Satellite A100-495 - Intel 3945abg wireless network card cannot find wifi networks

Greetings,

I have some problems with networks wireless on my laptop Satellite A100-495.

The problem is: my wireless adapter (intel / pro 3945abg) doesn't seem to find wireless networks. If I portable place very close to my router wireless (such as 1 m) - connection can be established. If I move away (~ 5 m)-no connection or 'very bad' quality and constantly broken. Other notebooks I've tried still have "very good" quality at the same range.

This happens with other routers as well. And I can not any sign of wi - fi in my Uni (my colleagues have no problem with their machines).

I tried to play up with some parameters. Reinstalled adapter. Downloaded the latest drivers. Nothing helps.

A tip? Thank you in advance.

Hello

Something like that happened to me a long time ago.
I used the Wlan configuration option to own Windows. For several months, I use the Intel Proset configuration utility to establish the WiFi connection!
It works!

In addition, I have disabled the power Wlan option in the Wlan card properties save and adjust the intensity of the signal at top. I remember, in the advanced properties, you can find the 802.11 option preamble. The value is Long and short on my laptop.

Hey dude... Check it out.

Tags: Toshiba

Similar Questions

  • Satellite A100-784 - Intel PRO Wireless 3945ABG off randomly

    Hello

    I have Toshiba Satellite A100-784 with Intel PRO Wireless 3945ABG wireless adapter.
    Today I was working with my friend on some project connected on his wifi sharing internet connection on Toshiba Satellite A100-510.
    After a while I lose the internet connection and I see that this blue icon is no longer in the test system.

    I try to use Toshiba ConfigFree but it was impossible to open, so I try to open the network connection of the control panel and after a period of time the network connection has been accessible and I saw that this network adapter is disabled. I try to activate three times but nothing.

    After rebooting, everything was ok and wireless adapter is turned on and ready to use for the next 10 or 15 minutes.
    First disable comes after two hours. I use Windows XP SP 2.

    The problem is that I have to restart my computer everytime where I lose internet connection (WiFi is turned off automatically).
    Everything is blocked its very hard to access the settings of network or toshiba configfree

    Thank you

    Try this:

    Update the BIOS of the laptop
    Update driver Intel Wireless LAN
    Use static IP addresses, instead of dynamic (DHCP)
    Temporarily disable your firewall software
    Update the Firmware on your Access Point

  • Satellite A100 - 02 M - missing wireless network adapter

    Hello

    My wireless was working fine yesterday, but today when I turned on there is no wireless signal.
    The switch is on, but no light on.
    And the wireless card is missing from Device Manager.

    Does anyone have any ideas how I can reinstall the Please?
    I don't know what type is the adapter...

    It's a Satellite A100 - 02M. Thank you

    Hello

    Satellite A100 - 02 M seems belongs to the PSAANE series and the Atheros WLan card driver should be right.

    The latest WLan card driver can be found here:
    http://APS2.toshiba-tro.de/WLAN/

    See you soon

  • Satellite A100 - Upgrade Intel for 5300AGN Intel 3945ABG WIFI card

    Hi all

    I own a satellite A100-383 PSAARE. I want to upgrade the wifi card, like the one it is installed right now (PRO/Wireless 3945ABG), does not all the speed, the line can achieve (100 MB to the bottom). Anyone know if the map intel 5300 AGN is compatible with my laptop. If not I would appreciate a lot of suggestions.

    Thank you

    Don t think that someone can give you an appropriate response since the compatibility depends on the BIOS
    If the BIOS would be compatible with the new WLan card, then you can use it for you

    The point is that motherboards is able to manage the cards WLan miniPCI module is just plugged the miniPCI slot and its removable
    So there is just one question about BIOS support and I m afraid you will need to test this at your peril

  • Satellite A100 - 495 (PSAA9) - CPU and GPU upgrade

    Hi all

    I have a few questions.
    I have a Satellite A100-495 with 2 GB of Ram, Core2Duo 1.83 GHz (2 x; T5600) and an NVIDIA Geforce 7600go.
    I want to spend the CPU and the GPU. Is this possible?
    I don't want to do. I am looking for a store (if possible in Germany) that can do this.

    If its possible, what it costs? And what store can I speak?

    If this is not possible-> why? It is fixed; It getting too hot?

    What solution do I? I don't want to buy a new laptop.

    Kind regards
    Dave

    Update CPU and GPU on laptop computers is complicated enough or is not possible. At first, I must say that GPU is part of the motherboard and graphics card can not be upgraded at all.

    What about the CPU upgrade? Toshiba authorized service providers will not do that and the CPU upgrade is not supported. Few people on this forum have talked about CPU upgrade, but for me the risk is too high. All hardware components are adapted to the work well together and also to reduce the risk of damaging the material. The BIOS is also suitable for the specific hardware configuration. The values of the fans are also tested and there is no risk of overheating.

    Change CPU, you will get no more powerful laptop. Modern processors are powerful enough and a few MHz more won't do anymore difference. What you can do is to increase the RAM to the maximum level - 4 GB. That s all what you should do and your laptop runs a lot faster.

