problems?
  What should I do?

  Don't tell me to reinstall the wifi and BT drivers/stack, cause I did it several times and it's worked so far.

  I installed all the drivers are all downloaded from selection toshiba and 64-bit drivers.

  Many people have various problems after the installation of clean operating system. Problem is that all the drivers, tools and utilities must be installed in the proper installation order. Maybe you have installed your laptop a little different this laptop from your brother.

  Here is the order of the good setup for Win7 64 bit:

  Win7 SP1
  SW 9.2.0.1015 Chipset installation utility
  4.8.6.0 TOSHIBA supervisor password utility
  TOSHIBA HW Setup Utility 4.8.6.0
  Sun Java2 Runtime Environment 1.6.0_20
  TOSHIBA Bulletin Board V2.1.10
  TOSHIBA ReelTime 1.7.17.0
  Intel Management Engine Interface 7.0.2.1164
  Driver Intel 8.15.10.2353
  NVIDIA 8.17.12.6669 display driver
  Driver Intel Rapid Storage Technology 10.1.2.1004
  TOSHIBA value added package 1.5.4.64
  USB3.0 Driver 2.0.32.0
  NVIDIA HD Audio Driver 1.1.13.1
  Conexant Audio Driver 8.51.1.0a
  Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
  or
  Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
  or
  Driver Realtek Wireless LAN Driver 2.00.0013
  TOSHIBA 1.0.3 Wireless LAN indicator
  Synaptics Touch Pad Driver 15.2.11.1
  TOSHIBA Software Modem 2.2.97 (SM2297ALS05)
  Conexant 7.80.4.53 Modem driver
  TOSHIBA HDD Protection 2.2.1.12
  Atheros Bluetooth Driver Package v1.0.7 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.04 (T)
  Atheros LAN Driver 1.0.0.46
  1.0.0.12 Realtek card reader
  TOSHIBA Sleep 1.4.2.7 utility
  Facial recognition TOSHIBA V3.1.8
  TOSHIBA eco Utility 1.2.25.64
  Intel Proset 14.0.2.0.1.s64_wCAT
  Intel Wireless Display 2.0.29T
  TOSHIBA HDD_SSD 3.1.64.7 attention
  TOSHIBA Service Station V2.1.52
  TOSHIBA PC Health Monitor 1.7.4.64
  ConfigFree 8.0.37
  TOSHIBA Web Camera Application V2.0.0.19
  TOSHIBA V4.00.4.54 VCR - HAS
  WinDVD BD for TOSHIBA 10.0.5.855 3D
  Corel Digital Studio for TOSHIBA 1.5.10.332
  TOSHIBA Disc Creator 2.1.0.6 for x 64
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 14_wMSI
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1
  PatchFiles$ $2 PCIIDEREG - 1.2
  PatchFiles$ $3 TosVolRegulator_x64_1.1
  SWHelper for Toshiba manual V1

  If you can not find the download page of some of them on Toshiba must not be installed and it is included in the original recovery image only.

  Please check this list and maybe you should try to install the OS as a result of this order of installation.

  Good luck.

• Satellite A210-183 Bluetooth problems - reinstall?

  I continue to have some problems with my BT connection: cannot send and receive files
  through bluetooth.

  What should I do to reinstall the drivers of BT or new install?

  Thank you very much
  Perry

  Hello Perry

  Can you please bring to end your first thread under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=154262

  Can you put in service BT or not?
  If so, I do not reinstall BT module will help. What you need to do is in fact secesfull coupling between phone and your BT phone. If the two devices are connected successfully, you can send and receive files without any problem. I do the same with my Motorola cellphone and Satellite P300 laptop.

  Check the Toshiba Bluetooth Center under http://aps2.toshiba-tro.de/bluetooth/ and visit the FAQ and HOW TO sections. If you can't find a useful on BT connection please let us know.

• Satellite P855 - 30G BLUETOOTH problems

  Satellite P855 - 30G

  I've been crazy half over the last three days, trying to get the Bluetooth works on this laptop.

