Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

Similar Questions

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Windows 7 Upgrade Advisor does not work on my Windows XP Professional

  Windows 7 Upgrade Advisor does not work on my laptop Windows XP Professional Version 2002 SP3 (Panasonic-CF-30). Is there a reason why?

  One thing that can stop him to run the .net framework.  Please ensure that the latest version is installed.

• Acer Windows 7 upgrade kit does NOT work!

  Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

  Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ------------------------------------------------------

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the system drive, click on remove (DO NOT remove the recovery when it exists)

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• Windows anytime upgrade key does not work

  After trying to upgrade my OS Windows 7 Home Premium to Windows 7 Professional, I received the following message:

  
  
  "Enter a different upgrade key
  The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade.  Enter a different key. »
  
  
  Just to be sure, I tried upgrading several times, but got the same message.
  Due to manufacturing defects, my laptop had to be repaired three times.  The motherboard has been replaced twice, the hard drive has been replaced three times and the processor once.  In fact, just a year last month, it still does not properly.  I bought the Windows Anytime Upgrade [upgrade to Windows 7 Professional to Home Premium] at the same time that I buy my laptop. Each time, except this time, I got to spend my OS.
  The operating system on my laptop is now Windows 7 Home Premium [SP1]
  Another thing, I bought this laptop until I moved to the United States to Asia.  If this may have something to do with the problem that I am facing?
  In any case, I hope you can help.  It is difficult to really buy a lemon manufacturing refuses to stand behind and now having this issue, where I can't upgrade the OS that I bought.
  I hope you can help.
  Thank you in advance.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and maintenance records

  and the difficulty of corrupted data, the tool is listed under kb947821 we find at the following link

  http://support.Microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  http://msdn.Microsoft.com/en-GB/academic/bb250622.aspx - License of MSDN AA

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• LR does not open in mode full screen.

  It is probably trivial, but it makes me crazy. I always use LR mode full-screen. But whenever I open it, it always opens in the mode window collpsed. Never the way that I closed it fullscreen. This is intended to, or is there a setting somewhere that I just haven't found?

  I assume you are using a shortcut on the desktop to start Lightroom.  Examine the properties of this shortcut.  It should be an option to "expand".

• Satellite L500: WLan is de-energized and does not work most of the time

  Hi all, I have a satellite toshiba L500 running windows 7. iprimus have used wireless internet, no problem for a few weeks before that, used it via an ethernet cable as I didnth ave a wireless modem. my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  So I rang toshiba... and they got forced to go in device drivers, cards, and then network and disable, actually uninstall the wireless drivers and then reinstall... and it worked... Finally... (forgot to add with the confusion iprimus someone had reset my passowrd and I had to configure to the laptop...)

  Anyway, after all of these calls, I did a full restore of the computer laptop, all deleted and reinstalled everything and then reinstall the modem. This time in the configuration of the modem, he told me the wireless network adapter was unplugged and let me only implemented via ethernet...

  now earlier today, I had the internet... but he dropped randomly... pages Web will go slow, sometimes it will reconnect, sometimes he used. now I thougbht could try and uninstall and reinstall the modem again, s soul mistake and this time, can not get the wireless at all.

  Ive google to see if others have had this problem... and seeing what others has written, I went into my battery settings and checked the WLAN will not in mode 'sleep', etc., and ive also checked everythings active. Ive no idea what do, or iprimus and Toshiba will give me answers, both companies are just to blame each other lol
  so I have
  It doesn't seem to be my laptop, as all the lights are on modem... and iprimus keep telling me its not record not not with them (disconnects) so my wireless. Although every time my laptop has left internet, so would my iphone of bfs were testing us and so did my other laptop which is partially drunk but couldn't normally always connect to the net... so as to tell me it is a problem of modem... Ive no idea what to do... and can not keep it via ethernet on the bench in the new House ive, as with 2 children less than 3 years moved in, is asking for trouble...

  someone at - it suggestions?
  Thanks in advance
  :)

  > my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  That s the best way to get rid of a client who has a problem, I know that those people who don't say, this is not my problem it problem computer laptop s ;)
  I think that the guys running out of ideas.