    Also be careful on the configuration of the operating system. This will also help make your laptop faster than before.

    By the way: for operations you need more power? What you want to do with your laptop?

  • Satellite A100-495: strange starting problems & freezes

    Hey guys.

    I recently got my Satellite A100-495 back from repair - it had a power problem (no led was flashing and it does not start of course). They told me that the motherboard has been renewed.

    Now, I have the following two issues:

    (1) it freezes suddenly sometimes in windows after 1-2 hours of operation without problems and I have to hold the power button for a few seconds restart

    (2) I press the power on button, LEDS are underway but the screen remains black, sometimes becomes gray, hard drive makes noise, fans going on but it just does not start, do not show anything. After some tests, I have to start but once again crashes after a couple hours of functioning properly.

    Can someone tell me what is the problem here?

    Bad memory (RAM) can cause this.

    If you can get it to start, test the memory with Memtest on a bootable CD. www.memtest.org

    Otherwise, try the combination of the different memory card. If you have 2 sticks of memory, try with one stick, then try the other stick, try different locations.
    Often the memory pins can oxidize and cause problems. To clean the pins, use a pencil eraser/rubber and rub the pins of module memory.
    Be careful when you handle the memory, you can zap easily memory with static electricity. To make sure that you are connected to the earth when the memory handling.

  • Satellite A100-495 - installed 256 MB, but 64-bit technology?

    Hello

    I read in a forum that the map graphic of this laptop a geforce go 7600 is. So now, here's the problem. In another forum I read that some graphics from nvidia with 128 MB cards have a 64-bit technology. So now, I want to know if this card in Satellite A100-495 with 64-bit technology?

    It would be nice if you answer and give an experience with this laptop.

    MFG

    PS Sorry for the bad English.

    Did you mean graphics drivers with 64-bit technology or the graphics chip?
    The different Geforce graphics chips are supported values of up to 256-bit
    As far as I know this laptop with GeForce Go 7600 Code name G73M graphics controller takes in charge a time memory 1000 MHz 128-bit memory interface.

  • How to Exchange screen cracked on Satellite A100-495

    Hi all

    My sister gave me his Satellite A100-495 to repair broken screen. Now, I am looking for an instruction open Notepad and replace the TFT, but I can't find one?
    Someone who could give me a link?
    (And Yes, I know not to risk... ;-))

    KR, komo

    Dear KOMO

    Please don't get me wrong but replacing the screen is quite complicated, and for that you need some manuals with accurate description how do. Unfortunately this document isn't public and you do not download.

    So the question is what to do now. As Akuma has already written you can Google around and maybe find something, but you have to understand that everything you do is at your own risk. Maybe you should seek professional help. It is better to pay a little bit and it will be well and properly. No you don't have to do this a Toshiba service.

    Check all possibilities and try to find the best deal.

    In any case, good luck!

  • wifi card cannot find all networks

    It does not work! I've tried disableing the * bleep * thing, but then my wireless card cannot find all of the networks in range. After that, I uninstalled the AC Tool. the same thing. I'm really running out of patience with this boatware! Why couldn't they just leave windows to manage networks and Wi - Fi?

    any help appreciated!

    Problem solved (thank God):

    1. update the driver on the LOCAL network card (mine is INTEL 5100 AGN)

    2. restart

    3. set the WLAN to "Uprooting" autoconfiguration service (in Services)

    4 restart the gain!

  • This device (graphics card), cannot find enough free resources that it can use. (Code 12) __NetBook ASPIRE ONE - display adapter resource conflict?

    This device (graphics card), cannot find enough free resources that it can use. (Code 12)
    NetBook ASPIRE ONE - display adapter resource conflict? Can't find the other conflicting H-washer? Graphics Intel Graphic Media Accelerator 3150.
    If you want to use this device (graphics card), you will need to disable one of the other devices on this system. I bought this camera 6 weeks, I can't get the maximum. Set-up for my graphics cards. 800 x 600-32 bit only. Please tell me what to do. And ASPIRE or Windows7 customer service phone #. Thank you.

    Hi athe43,

    Below I've listed the details of error Code 12 and the article with additional information:

    Code 12

    This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

    Cause

    This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

    Recommended resolution

    You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

    Turn off the device in conflict

    1. In the device properties dialog box, click the general tab.
    2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.
    3. Follow the resolution steps provided by the wizard to resolve the problem.

    http://support.Microsoft.com/kb/310123

    This article was originally for XP however the description still applies.  Also, please see the following article on the opening of the troubleshooter of hardware for Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Hope that helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Satellite M55-S139 - no visible wireless network card

    Hello

    Already my Atheros said "great connection" and in fact some programs could run on the wireless internet but no web browser wouldn't work.

    Today, I bought a new router Belkin N +, and it's the same problem.

    I downloaded the drivers here

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1132275& rpn = PSM53U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663

    First of all, I put it XP and Wi - Fi and got the top pilot, which did nothing.

