Satellite A100 - 495 (PSAA9) - CPU and GPU upgrade

Similar Questions

• The HP X 18 - 1180EW CPU and GPU upgrade.

  Hello

  I would like to ask if it is possible to replace my stock CPU (P8600) and GPU (GT9600M)?

  What CPU is I consider T9600 but have no information on the graphics card is allowed.

  Best regards

  Hello

  For the GPU, please check these comments:

  http://www.TomsHardware.com/Forum/340107-33-laptop-graphics-card-upgrade-give-good-news

  CPU: 1-1 on the following Page shows you a list of CPU suported

  http://h10032.www1.HP.com/CTG/manual/c01705400.PDF

  Kind regards.

• Mac Pro CPU and GPU upgrades

  Hello, I am looking to buy a Mac Pro 2008 and had a few questions. 1. I found I can pass of say a 2 X 2.80 GHz 2 x 3.0 GHz CPU, but I looked up a few processors (from my MacBook Air i5 2013) and one very well like i5 Core 6600 k in guides and found compared to my only MacBook, it is barely faster , but compared to the 6600 k, is pretty lame. So I would like to know if I can put a more modern, faster CPU in the Mac Pro. 2. I saw you pass GPU also through multiple models of Mac Pro, but a similar question, wondering if I can swap in a GPU more modern. I'd be by accepting a list of compatible CPU / GPU if it works.

  Thank you!

  -Micah

  See:

  http://www.xlr8yourmac.com/systems/2008_MacPro_Dual_X5482s.htm

  ORS.html http://www.everymac.com/Systems/Apple/Mac_pro/FAQ/Mac-Pro-How-to-upgrade-process

  http://forums.MacRumors.com/threads/early-2008-Mac-Pro-processor-upgrade.1586171 /.

  However, your options are limited since the latest processors will not functionally work in a 2008 although they will be inserted into the socket

  -For graphics, updated map see:

  https://discussions.Apple.com/docs/doc-6592

  I would not get a Mac pro prior to version 2009. They use the FB-DIMM memory that run hot and often fail. Get an MP 2009 or later

• Re: Satellite M30X - can the CPU and GPU be improved?

  The chip CPU & models M30X display may be set to level and what?
  Thanks, Pete

  Hi Pete!

  I n t have good news for you...
  The CPU can theoretically but improved but Toshiba doesn't support this. The point is that the BIOS maybe couldn't recognize the new processor.
  In addition the graphics chip can t be updated because it s soldered onto the motherboard.

  For more information, see this:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Good bye

• Satellite A100 - 771 PSAA9E: ID ERR NOTINSTALLTVALZ MESSAGE appears

  Hallo,

  I've updated my system from xp to vista. The type of my computer laptop Satellite A100 - 771-PSAA9E ist.
  and when I install the update program, which either download the form from the website, to get out this message

  'ID_ERR_NOTINSTALLTVALZ_MESSAGE '.

  I know donnot, where is the last problem. (I downloaded the program just for my laptop)

  Can someone help me?

  Thank you very much.

  Hello

  Advanced search is a very nice feature. You know. I have used and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

  You will find the same deal and the solution!

  Seems that the BIOS update is a key.
  Good day

• Need help with the installation of the drivers on the Satellite A100 - 215 PSAA9E

  Hey all

  I just reinstalled XP home on the satellite A100-215 (PSAA9E-02F00VPT) and I meet some real difficulties get the LAN, VGA and wireless drivers installed.
  Everything else works, but for some reason, these drivers are not what they are supposed to and I find myself in a bit of a tile?

  Someone at - he heard of these drivers being wrong before, if yes is there a solution out there?

  Really need help now as have been on it for a good few hours now and no not get anywhere fast?

  Thanks in advance

  Matt

  Can you give an exact describtion of the problem with drivers?
  So first of all, you can try to download the drivers again from the download page of Toshiba here:

  http://EU.computers.Toshiba-Europe.com

  And make sure that all windows updates are installed. SP2 is important to be installed for some devices.

• Downloads of drivers for Satellite A100 - 230 (PSAA9)

  Hello, I need all the drivers required for Satellite A100-230 (PSAA9) for Windows XP, I just installed a fresh copy of XP and I have Dona´t have the CD that came with the computer, as well as I need to download?

  Why you n t take a glance o page pilot European Toshiba!

