Satellite A10 - random stop

Well it's not really an off chance, it tends to happen when I run a check of the register as a deep anti virus check or register. Mech, when it comes to search the registry that it stops.

Every moment (I ve had it 3 times in 2.5 years) and then I get the blue screen and a recovery from a serious error message, more I m running like a bit of a dog... extremely slow start etc, but once running its ok but still slow I'm low on (I have 512 MB) of RAM or what?

Any suggestions would be very useful, congratulations.
Thomas

Hello

In my opinion it is nothing strange that the unit runs slowly after long period of use. Normally the 512 MB of RAM should be sufficient, but in my opinion you should make up a cleaning of the operating system or even install it again. On this way the unit will be own pre-installed.

Please also use tool Defragmenter disk and this way all the stuff on the HARD drive will be on the right. How to make a household there are a lot of different stuff.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A200 - random stop

    TOSHIBA SATELLITE A200, with Vista operating system. Because of incompatible with several software. I change my OS with Windows XP2. There is none in 1 year. problem. During these months, I have a problem. My computer is shutdown it self when start-up or running randomly

    What happens with my computer? I scanned it and no viruses. Help me please... Thank you to

    Hello

    may be the most possible reason is overheating. Have you ever done cleaning with the jet of compressed air?

  • Satellite P755 random stop problems

    Hello

    I just bought my laptop a few months ago and were not really use it much since.
    So there no more than 100 hours of work.
    A few weeks I started which meet this strange problem with random closure.

    There are no rules when it happens, sometimes, it stops after a minute of work and sometimes it stops only after a few hours. He goes to a complete close, but sometimes he goes to hibernation.

    This happens as well when the charger is connected and when it is not connected.
    So, using my laptop is currently quite impossible. Also guaranteed is not an option for me as I have bought abroad.

    I read somewhere that someone had a problem with the power button and that he "pressed" it self automatically, and yet one thing that happens to me is that sometimes computer laptop itself only implements opening lid don't not by pressing Start button / stop at all.

    So, can it be this issue, and if it is what is the best way to fix it?

    So, please help with ideas or if someone had the same problem before, I really want to use my laptop and it is thus impossible.

    Thank you

    Post edited by: ppero17

    Thank you very much for the comments.

  • Satellite A200-1QK stops randomly

    Hello.

    Well, lately, my computer randomly stops after a while. For some reason, I can't activate it for 1 or 2 minutes when what is happening. I wonder, is this a battery problem? Or y at - it something worse than that?

    Thanks in advance.

    I put t think its a battery problem!
    For me, it looks like an overheating problem.

    If the temperature rises to the critical level the laptop stops automatically to avoid overheating of the material!
    You will have to wait until the temperature goes down and after about 5-10 minutes you could restart the laptop.

    I think the laptop overheats because cooling cool don t properly hardware modules. Because of the dust and debris inside the laptop don't twist not fans with maximum performance and this leads to a higher temperature.

    In my opinion, you should try to clean the fans using a jet of compressed air!
    Most computer dealers offer these professional tools.

    Best regards

  • Satellite A10 dies after the power LED blink

    Hello

    I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

    It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

    I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

    It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

    Thank you for your help.

    Andreas

    Hello

    You description is very long and detailed and it of still not easy to say what's wrong.
    Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

    So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

  • Satellite A10: Cannot recover system with recovery CD

    Hej everyone!

    I was struggling with a strange problem lately, I can not understand yet, so if anyone has any ideas so pls...

    I have 2 laptops Satellite A10. I lost the CD of recovery to one of them, so when I tried to reinstall the laptop I decided to use the other one recovery CD to do that because they are the same... at least I thought they were...

    I repartitioned the laptop with fdisk and made the partition active, formatted and then when I boot with the recovery CD, it began, began to dump files, but about 20%, he just say 'impossible recovery' or something "partition is not active" and restart. When I rebooted, it saw that the format of the C partition was gone (he said unformated or damaged partition).

    Now, I tried 1 partition, 2 partitions, FAT32 and NTFS, no joy... I think you must have some special configuration of partitions to ensure the success of the recovery, but I don't know how.

    I have not tried to reinstall the other laptop with the recovery CD because I'm afraid that it's too bad...
    Can someone help me pls?
    BR
    / Linus

    Hello Linus

    Before you begin the recovery procedure, it can't do anything. Simply start the recovery procedure. I don't really know why the recovery procedure stops after 20%, but please do not prepare HARD drive before using the recovery procedure delivered.

    If I remember well you have two options before the start of the recovery procedure: standard and expert mode. If you use the standard mode is wiped the entire HARD drive and recovery image will create a partition (the whole HARD disk capacity). Using expert mode you can create a clean partition and later in management of the disks (under WXP) create the second logical partition.

    Please try both options. If the recovery CD is not damaged I really don't see any reason why the recovery procedure can be done successfully.

  • Satellite L500-1UU - stop frequently

    Hi guys,.

    My new Satellite L500-1UU just randomly stop whenever I run all games (for example mass effect 1 and 2 war modern etc...) will be last only 3mins max then stop and even on the internet normal surfing. I have already send to service center authorized toshiba but on no occasion always same problem.