  I have a Logitech Mini Boombox (bluetooth wireless speaker), I got work perfectly on my previous laptop Toshiba (A500)

  I absolutely can't it connect. When I download the Toshiba bluetooth stack it stalls to install (about 10 percent) and I waited and waited, it will not be installed. I press cancel and it tells me it is installed, but it is not! Have a clue as to what might happen?

  In General, the principle should be the same as on your old notebook.
  Before you want to use BT you must activate the BT module by using the FN + F8 key combination.
  After doing this BT stack schould be installed correctly.

  What happen when you use the FN + F8 key combination?

• Satellite A100 - device Bluetooth problem

  Hello

  I just installed Windows 7 on my laptop (Satellite A100 - 003 PSAAR).
  Found and installed all the drivers, but when I tried to connect my mobile phone via bluetooth for my laptop I got an error on the specific driver "Bluetooth peripheral device" and could not work.
  So now, 1 driver be found and its what a (pripheral bluetooth device)

  Any ideas where I can update the driver?

  Hi mate,

  You have installed Bluetooth driver properly? You may notice yellow exclamation in Device Manager?

  However, you can download the latest Bluetooth driver on the portal of Bluetooth from Toshiba:
  http://APS2.toshiba-tro.de/Bluetooth/

  Check it!

• Satellite S1800 100: startup problem

  I have a laptop 100 S1800 as a second machine and have recently experienced problems at startup. Food, power & battery LED turns on but nothing happens, no power at all. I have to keep on and off until this finally that she comes to life. Sometimes on stop, he made a series of beeps before stopping.

  Hope that makes sense for someone that I'm stumped.

  See you soon

  Hello

  Perhaps there is only one small problem with the power button, but due the beeps it can also be a major hardware failure. In any case, you should take the machine at the service.

  Good bye

• Satellite SP20 - 761, Bluetooth problem, I have it?

  Hi, I have a Sat SP20 - 761. Recently I tried to connect my mobile phone via Bluetooth, but I can't activate it for some reason, I can connect by infrared no prob but not the Bluetooth. Any help would be appereciated.

  Hello

  Please provide your serial number and I can see if you have installed BT.

  BR

  Tom

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• error 0 x 00000024 on Satellite Pro 100

  Hello

  I have an old Satellite Pro 100, handed one to nine.
  I was loading a .iso file when my laptop crashed.
  I restarted to get to a blue screen with the error message 0 x 00000024, followed (0x001902FE, 0xFX7AAF380, 0xF7AAF07C, 0x86E74805).

  He told me to restart the laptop and run chkdsk /f in command.
  I started in safe mode with cmd, cancelled stpd.sys, which caused my laptop down and ran chkdsk/c (check) before I ran chkdsk /f (fix). It worked very well.
  I then input the command chkdsk /f and cmd said that he could not access and lock on the drive. He asked if I wanted to run chkdsk /f on the next startup. I said yes and then restarted.
  It came with the blue screen again, so I held the switch to turn it off, and then turned back on.
  I loaded in safe mode with cmd and cancelled loading stpd.sys.
  This time, there was a longer break, and I assumed that the laptop was running the command chkdsk/f function.
  The laptop has rebooted spontaneously after that she 'finished', as far as I could tell, but once again to the front blue screen.
  I also tried to use the command chkdsk /r (resolve), but that froze just of the laptop.
  When I restarted the laptop, he returned to the blue screen.

  Can someone tell me how to solve this problem, preferably without wiping my HARD drive, I read on websites who told me to use the chkdsk/f above method proposed my blue screen?

  Thanx

  Hi mate,

  First of all, it would be interesting to know what model Satellite Pro 100, you exactly. Satellite Pro A100, Satellite Pro L100 or something else?

  It's not easy to tell why you get thses blue screens, but have you tried a system restore to an earlier point? You can do this in the advanced boot menu (F8) where you can also choose Safe mode, etc.
  Check this box!

  If this doesn t work I think you need to reinstall Windows. If there is a recovery disc supplied with your laptop you can use. This disk can restore factory in a few minutes and your laptop should work properly again. :)

• Satellite L20-100 can be started from a USB external hard drive?