  Did you check this page from pilot:

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Perhaps you didn't look in the right area?

• Satellite A100 - 712 (PSAA9E) - No. TPM or TPM has problem

  Hi all!

  Once again, the same problem with the update of the BIOS...

  Quotting there
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=121750#121750

  "I decided to update the BIOS on my Toshiba laptop Satellite A100 - 712 PSAA9E to the latest version available (6.00).

  The installation is completed normally (went through all the steps, wrote to all 21 blocks) without any error, but after the reboot, I noticed that it is now displayed at the Toshiba logo screen.

  The blue progress bar moves twice but got caught then about 1/3 of the way through.
  To see how bad the damage was, I Press esc at the beginning of the POST and saw that it gives me the right Version of the BIOS (6.00).

  He also told me that "no TPM or TPM has problem" and "2039 M RAM Passed system."
  It then displays the message "Press to enter SETUP" (which makes the message disappears, but otherwise doesn't do anything.

  If I press F2 during the Toshiba logo screen, it replaces the bottom with "Please wait" message and nothing happens"

  Sollution "go to ASP" in the footsteps of sollution.

  Is there someone who can explain how to use the crisis to Phoenix (PCD) disk?
  I did floppy of PCD, replaced BIOS. WPH with my version of BIOS.

  After pressing WIN + F and on floppy power begins to work and beeps is my note. After 1 minute - all freez... Same thing with bios.bak - old version of my BIOS made after the beginning of Winphlash.exe...

  Wayting for the answer!

  Hello

  I posted this already in another view about a similar BIOS problem.

  To me, it seems that something was wrong during the process of updating the BIOS, and if you're lucky, the flashing of the ROM BIOS might help you.

  As far as I know that you would need a BIOS version of special rescue and the drive to reflash the module ROM that you do not and therefore, you will need to contact the ASP in your country for assistance.

  This isn't a real solution that you expect, but it s an advice how to get a solution
  This is why I would recommend contacting the ASP in your country for the control of the laptop

  Good luck buddy

• Satellite A100-912 (PSAA9E) a device is missing after installing Vista

  Dear,

  I recently received a Satellite A100 - 912 (PSAA9E). Windows XP Home was preinstalled operating system. But when I installed Vista Ultimate, the Device Manager shows that a device is missing pilot. Its properties show that it is located on PCI, device 6 7 Bus and function 3.

  I downloaded the drivers all listed for the toshiba site system. So, can someone tell me what device it is and where I can find the driver for it? All devices such as the display, sound, modem, lan/wlan, player card, fingerprint reader, buttons of media multi burner Super multi and touch to touch work well.

  Hey Buddy,

  I Don t really know what device it is, but you can for example try a linux live cd. The live cd lists you start a list of pci devices so you can find that materials are in your machine.

  Alternatively, you can perform a search in google for 'list of pci Vista' and you might find some pci list of tools that can help you get information about unknown material thjat.

  Welcome them

• Satellite A100-495 - Intel 3945abg wireless network card cannot find wifi networks

  Greetings,

  I have some problems with networks wireless on my laptop Satellite A100-495.

  The problem is: my wireless adapter (intel / pro 3945abg) doesn't seem to find wireless networks. If I portable place very close to my router wireless (such as 1 m) - connection can be established. If I move away (~ 5 m)-no connection or 'very bad' quality and constantly broken. Other notebooks I've tried still have "very good" quality at the same range.

  This happens with other routers as well. And I can not any sign of wi - fi in my Uni (my colleagues have no problem with their machines).

  I tried to play up with some parameters. Reinstalled adapter. Downloaded the latest drivers. Nothing helps.

  A tip? Thank you in advance.

  Hello

  Something like that happened to me a long time ago.
  I used the Wlan configuration option to own Windows. For several months, I use the Intel Proset configuration utility to establish the WiFi connection!
  It works!

  In addition, I have disabled the power Wlan option in the Wlan card properties save and adjust the intensity of the signal at top. I remember, in the advanced properties, you can find the 802.11 option preamble. The value is Long and short on my laptop.

  Hey dude... Check it out.

• Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

  Hello

  I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
  I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

  Can someone help me?
  Where can I get the right drivers network controller vor and WLAN card?

