Satellite L500-1TE - wrong screen resolution - 1280 * 800 with black bar

Similar Questions

• Satellite L500-1WP - higher screen resolution than HD?

  Nice day!

  I use Toshiba Satellite L500-1WP. I bought a new monitor Dell U2711 with max resolution 2560 x 1440. I tried to connect this monitor to my computer using a HDMI cable, the video card identifies the monitor as a HDTV and made max resolution 1920 x 1080 possible.

  Is it possible to do these 2 works as well as the resolution, I need (2560 x 1440), or I have to buy a new computer with DVI-d port?

  Hey Buddy,

  You should check the user manual here, I founded an information that the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16 million colors.

  So for me, it looks like you can use the native screen resolution of your external display t but normally 1080 p should be pretty good. :)

• Satellite L500-128 - FN keys do not work with Win 7 64 bit

  Satellite L500-128 - FN keys do not work with the help of the operating system Windows 7 x 64

  Hello

  Satellite L500-128 belongs to the series of PSLJ3E.
  The European driver Toshiba page contains all drivers for this unit.

  Next to the installation of value-added package, you will need to install the Flash Cards Support utility v 1.63.0.4.
  Buttons controls the FN Flash Cards!

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?

  See Re: corrupted iPod classic. If she does not really have a reset set it aside and let the battery completely discharge. It should reset itself when you load again.

  TT2

• Cannot change the screen resolution of 800 x 600. Stuck at 1280 x 1024.

  SCREEN RESOLUTION

  INSTALLED XP HOME, SEEMS THIS 'SCREEN RESOLUTION' TO DISPLAY 'SETTINGS' WILL NOT 800X600PIXELS TO DISPLAY FULL-SCREEN ON MY LAPTOP 12'. STUCK AT 1280 X 1024. UNABLE TO READ THE AGE.

  Help

  Help

  The option is blocked for you to change? Install the latest video drivers. This could help.

• Satellite A - wrong screen resolution in games

  Hello

  I change the operating system from Windows Vista to Windows 7 64 bit home and I download the driver for Windows but when I play games, it seems 1024 * 768 pixels and my laptop has 1366 * 768 pixels.

  So anyone who has a solution to this problem please help

  Hello

  Unfortunately, I think you have to offer more details on your problem as the number of exact model laptop and all the games that you play.

  Important point is that the game must support the native screen resolution of your screen, otherwise, you are not able to use 1366 * 768 pixels. You should check this first!

  Also make sure that this new Toshiba display driver is installed and update your DirectX version.

• Re: Satellite L500-19 X - screen keeps going black

  Hello

  I have a Toshiba Satellite L500 - 19 X and continues to go to the black screen.

  When you start the computer it flashes briefly until start / Boot screen properly before going black right now. Sometimes, the image is displayed correctly for 3 or 4 minutes before also black.

  If you hold down / tilt the screen under a strong light you can see a preview of the ghost of what should be displayed and if you connect an external monitor to the external monitor works fine and you can see a black ghost of what is on the external monitor on the laptop screen.

  I tried to reinstall the drivers, but it had no effect.

  Do you think I should replace the screen inverter Board or just reconnect the connectors screen?

  Thank you very much for your advice.
  Concerning

  Al

  Hello

  First to solve this problem, you must disassemble the laptop.
  I put t know exactly the procedure step by step for the L500 series but this procedure isn't very easy disassembly and you could damage other parts.

  Back to the question.
  It seems that the graphics card is OK and the problem is with lighting.
  Satellite L500 was equipped with a FL inverter Board and LCD joint (no backlight).
  The FL inverter controls the level of backlight screen s and I think that in your case, this part is defective.
  To resolve this problem, he needed to remove and replace the s FL inverter.

• Function key on Satellite L500 causes Blue Screen Of Death

  OK, I have a Satellite L500 and I got it in December 2009. Since I got it, if I ever press the function key the BSOD appears and the computer restarts. I put t in particular use the key function often, but it of just in case I press the wrong button and it s a nice feeling not not to have a button of computer laptop-suicide haunts my keyboard.

  Also if I decide to close the laptop completely and turn it back on at a later date, it of likely that it will be displayed as well. I have no idea as to why this is, but any help would be appreciated.

