Satellite A-C55-1JL - external resolution question

Similar Questions

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them

• Satellite A-C55-1JL - compatibility with the ram module

  I want to upgrade the RAM in my Toshiba C55-A-1JL. Standard module is Hynix PC3L bitensión 4 GB. But on the slot, I saw the text "1.5V. I bought the 4 GB of Kingston module with identical parameters as Hynix module, only the voltage is different. Kingston module is only 1.5V voltage.

  My question is: what voltage supports the mainboard that laptop? Can I use this add-on from Kingston with original Hynix ram module?

  Standard module's voltage Hynix PC3L

  This means that the module supports 1.35v or 1.5V

  Can I use this add-on from Kingston with original Hynix ram module?

  In the worst case if you use the not entirely compatible RAM module, the laptop does not start up... try it

• Maximum external resolution for Satellite L50-A-19N (PSKK6E)

  Hello

  What is the maximum resolution supported by this laptop to an external output (provided with HDMI Cable DVI)
  To sum up, the laptop contains Intel HD 4600 and GPU from NVIDIA GT 740 M

  To extend my question:
  How can I find the version HDMI of this notebook and how to evaluate if the laptop will produce a good refresh (60 Hz +) to graduate to Full HD resolutions?

  External resolution depends on the graphics card as well as the interface.
  The Satellite L50-A-19N plug provide next Note:

  Maximum external video modes:
  Maximum resolution: 2 048 x 1 536
  Maximum refresh rate: 100 Hz
  resolution No interlaced with a maximum refresh rate: 1,600 x 1 200
  Output HDMI support 1080 p format

  The GT740M that is used in this notebook NVIDIA GeForce takes in charge the following resolutions:
  EDP LCD 1.2 support - up to 3840 x 2160
  LCD LVDS support - up to 1920 x 1200
  Analog VGA display Support - up to 2048 x 1536
  Multimode DisplayPort support - up to 3840 x 2160

• Satellite Pro C55-A-1N1 - behaviour Firefox mouse Windows 8.1

  I recently bought a Satellite Pro C55-A-1N1 and I'm slowly getting used to Windows 8.1.

  As a long-term Firefox user, I downloaded the last, but I find very strange mouse behavior.

  When I scroll to the bottom of my list of bookmarks, the Synaptics touchpad seems to select several bookmarks all on its own. If I move my mouse away from the bookmark list, the items get selected.

  If I plug the external mouse, the same thing happens.

  I think not not be selected until I click on the Mouse/touchpad button, the items. Is there a setting somewhere that will avoid this strange multiple automatic selection?

  Pad touch various parameters found in:
  Control Panel? mouse? last tab (button Synaptics) device settings

  There you will find all the options of the touchpad and the decryption.

  I guess you need to disable something like tap & drag or a similar option

• Satellite A300 PSAG1A: Cannot display resolution of 1080 x 1050 on monitor

  I have a Toshiba A300 - PSAG1A with Vista Business.
  I want to display on a monitor to 1080 x 1050, but this is not an option in the drop-down list.

  The graphics card driver lists as a monitor generic Non - PnP on Mobile Intel (r) 965 Express ChipsetFamiy
  7.14.10.1329 driver version (13/09/07)
  I tried to date via the toshiba site but tells me that I meet the system requirements?

  All ideas

  Hello

  Did you check your user manual if this external resolution is available and possible?
  My knowledge of the user manual should contains such information.

  I checked my manual user (but not for the A300) and found useful information on the external resolution supported on my laptop satellite.

  Generally, you will be able to choose your favorite only resolution if the two parts as graphics card drivers and graphics chip would support such a resolution.
  If one of these parts would not support it, then you will be not able to use it!

• Tecra R940 - 1 H does support external resolution 2560 x 1440

  Hello

  I use a laptop TECRA R940-1HP
  I want to buy professional instructor Phillip 272P4QPJKEB/00, with a resolution of 2560 x 1440.
  Please write to me.

  My laptop can support such a resolution?

  Support of external resolution depends on the graphics card that is built into the laptop.

  As I know the Tecra R940-1HP supports the chip Intel HD Graphics 4000.

  To my knowledge, this chip Intel HD 4000 supports max resolution of 2560 x 1600/32 bit via Display Port.

  I guess more details on Intel's own graphic chip found on the Intel page.

  Welcome them

• Satellite Pro C660-1JL - how to change the language of Windows 7?

  Hello

  I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1. And I would like to change the language from German to the Russia.
  In accordance with the instructions of the microsoft home page I could not get the result. MUI Pack does not appear when you are looking for Windows updated (some other updates are available only, but not language pack)...

  What would you recommend how to fix this?
  Its Satellite Pro C660-1JL

  Hey,.

  > I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1
  You can change the language on Windows 7 Professional t, this is possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate edition.

  So if you want another language, buy Windows 7 Ultimate or be happy with the current language of Windows 7 Professional. ;)

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Satellite Pro P300: external resolution 1024 x 768 instead of 1680 x 1050

  Hello

  I run my Sat P300 on XP and this laptop screen is fine (1440 x 900 pixels on radeon HD 3650).

  Now, I want to connect the laptop to an external monitor flat screen, a Samsung, which requires an optimum resolution of 1680 x 1050 pixels.
  The samsung monitor works fine on my laptop more old: I close the lid of the laptop and the screen changes to the Samsung with good resolution of 1680 x 1050.

