Satellite A10: WinXP SP2 & problem sound :(

Similar Questions

• Satellite A10: Virus CDRW problems?

  I have a TSatellite A10 Celeron2200 with CD - RW. The laptop is 6 months old. I wanted to copy a CD with the data, but it was impossible. I took the laptop to the store where I bought it and they said that they fix it and told me that he has a virus named Win32:Parite who has eaten the memory and because that Cd burning fails. But the problem persists! Now I download from the net 3 antivirus with anti-spyware anti-Trojan software and different. They found nothing suspicious. But the problem persists! And now the computer is worse: he do not start WinXp!

  Thank you!

  P.S.:do you know what the key is to move in the menu of the bios at startup of the laptop?

  You enter the Bios by pressing the Escape key after turning on the machine

• Impossible to send E-mail on Satellite A100 WinXP SP2

  Hi all

  just found this forum.
  I have the Satellite A100 Windows XP sp2 and I'm unable to send e-mail to certain addresses (yahoo among others - recipients rejected by the server).
  After several long sessions with my ISP tech (ntlworld) support that seemed to be the best advice that all is OK with my settings on the server and I need to look for a solution elsewhere.

  I was using Outlook Express as my email application so tried Mozilla's Thunderbird to see if this helped - no improvement, unfortunately.
  Windows updates all installed. I approach approaching the limit of my knowledge, help/advice or pointers in the right direction is greatly appreciated.

  Hello

  Maybe is a problem of the Outlook profile.

  Make a new profile in Outlook under Extras? E account Mail with information from the ISP and verify the Netware properties.

  I hope this is a help.

  By

• C3030 WebVPN and IE 6.0 WinXP SP2 problem

  Hi all

  I noticed that WebVPN used to access Windows shares does not properly more with IE 6.0 on Windows XP:

  How to reproduce it:

  -Connect you on the WebVPN

  -Enter a Windows access, such as \\server\share share

  -Access a file

  Now usually, when you left click on a file, we must download this file. But with IE 6 on Windows XP SP2, the attached dialog box appears. If you click on 'OK', the file is downloaded (and you are NOT disconnected!). If you click Cancel the download is cancelled. It is a VERY misleading dialog and I am very surprised that no one was complaining yet.

  (right click, "Save as...") (' Works)

  Everything works fine when using IE 6.0 on Win2k SP4 or IE 6.0 on Win2k3 SP1, or when you use the browser Firefox 1.0.4.

  This could be a problem with a patch from Microsoft, because it worked before. As I do not usually of IE, I do not know after patch that MS he has stopped working...

  News for our VPN:

  Type of VPN concentrator: 3030

  Software Rev: Cisco Systems, Inc. / VPN 3000 Concentrator Version 4.1.4.Rel 28 April 2004 16:22:08

  Please confirm this problem. Is there a workaround to avoid this misleading dialogue box?

  Concerning

  Mathias Rufer

  University of Neuchâtel

  How about the upgrade for V3K Image?

  Try again after the upgrade of 4.1.4 to 4.7.

  Thank you.

• Satellite L10 (WinXP SP2): conflict of controllers PCI device

  Hello
  On startup, I get the following from the BIOS error message:

  "Resource conflict. PCI on the motherboard. Bus: Device function 02:01:00 "

  I can't fix it in the settings of the BIOS as those who are really rare.
  If I press 'summary', the loading process continues without further problems.
  The Windows Device Manager sees not all conflicts. The device mentioned in the error message is represented as a 'Universal Cardbus controller'. It reappears if I try to remove it.

  Sometimes (for example in safe mode) instead of this device Windows detects the "Texas Instruments PCI 1410 Cardbus controller" Device Manager Then the BIOS error message disappears, but once I reboot in normal mode the "universal Cardbus controller" is displayed again.

  The real problem is that the computer crashes often enough, who have not appeared before. I know, maybe that's another reason, but I'm trying to fix this first, because it is an obvious problem.

  Is there some configuration options of the utilities that provide deeper BIOS?

  > Are there some configuration options of the utilities that provide deeper BIOS?
  N °
  Sometimes, the inserted PCMCIA card could cause these error messages!
  Please check this!

• I need a driver for my Satellite A10 131

  Please, help me. I'm looking for a driver for my laptop, with the name of the model Satellite A10-131. I can't find the right on this page!

  Hello

  I guess you are looking for a driver audio XP.
  I found this driver on Toshiba Europe page!

  You must choose the good laptop, dude!

  In the form of pilot please choose this:
  Laptop-> Satellite-> Satellite A10-> WinXP-> sound driver

  All that s. download the driver, install it and enjoy your life ;)

• Satellite A10 problems...

  Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

  Can someone tell me what is the problem?

  Kind regards... Hans

  Hello Hans,.

  Sorry, but what does not work?

  You get an error message during playback?
  Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

  You may have a game for example?

  Good bye

• Problem with booting from a cΘdΘrom-Satellite A10 - S513

  I have a laptop, Toshiba Satellite A10-S513, who does not want to start from the CD.
  To crystallize the problem, when I want to move the arrow (right or left) to access the CD-ROM icon in Start menu, nothing will be selected and it starts automatically from the HARD disk. I tried to change the startup configuration, but I couldn't because the choice of start-up has been grayed out, although I use the account controller BIOS.
  What should I do to enable booting from CD, taking into account the fact that I had done the CD several times starting.
  A few tips:
  I upgraded the operating system win XP Home to XP Pro and then installed Service Pack 2.

  Hello

  Is there the same situation if you try to boot from the CD drive, hold the C key to the start-up of unit?

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• PEAP EAP/TLS, PORTEGE with WinXP sp2 Tablet Edition problem

  We have: Rev AiroNet350 Cisco with WPA - EAP: Freeradius with EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2 configuration.

