Satellite A - wrong screen resolution in games

Similar Questions

• Re: Satellite Pro L300 - screen resolution maximum?

  I just bought an external monitor for my L300. The screen resolution is 1920 x 1080, but the maximum available on my L300 is 1280 x 800. The utility Service Station tells me that all my drivers are up to date - is there a way I can increase the graphics resolution? Any suggestions much appreciated!

  Details: Running Windows 7 Pro SP1 on a satellite Pro L300 PSLB9A - 02K 002

  Hi PeterSouthon,

  Need to unlock the other screen resolutions. Simply uncheck the option Hide modes that this monitor cannot display as you can see on [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo.

  After unchecking this box, you should be able to use the native screen resolution of your external display.

• Re: How to change the Satellite L650-108 screen resolution greater than 1024 x 768

  You just bought a new 108 L650, but I cannot fix the upper to 1024 x 768 screen resolution.
  It should be 1366 x 768.

  Right-click on the desktop and choosing the resolution of the screen only gives you the opportunity to 800 x 600 or 1024 x 768. I can't find anyway to get it to the correct resolution.

  Help would be most appreciated.

  See you soon,.

  Tillman

  Hello

  Have you installed a graphics card driver?
  Please go to page European driver Toshiba and download and reinstall the graphics driver.

  Good luck

• Equium L40 shows wrong screen resolution after the mode 'sleep'

  Hello

  My Equium L40 in restart mode 'sleep' is always a screen resolution greater than when he went to sleep!
  Someone knows what's going on?

  You have an external monitor attached?

  Have you updated display drivers and BIOS?

  It XP or Vista?

• Satellite L500-13F (PSLJ0E) - wrong screen resolution

  I have a problem with resolution in my new laptop Satellite.

  This model has monitor 15.6 "and resolution 1366 x 768. In my book since the resolution is 1280 x 800, which means that on my screen, I see a black box on the right side, and I can't see the bottom of the screen. There is no possibility to change the resolution in the graphics options (all available modes are for a 4:3 display and are lower 1280 x 800) - which is strange - the refreshing rate monitor is 58Hz (?).

  More strange is that from time to time (for 3 weeks, it happens twice) after the opening of my laptop, the resolution is correct (1366 x 768, 60 Hz and availble are all the other modes), but after the reboot, the resolution is wrong once again - even when starting.

  I tried to Flash the BIOS, install new drivers, but the problem remains.

  Prayer for all the advice (and sorry for my English)

  Hello

  As you say the laptop supports the 15.6 screen "(HD) with 16:9 aspect ratio and native resolution should be 1366 x 768."

  I have no idea why your resolution change but eventually it s just a graphics driver issue

  As far as I know that the laptop uses the INTEL GL40 graphics chip is it normal?
  In your case I would recommend GPU driver from the Intel page
  Then, you need to install or update the driver in Device Manager
  Simply mark the graphic card and use the Advanced installation, then pointing the driver files

  In the Intel driver for mobility (in Control Panel) settings, you can also change the image format options
  There are 3 different options: maintain the proportions; full screen (without borders); Center Office check all the

• Satellite Pro 4200 and wrong screen resolution

  OK, so I have an old Toshiba Satellite Pro 4200 and I m running windows xp professional on it and I ve been wondering because many programs do not work on it because of the resolution of the screen I want to know if there is a way to change.
  I know usually you access properties etc but when I try to drag, he does not slide remains at 800 x 600.

  So if anyone can help me on what I d really really really appreciate it.

  I'm pretty sure you don't l l install the display driver. It is necessary to use solutions above 800 x 600 screen.

  The drivers, you can download a Toshiba site but don t forget to look in the * Archives * because your laptop is not the most recent:
  http://EU.computers.Toshiba-Europe.com

• Satellite L500-1TE - wrong screen resolution - 1280 * 800 with black bar

  Toshiba L500-1TE PSLS0E-06J01LG3

  I have a problem with the video driver, because he does not recognize big screen and watch only 1280 * 800 with bar emty black on the right (same here http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=55762 but without luck hapy-end).

  tried to install a lot of drivers and I tried to use the system recovery - but nothing changes with this bar

  vary - vary the rare computer start with good resolution

  Can anyone help?

  Hello

  Are you sure that the right settings has been selected in the Intel graphics and Media Control Panel?

  In my opinion, you should check this:
  Under general settings, it is necessary to choose: + scaling-> scale full screen +.

  Here's a nice youtube video explaining this step:
  http://www.YouTube.com/watch?v=w7LYyIy8cYw

• Satellite P300 - wrong display resolution

  Hello
  I have Toshiba Satellite P300 and my display work stoppage last month, it does not display anything only turn on the light for a few seconds. So I buy a new and that display all but a bad resolution or Idont know what to see photo
  http://ImageShack.us/photo/my-images/64/imag0360ue.jpg/
  http://ImageShack.us/photo/my-images/151/imag0362m.jpg/

  Thanks for help

  Hey Buddy,

  So you replaced the display yourself?

  For me it's like this, you have a bad display that is not compatible.

• On Satellite L855 wrong display resolution

  Series of satellite PSKACR-015010RU L855? 3C123577Q

  After installing Windows 7 Ultimate resolution is 1 024 786. How to pass the system to work with the graphics card Radeon 7670? Thank you.

  At first, I have to say that I hope that you created the recovery DVDs until you have installed the version of the OS. Did you do that?

  > How to move the system to work with the graphics card Radeon 7670?
  It is a rather strange question. There is nothing to change. Question is: have you installed the driver on the right poster?