  I recently bought Toshiba Satellite L20-100 and I wonder if:
  1. is it possible to boot this machine from a disk usb external drive?
  2. it is possible to attach another internal hard drive?

  Assuming that the two answers above are 'no', how can we solve the following problem: I need hard drive space, I need to launch 3 systems of separate Wxp operating on the same machine (Toshiba Satellite L20-100).

  You are right. The answer is no. Only thing you can do is to create 3 partitions and install on each a favorite OS. Using the Boot Manager, you will be able to choose one that fits in the beginning upward.

• How to create a backup for Satellite L20-100?

  My Satellite L20-100 crashed & it took me 24 hours to recover (using the provided factory product recovery CD) & for reinstalling other software & updates.

  Now I'm afraid, it may crash again & I have 11 GB of software. I had a function on my Windows XP console start > programs > Accessories > system tools > create backup disk (or recovery) before it crashed, but it is no longer present.

  ANY THOUGHTS? URGENT PLEASE!

  I recommend you to use a very good third party software called NORTON GHOST. I use it for a year. You can create own recovery DVDs and use any time when there is a problem.

  I do the same thing. This created individual image is recorded on the partition d. If I want to have the new facility that I simply start GHOST and the partition c is crushed.

  If you need more info please let me know.

• Satellite L20-100: Nero does not recognize the UJ - 841S

  Hello
  Our computer is Satellite L20 - 100... He has a special CD burning program Sonic Record and it does not crush. I want to use Nero or Alcohol 120, but the computer does not support them.

  Is there a special driver or something that can allow the use of these programs? Or how to use Nero on my laptop? I'll be happy if someone can help me...

  Thank you

  Hello

  Nero it works without any problem on your laptop and you don t need no additional driver.
  But maybe the different burning applications have a bad influence on the only burning software. Try to use only a single application.

• A few questions on the Satellite U920t-100

  Hello

  I bought the Toshiba Satellite U920t-100. for this tablet, I have a few questions. simple install windows 8 Professional on the current installation?
  what driver, software installed and other toshiba? are the problems with it?
  There is something about a pro installation win8?

  What of the screen when I run the u920t with an external monitor?

  I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  is it a good idea for it?

  Best regards

  All these questions different so let's start with first.

  > simple I can install windows 8 Professional on the current installation?

  Read this FAQ from Toshiba document. It provides all the answers and a detailed instruction.
  [How to change Windows 8 for Windows 8 Pro | http://aps2.toshiba-tro.de/kb0/HTD2B03F20002R01.htm]

  > what driver, software installed and other toshiba?
  Windows 8 uses the same drivers as Pro

  > What about the view when I run the u920t with an external monitor?
  What do you mean exactly? You can use internal display, external display or both at the same time

  > I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  > which is a good idea for that?

  Why not. Dynadock U3 supports own GPU so you can use 3 monitors at the same time

• Satellite 1800-100 won't start with new memory

  My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.

  I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.

  Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.

  So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).

  I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.

  Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.

  Please help and understanding.

  Kind regards...

  Hello

  Well, it very difficult to say why it won't start.
  I think that there are several possibilities:

  (1.) you used a bad module
  (2.) the second Bank of the Board of Directors has a malfunction
  (3.) the laptop does not support max 256 MB of RAM

  I think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB

  I think that the second ram location may have a malfunction.
  Please check the second slot with a module of memory.

  The second possibility is to use exactly the module which is recommended by Toshiba.
  As I remember it s PC100 128 MB (PA3005U) SDRAM

• I can't burn CDs on my Satellite A 100-455

  Hello

  My problem is that I can't burn the files to CD with my Satellite A 100-455. I tried different types of CD, but the driver does not see anyone of them!
  The driver is reading CD correctly either CD or DVD. Any idea?

  Thank you

  Hello

  What program you´re with the help of burn your files? Are you trying to burn the files with windows Explorer? Maybe you should try another program, such as Nero or cdburnerXP (which is free for download).

  Another option would be to go on the toshiba driver download site and download the latest driver DVD-RAM of your machine if it is not already done.

  Would be nice if you give some information you give some information on your problem.

  Welcome them