  Now, when I connect the P300 and close the lid, the screen switches to the Samsung, but the actual screen resolution is 1024 x 768, despite the fact that the 1680 x 1050 is set in the display properties windows.
  In fact, the screen is probably 1680 x 1050, but sees only the monitor 1024 x 768 (i.e. the desktop is bigger than the monitor can show, and I can push the office left/right or up/down with the mouse.

  So it appears (Hey, it's just a guess) that the radeon sends a screen 1680 x 1050 with the wrong frequency (48.2 KHz instead of 64.4 KHz as my monitor watch)!

  The Samsung drivers are installed, and I've updated the BIOS to 3.40 win, but not a solution.

  Someone at - it an idea?

  Hello!

  Have you checked the manual of the Satellite Pro P300?
  I think you should do this because there you can read why the screen resolution of 1680 x 1050 doesn t work.

  The Satellite Pro P300 supports the following screen resolutions:
  800 x 600
  1024 x 768
  1280 x 800
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1536

  Do you not see where is the problem? ;)

  Good bye

• R200 - Question about screen external resolution 1920 * 1200

  My boss bought this screen and is a little disappointed because he cannot reach the maximum resolution of the screen tft 23 "1920 * 1200. The R200 proposes that the resolution, which have an aspect ratio of 4:3, so the maximum for the screen is 1600 * 1200. Is there a driver 'special' for the graphics chip allowing non 4:3 resolution?

  Thank you

  Hello

  AFAIK on external display the maximum resolution is restriction of the graphics card and unfortunately there is nothing to do. The only thing you can do is check all the settings in the menu TFT. I'm pretty sure that you will find an option for switching of photo format.

  Good bye

• Satellite A100-02 b: Vista automatically value external resolution 640 * 480 Solution

  Hello

  I had a problem with my extern monitor and found a solution for this.
  I would fix my screen extern extension of office on the left in 1024 * 768 and 75 Hz,
  same Aero still works.

  This has of worked but on any restart or return of eve/eve extended a little reset
  It is on the right side at 640 * 480 and 60 Hz after a few seconds.

  As I saw yesterday the Task Scheduler, I found under Windows/Microsoft/MobilePC
  an element named "TMM" - Bangkok-Manager, launched on each connection to the user.

  Because I always had the feeling that Windows drivers and NVidia driver are 'spanking '.
  on touch screens, I disabled who and - voila - everything is ok now.

  My question is:
  Can this cause side effects negative - and what type?

  Thanks in advance - matz

  Hello

  First of all thank you for sharing this info with us. It always useful to have users who have solved the problems and provide the information here in the forum.

  As to the question;
  > This can cause some side effects negative - and what type?

  I don t think this change of parameters could have a negative influence on the running system or the graphic representation. But follow your comment!

  Greetings

• Satellite Pro M30 external resolution of 1920 x 1200 monitor

  I got a widescreen monitor that supports the screen resolution 1920 x 1200. FC GeForce Go5200 supports 1920 x 1440, but does not support 1920 x 1200 (the manual of the current user on the site shows also 1920 x 1440 and even higher, but not 1920 x 1200).
  Because the card can handle higher resolution I think that an update of the BIOS on the card could add to this resolution (widescreen is possible in 1280 x 800 for the standard screen of the laptop). But the Web of Toshiba site does not show a BIOS update and don't not have new drivers for the NVidia card (45.56 installed on my laptop and also the highest available on the site).

  Anyone know a solution?

  Hello

  Of course the graphics card can not handle with this resolution of the screen. Try it please what Tom suggested. A you a few CD driver with this monitor?

• Satellite L670D Simple Drive external HARD drive question

  OS Windows 7 Home. Preload by Toshiba.

  Have a Toshiba simpledrive 1 T. When plugged into the USB hardrive are rewritten with shortcuts. Hard drive in Explorer properties shows data from correct volume on the disk, but I don't have access to the drive. Shortcuts anywhere.

  Disk formatted with laptop and work very well, but can not eject. Whenever I want to eject the disc, it is being used by another program. Cannot find the program using Xdrive. Once the X drive is off and then turn it back on shortcuts will be displayed again. Do not have the same problem with Xdrive on my PC - OS Win 7 Pro - works fine.

  I've updated to Toshiba laptop drivers, Bios etc. Also updated Windows still no go. It must be a problem with laptop, but I seem to not be able to solve it.

  Help will be appreciated.

  Hello

  Hmm, try connecting the HARD drive to the computer before booting the operating system Win.
  Also, check if the software Xdrive isn't blocked by any other security software (antivirus, firewall tool, etc.).
  I also recommend checking the power management of the Win 7 on your laptop. Check if the USP ports are not configured to save energy.

• Satellite A-C55-1HC CPU Upgrade

  I have a laptop of c55-a-1hc satellite with an i3 - 3110 m and I think to be upgraded to an i7-3632QM which is compatible with the G2 Socket / rPGA988B as can be seen here:
  http://www.CPU-world.com/Sockets/SOC...GA988B%29.html

  My question is: will it work and run ok?
  What I have to change anything else beside the cpu?

  My machine specifications are:

  

  I think that no one will be able to tell if your laptop work properly after these updates...
  The fact is that these improvements are not officially supported by one of the manufacturers of portable... Upgrading CPU is at your own risk and in the worst case the notebook will not using new CPU...

  As far as I know the chipset, as well as the BIOS must support the new CPU in order to work properly... so even if the motherboard / chipset would support the new processor, it is still pending on the BIOS...