    I'm really really upset and frustrated. I just bought this in less than 3 months if I'm sending this even once, I don't know if they fixed it is good or not. Informed please help. Thank you

    I3 2.13 ghz
    ATI 5145
    hard drive 320

    Hey Buddy,

    You use the factory settings or you have installed your own version of Windows? Normally with factory settings (preinstalled Windows from Toshiba) everything should work correctly because this image is pre-tested by Toshiba. Otherwise, it might be a hardware problem.
    If you need to reinstall your laptop using the Toshiba recovery disc.

    Which driver you use display? You may use Toshiba drivers.

    In addition, it could be an overheating problem. You should try to clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.

  • Satellite A10-S177: flashing main indcator

    I have a Satellite A10-S177 that won't start. When the plug by hand or the main battery indicator flashes amber color and nothing happens when you press the button.
    It seems to be a pace in the 2 flashing flashes, 2 flashes 3 flash remains for a second then 2 blinks then stop for 2 seconds and so on. I checked the power supply and I have 15 volts output.

    Can you help me?

    Thank you

    Hi John,.

    The sequence of flashing normally indicates a hardware failure in Notepad. Unfortunately, you will need to have the ckecked from the unit by an authorized Service partner to diagnose what exactly is the problem.

    Kind regards

  • Satellite A10 BIOS update needed!

    Hey guys, my Satellite A10 guard restart whenever I stopped him. I talked to my friend and he said there's a BIOS problem, and I should be updated. So I downloaded the latest version of Toshiba and run it. It told me to insert a disk. This wouldn't be a problem but my A10 is not a floppy drive then how am I ment to upgrade the BIOS of my computer without a floppy drive?

    Hello

    For your model of laptop ago just traditional BIOS update and you need a USB FDD for it. In my opinion, you can check on ebay or somewhere there FDD cheaply or you can contact the Service partner.

    It takes about 10 minutes for the BIOS update, and you can do it alone. It is very easy. As I said, check if you can find a used floppy drive. It cannot be expensive.

    Also, you can borrow one from your dealer or your business!

  • Satellite A10-SP100: can I manually enable the CPU fan

    Hi everyone, I need help with that.

    My active cpu at 60 ° c, fan but his stop at 50 ° c.
    The thing is I want my CPU fans to stop at 40 and not 50, ' coz it off my pc when I do something heavy (game game, etc)

    My question is... it is a way to manually activate my fan and then turn it off when it reaches the 40 ° c approximately
    I have a Toshiba Satellite A10-SP100 wih Windows XP Pro.

    Thank you very much!
    Pablo

    Hello

    What you can do is to change some parameters in the Toshiba Power Saver.
    I assume you are using this tool and it s preinstalled on your system

    OK, you can find the Toshiba Power Saver in the control panel.

    Access the GST and chose the details of you power mode.
    Then switch to the power saving (second tab) and set the method of cooling for maximum performance.

    This should increase the fan speed and cooling performance.

    Concerning

  • Satellite A10: WinXP SP2 & problem sound :(

    Hello!
    I have laptop Satellite A10
    System - Windows XP and SP2
    The sound does not work :(
    Has implemented the last driver - http://support.toshiba-tro.de/tools/Satellite/sa10/win-xp/sound-xp-512013542.zip did not help :(
    Everything works without SP
    Help me!!!

    Hi sm,.

    When you want to download a driver there is a document entitled information update Microsoft Windows XP SP2. All right, I see the update for Driver Sound is not necessary for your A10.

    Check sound and Audio Devices Properties all settings anyway.

    Please also check your Volume control side dial on the front of your laptop. :)

  • Satellite A10: modem port conflicts - error: 633

    Hello

    I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

    I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

    Hi guys

    I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

    Check this document:

    * + Error message: the Modem is not installed or configured for + *.
    http://support.Microsoft.com/kb/q191444/

  • The country on Satellite A10 S203 modem settings

    Hello

    I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
    I tried to connect to internet in Germany, and I couldn't change the country of the modem.

    Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

    GRTS Frank

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

    If all goes well it will help you. If this isn't the case, please write again.

    Bye and good luck!

  • Satellite A10 S103 - how to reset the Bios password

    Hello world

    I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

    Please help me

    [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

    + You can not remove a BIOS password yourself, if you forgot it. +

    + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +

  • Satellite A10 problems...

    Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

    Can someone tell me what is the problem?

    Kind regards... Hans

    Hello Hans,.

    Sorry, but what does not work?

    You get an error message during playback?
    Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

    You may have a game for example?

    Good bye

Maybe you are looking for

  • Why my address book has been altered in the new version 38?

    There were many double jobs with different addresses. Too many names of people I've never heard of. It took several hours to check and delete,

  • Cannot import a brand book .json file (a file HTML BM or BM Chrome)

    Started FF with no plugins and he locked up tight when you try to import a json file has recently made my PC who died.Did the same thing with less desirable HTML bookmarks or import Chrome bookmarks. This behavior of shit years and followed me across

  • How can I get rid of the my search toolbar?

    I am running Windows XP and Firefox 18.0.2 I downloaded programs for connecting wireless to an android phone. Later, I noticed the "My Search" toolbar. I don't want that, didn't demand and can't see a way to get rid of him.

  • You must format the F: drive until you can use it >: O

    I have a sd card and its worked many times on my windows vista home premium 32-bit. I just recorded some videos on it and connected it to my computer. Now its saying it needs formatting! I have so many pictures and videos on my card sd and need to do

  • Vista 64 for Vista 32

    I just installed Vista 64 bit and not 32 bit. What is the difference?  Can I change in 32-bit without causing damage or loss of information? Thank you