  This problem discribed in http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
  Perhaps to solve this problem we need a fix (http://support.microsoft.com/kb/885453/en-us), but microsoft support said to contact the laptop manufacturer.
  Can someone help me with this problem?

  Hmmm I m not an expert in this area, but it seems that the MS OS update is necessary. (I hope)
  The preinstalled Windows operating system is a simple OEM version and generally all updates should be possible. However, if MS guys told you to communicate with the manufacture of the laptop, you can contact the maintainer authorized Toshiba in your country for details.

  But I studied a bit on the net and found this site useful:
  http://SearchNetworking.TechTarget.com/originalContent/0, 289142, sid7_gci945257, 00.html

  1. 802. 1 X is based on communication between your router and a RADIUS authentication server. If you use WEP, WPA or WPA2 with dynamic keys, 802. 1 X debugging following tips may be useful:
  a. reintroduce the same RADIUS secret in your wireless router and the RADIUS server.
  b. configure your RADIUS server to accept the request of the RADIUS of the IP address of your router.
  c. use ping to check the accessibility of router-server.
  d. package watch LAN account to verify that RADIUS and answers queries are fluid.
  e. use an Analyzer like Ethereal Ethernet to watch RADIUS success/failure messages.
  f. for XP SP2, turn on Wzctrace.log by typing "command netsh ras set followed * activated.

  2 if RADIUS is flowing but are rejected requests for access, you may have a problem of incompatibility or credential X Extensible Authentication Protocol (EAP) 802.1. This setting depends on Type EAP. For example, if your RADIUS server requires EAP - TLS, then select 'Card chip or other certificate' of your adapter wireless network properties / authentication Panel. If your RADIUS server requires PEAP, then select "Protected EAP" of the adapter. If your RADIUS server requires EAP-TTLS, then you will need a third-party wireless like AEGIS or in Odyssey client.
  Make sure that this specific EAP properties match for your adapter and the server, including the server CA certificate root trust Server domain name (optional but must match when it is specified) and the customer (EAP-MSCHAPv2, EAP - GTC) authentication method. When you use PEAP, use the control panel to 'Configure' CHAP to prevent Windows from automatically re-use of your connection.

• Satellite A10-wireless problem

  Hello! I have the Satellite A10 with integrated wireless Windows XP Professional. I was trying desperately to make wireless communication integrated works, but without success. Windows has found two "Base system device", and I suspect that one of them is the wireless. I tried to install different wireless drivers that are supplied with the CD for the laptop, but so far without success - Windows refuses to accept these drivers for unknown devices. No idea what I am doing wrong? I downloaded the latest drivers wireless for A10, but nothing has changed. One of my friends suggested that the BIOS must have a setting to toggle wireless, but I couldn't find this setting in the BIOS. Any help would be greatly appreciated!

  Hello
  Initially, you are sure that your computer has preinstalled absolute Wifi?

  To be sure about you could give me the complete Modelnumber or serial number.

  I am so lucky to find the installed equipment.

  THX & bye

• Problems about my mouse usb (Satellite A10)

  Hi all!
  To easily write my thesis, I bought a Trust friend mouse to use it on my Satellite A10. When it is connected to the usb port, the mouse is recognized by windows, but I can move the pointer only vertically. Mouse instructions say to disable the touchpad in the Bios, but I don't know how. What is a possible solution? What can I do?
  Thank you!

  Hello

  Start your laptop and the meadows to the bottom of the ESC key. After that, you can see statement you just inside the BIOS with the F1 key. Check please if you can find the settings for the pointing device. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

  In this case, you can use the internal and external mouse at the same time. I would like to know if it works properly. ;)

  Good bye

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• Satellite A10 - lsass.exe constantly reading & writing HARD drive

  Hello!

  Two weeks ago, I asked here a piece of advice from my Satellite A10 has bombarded me with messages on "bad clusters" and "not being able to write this or that" on my HARD drive. I thought that my HARD drive was too old and bad functioning, and maybe it should be replaced.

  Now, I know that the cause of my problems is Windows XP.
  As soon as he starts lsass.exe this horrible process is constantly read and write something on the HARD drive.

  As a result, it keeps my HARD drive so busy that all programs that I use can not work properly: when they want to write something on my HARD drive it must wait and wait. And I think this incessant and door reading wrote on the poor HARD disk.

  I googled for a solution (it seems that there are other victims who are unable to get rid of the unwelcome lsass.exe) and I tried to prohibit files indexing and system recovery but these solutions do not work for me. Is there another remedy known to this naughty lsass?

  I have Windows XP Toshiba Recovery Disk and lately this lsass were so widespread that I can not download updates for XP SP2 or SP3. So, if there is a good solution, it must be for the Virgin XP SP1...

  Help, please!

  Hello

  Lsass.exe belongs to the Windows operating system and it s a Microsoft file!
  It is a path to the file: windows\system32\lsass.exe

  I found these details:
  + "lsass.exe" is the local security authentication server. It checks the validity of the user on your PC/server logons. It generates the process responsible for authenticating users for the Winlogon service. +

  I put t think that the file can be removed or should be removed.

• Satellite A10: RGB Port is not installed - can not use external display

  Satellite A10 the RGB PORT is not installed & cannot be used as external display. I tried to install the communication or COM 1. interrupt code. What are the possible solutions?

  Hello

  What did you mean by "not installed"?
  Generally, you don't need to install anything. You don't need any drivers for this port 3.
  Windows XP drivers should work properly.

  Please check device manager if there are errors or yellow exclamation points.
  If the problem occurs for a short time, you can try to use the WinXP restore tool.
  This tool will reduce the BONE until the start.