  However, first try an update of the WLan driver;
  NEST WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  If new BIOS BIOS update would be available.
  You should also check the advanced settings of the wireless network card.
  To do this, go to Device Manager-> properties-> Advanced tab WLan card.

  Here you can choose some settings that would improve performance

  Good luck

• Satellite S70-B-10v - MMORPG online game does not work smoothly

  Hello.

  I have an S70-B-10v type and im frustrated abit because I play this MMORPG game online and is not fluid.

  Care about this game is average in virtue of what can do this trick:

  + Pentium 4 2.8 GHz or comparable CPU +.
  RAM: 1 GB for XP; 2 GB for Vista/Windows 7 +.
  + nVidia 6800GT with 256 MB of RAM or similar graphics card +.
  + Windows XP with SP3, Vista or Windows 7 +.
  + DirectX 9 compatible .0c sound card +.

  My office which is as well under the Tower card can do better with this game...
  My problem is... game is not fluid as should be.

  The internet connection is via wifi, on desktop pc is running smooth.
  But on laptop?
  I have to go to the min spec to be fluid?
  I want to say... I paid almost 1000 euros on a laptop computer to play a game with min req?

  I put all the stuff high-performance... then where is the problem?
  Boost is thus activated.

  Any ideas?
  Kind regards.

  The configuration of your laptop is not known to us, and we do not know what software is active in the background. Of course, this can slow down your laptop.
  Before starting the game don't forget that all unnecessary applications and processes are stopped.
  Do not let Windows install the updates in the background or your antivirus application to scan the HARD drive.

  > I put all the stuff high-performance
  I can imagine that some background process may be responsible for this.

• Windows 7 - games don't work in mode full screen - proposals of Solution

  Then you have windows 7 and games got to black borders on each time... don't have don't not afraid is not your Windows 7, something's not going I don't know what, but everything the world has this problem... my say, it's games = vista/xp internet win 7

  When we bought windows 7 we screwed...

  my opinion... but if you find a way to fix it we don't get screwed and you'll be a hero

  Hi mate

  I m not a hardcore gamer, but occasionally I m playing games on my laptop Win 7 preinstalled.

  Here is my proposed solution:
  Why you n t install Win XP in Windows 7 mode?
  This would allow to run games that are not fully compatible with Win 7 in Win XP environment!

  Here is an interesting page of Microsoft:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Try it

• Video playback dynadock U3.0 does not support the mode full screen

  Hello

  I bought a U3.0 Dynadock and use it with a Zenbook UX32V and an iiyama external display with a resolution of 1920 x 1920

  Everything works fine but the video playback in full screen - no matter, I use the flash player, VLC or WMP. Video playback works well in window mode, but when I switch to full screen, just a black screen and the cursor of the mouse appears.

  Interestingly, when I press the right mouse button to open the context menu all in video playbyck, video is shown both that the context menu has the focus.

  I've updated to the latest display drivers, but it did not help.
  Does anybody know a solution for this?

  Thank you

  Martin

  Hello

  Check the display driver newest Dynadock and so update the driver from this page:
  http://www.DisplayLink.com/support/downloads.php

• Roller Coaster Tycoon 2 does not run in mode "full screen".

  I tried to change the compatibility mode for each of them and also disabled the themes and as an admin, my drivers are up to date and until the day I'm under wiindows build 7100, one know how to make the racing game in full screen, so there is not 2 inches from each side black?

  Windows 7 RC is build 7100?

  Anyway, if it is black on the sides, have you checked if the resolution of the game screen setting corresponds to your screen resolution?

  What I wanted to say, that if you use Windows 7, it is perhaps a compatibility problem, try the XP Mode Beta (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0e8fa9b3-c236-4b77-be26-173f032f5159 ) - beware, the download is about 500 MB.