    I then really messed up and apparently forgot to put it in this way, all OS and all categories left and ran

    ACPI Flash BIOS version 1.90 for Satellite M55 (PSM53U) (v1.90; 2007-01-27; 3 M)

    and now it's worse than ever. It's like I don't even have a wireless card. No way to attempt to display wireless networks. Atheros options are all gray, there is no system for a wireless connection bar...

    I'm at my wit's end.

    All the tips are sincerely and greatly appreciated.

    You are right. Network adapter is correctly installed, but as I can see, WLAN driver is missing.
    Then please visit the U.S. Toshiba download page, and download driver WLAN for your laptop model.

    I do not know what operating system are you using and I can't say with certainty which driver is the right one.

  • Turn on Intell Pro Wireless 2200 card we on a Satellite A30-514

    I recently sent my laptop away for repair and they put a card Intell Pro Wireless 2200 in my laptop but I don't know how to turn it on.

    I flicked the switch on the side, but no light appearing and FN + F8 it does not turn on either.
    He made his appearance in my network connections all the time but when I go looking for networks it says: "Please power on the map use the hardware switch wireless.

    Help, please

    Simon Wakeford

    Hello

    I have the same problem with my A200-14F. I install WinXP SP2 and I update my bios - my Fn keys work but I can't turn on my Intel Wireless WiFi Link 4965AGN (I have to use my hardware switch to enable it).

    Can anyone help

    Thank you

    Nenad Pesic

  • Satellite X 200-driver of wireless network card not moved

    From one day to the other, my network card simply stopped working. I pulled to the top of my 200-20 t X and Vista told me that he had found the Intel AGN4965 unit that had to be installed. I agreed to let Vista search for the best drivers, but after a few seconds I said that there is a problem, Vista cannot find the files needed and cancels the installation of the card. I then downloaded the latest driver for the AGN4965 of Toshibas site map, install this and restart the computer hoping that find the new driver Vista wil... But without success.

    I then remove the whole device in Device Manager and then install the new drivers, but always, Vista tells me that it can't ind files needed...
    Any suggestions on what to do before you do a reinstall full?

    Hello!

    Try to use the drivers from Intel. Maybe they work.
    You install the driver with the setup.exe program? Try to install the manual drivers with driver update.

    Also make sure you have all Service Packs and fixes for Windows installed.

    Last but not least check from Toshiba Web site for an update of the BIOS.

    Good bye

  • Satellite Pro A200-16YT - update wireless adapter card for 802.11n

    Satellite Pro A200-16YT (PSAE1E) with Windows XP Professional SP3 from the East.
    I tried to increase my existing 54 Mbps wireless network speed by replacing the Atheros AR5007-EG existing with 802.11n 802.11a/b/g more quick adapter.

    The Atheros driver is v9.2.0.439 (08/04/2011) it's later. I tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a substitute, but without success. As well as trying the standard Windows wireless configuration, I used the Atheros Client Utility (ACU) which confirms that the card and the driver are installed and activated, but the radio does not, so no there is no association/connection to the wireless network!

    Reinstall the original AR5007 works without any problem. If someone experienced similar problems or can offer a solution, it would be greatly appreciated. Thank you

    Hello

    Not sure about this Wlan card but I read in the forum that some people had similar problems, allowing the new card Wlan.

    Check this thread for example:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=253505

    It seems that the problem is related to the assignment of the WLan card pins.

  • Satellite A200 not regognise any wireless network

    Hello world

    I have a Toshiba Satellite A200 with Windows VIsta Home Premmium Wireless does not, there not regognise any wireless network.
    I opened the Configfree, activate the wireless and radar, it not fint anything.

    With a wiless scanaer program said that there is no w onboard card.

    What should I do?

    Thank you

    Why you use Configfree?
    Forget this tool and use either clean of Windows configuration options or the manufacturer of the WLan card too.

    First you should check if the WiFi network has been successfully activated.
    Then, check if the wireless network adapter using the same WLan 802. 11 A B or G standard as your router WLan at home.
    Also, check your encryption settings and the type of encryption.

    And read other threads here because in most cases the WLan problems can be solved the same way!

Maybe you are looking for

  • ATI Radeon Xpress X200M 64 MB - can I driver for my Satellite A series

    I have a new HDD in my computer, and now Device Manager cannot find the graphic card. It comes to the top under "Other devices" and then it happens like "Video controller (VGA Compatible)" The drivers for this device are not installed. (Code 28)To re

  • Error Code 800F0825

    The 'important' Vista update KB937287 failed to download on my computer.  It comes up with the error code 800F0825, but whenever I search for it on the internet there is no relevant articles.

  • 100.0 Mbps, but not the acquisition of intellectual property

    100.0 Mbps, but not the acquisition of intellectual property

  • AutoCad and using the LaserJet Pro CM1415fnw

    I use Asus with Windows 7, 64 - bit with HP LaserJet Pro CM1415fnw, connect via the net, usb and wireless. I use AutoCad, but when I try to print, the AutoCad stops. Can print I have all other programs, without problem. Have tried to install the new

  • The drive firmware

    Hello - I am upgrading of the firmware 6.0.7 to 7.0.5 PS6500. Is the firmware of the disc included in the equalogic firmware? Thank you Announcement