  Hello

  As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
  Driver WLAN can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
  But note; You must choose the Archive in the type of product because it old series.
  There are two different LAN drivers;
  -LAN driver v 9.2.24 for Ethernet Pro1000
  -LAN driver v 8.0.43.0 for Ethernet Pro100

  In order to check both!

• Satellite A100-495: strange starting problems & freezes

  Hey guys.

  I recently got my Satellite A100-495 back from repair - it had a power problem (no led was flashing and it does not start of course). They told me that the motherboard has been renewed.

  Now, I have the following two issues:

  (1) it freezes suddenly sometimes in windows after 1-2 hours of operation without problems and I have to hold the power button for a few seconds restart

  (2) I press the power on button, LEDS are underway but the screen remains black, sometimes becomes gray, hard drive makes noise, fans going on but it just does not start, do not show anything. After some tests, I have to start but once again crashes after a couple hours of functioning properly.

  Can someone tell me what is the problem here?

  Bad memory (RAM) can cause this.

  If you can get it to start, test the memory with Memtest on a bootable CD. www.memtest.org

  Otherwise, try the combination of the different memory card. If you have 2 sticks of memory, try with one stick, then try the other stick, try different locations.
  Often the memory pins can oxidize and cause problems. To clean the pins, use a pencil eraser/rubber and rub the pins of module memory.
  Be careful when you handle the memory, you can zap easily memory with static electricity. To make sure that you are connected to the earth when the memory handling.

• Satellite A100-590 PSAA9E freezes on the Toshiba start screen after BIOS update

  Hello.

  Yesterday, I made an update of the BIOS on my Satellite A100-590 PSAA9E 03Z00QGR with the appropriate flash:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 17 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = all & selectedLanguag e = 17 & type = all & page = 1 & ID = 58477 & DISO =-1 & driverLanguage = 42

  BIOS - 20070709111839.zip

  After flashing, the machine restarted automatically, but unfortunately it keeps now suspended from Thoshiba welcome screen. Also by pressing F2 or F12 will not change anything. It seems that the BIOS is damaged.

  I saw that in the BIOS package are delivered the two files (s10gm590.rom and s10pm590.rom) flash. But just the execution of the BIOS590MP.exe SanAntonion10 a .vbs script starts decides which automatically selects and loads a flash file. Maybe she chose the wrong?

  What should I do now? Is there a way to restore the BIOS, or do I have to send my laptop?

  Thanks in advance

  CARPET

  Hello

  sounds are really serious. Unfortunately, I can just give you the only clue you will get with each user here in the forum:

  Find the nearest authorized service partner (you can find one by using this link: http://209.167.114.38/support/Download/ln_byModel.asp)
  and bring your machine. In addition, you must explain the guys what happened so they can do something for you.

  Good luck buddy

• Satellite A100 - 153 (PSAA9E) - how to update display drivers?

  Hello!
  I need a current display for my ATI Radeon Mobility X 1600 driver in my laptop Toshiba Satellite A100-153 PSAA9E.

  I can not install the Catalyst Control Center (and therefore the latest driver). It says to me "this driver is not compatible with your system. Contact the manufacturer.
  In the magnificent... download section are the only drivers of 2006 for my X 1600. Anyone know how I can install current drivers? Is it possible to avoid the 'blocking of Toshiba' for display drivers?

  Thanks in advance

  Hey Buddy!

  The display on the original ATI site driver is not designed for graphics cards for laptop and so that you can install t. In addition he doesn t have an overheating protection and therefore can damage your graphics card! It s on your own risk!
  If you want the ATI driver, you must use Mobility Modder. Then you can install it, but don t forget s about your risks and perils and you will lose the warranty.

  The drivers from the Web from Toshiba site definitely work for your laptop then why you want to install a different driver?

  Good luck!

• Satellite A100 - 192 PSAA9: display black stills from time to time

  Hello

  Satellite A100 - 192 PSAA9 with card ATI X 1600.

  Despite the fact that I have installed the latest driver on Toshiba support site, screen darkens (off) from time to time for no apparent reason.

  I turn off the computer by pressing the button for a few seconds.

  When I turn on the computer, the screen is still dark, even if the computer starts.

  Only after I take the battery from the computer and on new and then turn on the computer, the screen is OK.

  I could not know if it's a hardware or software problem.

  Computer is one and a half years.

  I wanted to know if anyone has had such an experience before taking the computer to the service center.

  Do you use the Toshiba original pre-installed factory image?