  Thank you very much
  A. Mcstea

  >... a computer laptop-suicide button...
  :)

  Do you mean the FN key?

• Re: Satellite L500 - cut wire screen

  Please help, when I closed my laptop Satellite L500 I smelled electrical, reopened and the screen is black.

  I took it to a mechanic and he told me that he thinks that the cable/cord that connects the screen to the keyboard has stopped running through the hinges. He actually told me that he had the same problem on the same model specifications 2 weeks earlier.

  He said that without opening upward and looking (which cost $250 immediately!) he couldn't be sure. My warranty missed 6 months ago. Any ideas?

  > Any ideas?
  Is that there is hardware problem and should be checked. I know it's expensive, but you can try to contact other services and see if they can do the same job for less money.

  You can now use your laptop?

• Satellite L500 - 20 X - screen problems

  Hello

  first of all, I would like to apologize for the case that I couldn't be very good to use this forum. I'm new and have never used any before support forum. And English is not my mother tongue.

  I use a Toshiba Satellite L500 - 20 X. For some time, the performance of the screen got worse. All started with interference bands who were there for a second or two and then vanished again. Now, I have to put the screen at an angle to get a decent picture, at all. If I didn't, there is interference stripes all the time.

  What I have gathered, it seems that the display cable is most likely the cause. So I have two questions: do you not think? And, if so, how do I know which cable I need to replace the (possibly) broken?

  Thanks so far!
  Vargskinn

  So I have two questions: do you not think? And, if so, how do I know which cable I need to replace the (possibly) broken?

  As I know there is only one flat cable which is connected to the screen, as well as the motherboard.
  But I can't say for sure that the cable is the troublemaker... it could be the cable problem, but that's just an assumption...
  In any case, I think that the laptop must be disassembled in order to know if it's really a problem of cable and a disassembly of the laptop can be very difficult if you have no instructions detailed step by step.

• Satellite L500 - 19 X - screen turns white (white light)

  Hello
  I have a Toshiba Satellite L500 - 19 X, and my screen is not working properly. When I turn on the computer, the screen turns off, but it gets lightened, it becomes white.
  The external VGA output works fine, I have no problem with an external monitor.

  I already changed the flat cable (Flex) that goes to the screen, but I got the same results.
  Can someone help me? What could be the problem?

  Thanks in advance!

  Graphics card is correct because you said that the external monitor is working properly.
  So I guess that screen internal or the FL inverter is the troublemaker.
  But that's just a personal opinion, I think that you will need to test the two parts

• Satellite L500 LCD replacement screen (PSLJ0A - 01 K 013)

  Hello

  I need to replace the LCD for my Satellite L500 PSLJ0A - 01 K 013, but I have trouble finding a LCD 15.6 "appropriate. I am trying to find online, but it seems that the Web sites that sell screens LCD do not have my laptop model. It will be the same for all the series L500?

  Thank you.

  > Will it be the same for all the series L500?
  I think so. If you compare your L500 with other models (different number of PSxxxx) the difference is available from hardware such as CPU, GPU, ability to drive HARD, perhaps, ports, but in general, the LCD is always the same.

• Satellite L500/00W - gray screen with lines appeared twice

  Hello

  2 weeks ago, I bought a laptop Toshiba Satellite L500/00W and today I was reading something online that this grey screen with lines to come...
  He did so twice already... I do worry...

  This could be the cause? How should I do? This happen to anyone else?

  Thank you
  Lily

  Hello

  I m not L500 owner so I can't tell you if that happened or not.
  I A200 and U400 for my company and I didn t have shown such symptoms in the past

  He signed strange s if the display changes the brightness and display vertical lines.
  It might be a problem of display or something with the graphics card.

  If you see this new symptom then I would recommend connecting the laptop for external monitor to check if the same would be visible on the screen 2.

  If the same would be seen on 2nd screen there is a big chance that and GPU would be affected.

• Equium L40 shows wrong screen resolution after the mode 'sleep'

  Hello

  My Equium L40 in restart mode 'sleep' is always a screen resolution greater than when he went to sleep!
  Someone knows what's going on?

  You have an external monitor attached?

  Have you updated display drivers and BIOS?

  It XP or Vista?