• Satellite A300-07 - screen resolution continue to change right away after stopping

  My laptop Toshiba Satellite A300-07 has only 9 days. When I put the computer laptop, all loaded all software that comes automatically. In the last 5 days or more, whenever I stop my laptop turned on then again once, settings on the desktop keeps on going up to high resolution.

  I tried to change the display settings, but due to the huge police, I see even the bottom of the page click on apply or Ok, page opens up to what low resolution setting to high. Only and the page will not go up or down - cannot minimize yet to see the bottom click on. For some reason, last night, after I created the system recovery disk, it is back to normal.

  Today, he will not be back to normal at all and can practically use as everything is in hugeeeeee characters.

  I have not downloaded (except for msn and yahoo messengers) any software, but what it comes with it that even when autoloaded.

  Can someone help me how to fix it?

  Try:

  Update the display driver and the BIOS on the Toshiba site.
  Remove any software and the drivers who might be in conflict with the display, for example Dynadock drivers or similar.
  Back up your data and perform the recovery.

  If it happens again on a new installation of Windows, then its likely to be a hardware problem (the graphics card for example).

• Satellite L650: Is it possible to get the higher screen resolution?

  L650-1CH 15.6 ", 1366 x 768.
  ATI HD5650 1 GB

  Passionate about hardware, so please don't feel expected excessive things for me.

  Is it possible to get a screen resolution higher than stock, or better with the color / contrast?

  I was always annoyed how to wash the stock on my watched Toshiba screen. Recently the screen is cracked, so I figure now is the best time to look at the options.

  Google gave me very little information so far. I checked prices on replacement of the screen, with the part about being 60 and part + service with an average of 120, but that most likely leaves me with the same or lower screen quality.

  I hope to find something more suited to the movies / games and in 1600 x 900 if possible.

  Indications as to where I should start my search?

  Hello

  > Is it possible to get a screen resolution higher than stock, or better with the color / contrast?
  Yes, this should be possible since the graphics card should support a higher resolution.

  The laptop supports display TFT 15.6 "(HD).
  You certainly have the same screen size.

  Found some spare parts to the page + + pchub.com

• H satellite L505-13 - problem with the resolution of games

  Hello, I have a problem with the resolution of games, I just that:
  800 x 600 and 1024 x 768
  Yet, I have the latest version of the ati driver and directx 11...

  Windows Dectet my monitor properly (plug-and-play), and my screen resolution works well for: 1366 x 768 and 800 x 600.
  on the other hand, when I start a game I have only the choice between these two resolution: 800 x 600 and 1024 x 768...

  All the games don t fit the full screen and there is always a black area on the right and left.

  Some games (crash)... and I thought it made a link with said that I have only 2 resolution.

  I have a toshiba L505 - h - 13 (PSLS9E)
  my graphics card: ati mobility radeon hd 5145 graphics card
  OS: win 7 32 bit

  I hope someone can help me find a solution
  Thanks in advance

  Hello

  I put t know what games you want to play, but generally speaking, it of also depending on the game you can use screen resolutions. For example if your game supports only 2 screen resolutions, you can only use these resolutions.

  So all you can do is update the driver DirectX and display. Then, look for an update (patch) for the game.

  Good luck! :)

• Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

  Hello..

  I just received my upgrade to windows 7 in the mail and I installed it and all is well...

  But if I run a game that is not in the same as the computer screen resulution is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works very well.

  Some games may be put to the resulution have this computer.

  How can I do then come in full screen?

  Thank you

  Hello

  Have you tried to update the display driver? Maybe you have an older version that is not fully compatible with Windows 7. Just check the Web from Toshiba site to get the latest version:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally for mode full screen in games you choose the native screen resolution of your screen there.
  Check this box!

  And it would be interesting to know in what games this problem exists

• Satellite A200-1AX: Win7 has very limited screen resolution

  ?:| Can someone help me please?

  I have a SCREEN RESOLUTION (1280 x 800) after that I went to w7, before I can get about 1600 x 1280 when I was in very limited vista. I lost my vista recovery disk so I decided to go with w7, but after that I did some installations/updates to update for all my drivers again my screen resolution gives me the size 1280 x 800 maximum.
  Anyone? Please? I need your suggestions...

  -J' have a Satellite A200 1AX (recently moved from vista to w7)
  -Screen: 15.4 "
  -My graphics card is ATI Mobility Radeon HD2600.
  -I just downloaded the latest driver from ATI.

  Please tell me what I'll do.
  Thanks in advance guys...: D
  Jeje

  > Until I can get around 1600 x 1280 when I was in vista
  I can't believe that why?
  Because the screen internal 15.4 "WIDE XGA supports a maximum resolution of 1280 x 800.
  Max which is possible on the internal display, and as a result, you will not be able to choose a higher resolution on the internal display.

  The resolution of the external display may be higher but not the resolution of the screen internal.

• Satellite L500-1WP - higher screen resolution than HD?

  Nice day!

  I use Toshiba Satellite L500-1WP. I bought a new monitor Dell U2711 with max resolution 2560 x 1440. I tried to connect this monitor to my computer using a HDMI cable, the video card identifies the monitor as a HDTV and made max resolution 1920 x 1080 possible.

  Is it possible to do these 2 works as well as the resolution, I need (2560 x 1440), or I have to buy a new computer with DVI-d port?

  Hey Buddy,

  You should check the user manual here, I founded an information that the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16 million colors.

  So for me, it looks like you can use the native screen resolution of your external display t but normally 1080 p should be pretty good. :)