Satellite A100-998: I want to use the Wlan - what do I need?

Similar Questions

• Satellite P10-133: I want to use the WLAN

  Hello

  What should I do when I want to use the WLAN with the satellite P10 133?

  Thanx

  Hello

  First that you check if your laptop has been equipped by the wireless network adapter.
  If this isn't the case, then you need to update.
  The easiest way would be a use of the WLan USB key.

  Check your WLan router level. There are different WiFi standards such as 802.11 A, B, G and N
  If your WLan router supports 802.11 B and G, then you should buy and stick that would support both standards too!

  Then configure the WiFi network (especially it s described in the installation instructions provided with WLan stick) and the WLan router.

• Satellite A100-906: Express player media use the reinstallation of the operating system

  Hello

  I use a Toshiba Satellite A100-906. I did NOT know about what express Media Player recovery cd's and I've never used it. But now I want to know what's the point of use.

  In any case I had to format my laptop and I have used the recovery cd. So now I've read that if I want to run the express media player I must first of all, insert the express media player cd stop button of my laptop and then use cd/dvd to start it.

  The problem is that I find in win xp with a Windows Media Player. Something go wrong with the format (using the recovery cd)? I had to first install the express media player? and then format and reinstall xp?

  If that's the problem, I, at this stage, to be able to install express media player without losing my data? I expect an answer. I hope you'll forgive my ignorance :).

  Best regards
  Harris

  P.S. when I boot from the media player recovery cd express I get three options 1) crash installation 2) uninstall 3) delete all partitions. So did I express media player installed?

  Hello

  So you're a bit confused. Am I wrong?
  If you want to start the Express media player you n t need to insert the CD of express media player!
  Express media player must be installed on the HARD drive!

  You have recovered the laptop with your recovery CD Toshiba but didn't install the Express media player since the EMP CD!
  This is false.

  Usually the Media Express Recovery CD drive must be run before performing the recovery from the recovery DVD-ROM products.
  Cannot install the Express media player after using the Toshiba Recovery CD!

  So first to run the CD of Express media player and then run the restore CD!

  If you wish, you can consult this useful document of Toshiba providing education
  How to find a laptop Expert Mode with 2 Partitions and Express Media Player?
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  hope I could help a little

• Satellite A100-549: BSOD after I used the recovery from another PC

  Hello.

  Had a few probs with my laptop and decided to recover it using another pc recovery disc.
  I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

  The opertaing system is Windows xp. The disks I got with a Vista.
  It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

  I think I may need to get your hands on a good drive and load it on again.
  Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

  Colin

  Hello

  Don t user recovery drive to another PC, because it won't work.
  You can use a clean Windows OS disk or the Toshiba recovery disc.

  Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
  If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
  This can cause the BSOD!

  So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
  Toshiba drivers can be downloaded from the Toshiba page!

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Satellite A200-PSAE6E: I want to use Windows 7 - what drivers should I use?

  I have a Toshiba Satellite A200 PSAE6E, and now I want to use Windows 7.
  Only, I have a question, if the drivers are supported and what BIOS I need to use

  Hello

  Windows 7 is not official on the market. Only the RC (Beta) version is available.
  This means that there is no driver specific to the Win 7 OS.

  But as you know the Vista is very similar to Win 7 and it is why some drivers (not all) should work and work with Win 7.

  Just test and check what can be used and what doesn t work with Win 7

  Maybe you could post some summary finall...

• Satellite A100 - 811 PSAA8E - can I use the function keys to control winamp?

  A similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26351

  My question is: can I use this buttons included the following buttons, back, stop, and pause to control winamp?
  My model is 811 A100 PSAA8E

  Thanks for any help!

  Try to activate the "Global Keys" in the preferences of-> Winamp Plugins section.

  By default, the keys are on:

  Rewind/FastForward = CTRL + LEFT and ARROW CTRL + RIGHT
  Previous track / next track = CTRL + HIGH and CTRL ARROWS

• Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  you need a serial number and the installation file.

  the former, http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  the latest,

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Satellite A100-998: Vista upgrade disc may be used without the Toshiba disk?

  Hi all

  After 8 weeks waiting I finally got my vista upgrade a couple of weeks, but when I put in a disk by toshiba, he said to use first of all, I found that the drive is faulty. I contacted moduslink but received no help from them. I want to know is can I upgrade to vista without using the toshiba disk?

  I have a laptop Toshiba Satellite A100-998 with Windows XP Professional with the Media Center. the upgrade is for vista professional. Any advice on this issue would be welcome!

  Thank you
  Dave

  Hello

  I m a bit confused that CD or DVD is defective?
  The received Vista DVD or the Toshiba Recovery CD?
  To my knowledge the received CD of Vista upgrades the old Toshiba XP to Vista so I think you have to pass the original picture Toshiba XP for Vista

• Can not resize the partition on the Satellite A100-998

  Hello
  I am owner of toshiba satellite A100-998 with 200 GB hard drive. By default there is only 1 partition on the HARD drive when I try to resize this partition and create another 8 partition magic shows me error that it cannot write to the boot sector and it fails. I didn't install any software on this computer and it has the latest version of the bios.

  Ranish partition Manager displays the same error.
  I don't know what the problem is because I've done similar operations on multiple computers with all the problems.

  Thanks in advance for any suggestions

  Hello

  I also use the magic of 8 Partitions for creating and management of simple partitions on the HARD disk.
  But I wonder about the size of your HARD drive. As I know the Partitions Magic 8 does not support 200 GB HARD drive. I didn t to test but the partitions on the manufacturing site manual says it does not support.

  However, sometimes, I had similar problems with my 80 GB HARD drive. The simple solution was to defragment single partitions.

  I put t know if it will help you because of you HARD drive size, but you can try it.

• Satellite Pro A100 SCOCAPS: I want to change the command for real player buttons

  I have A 100 SCOCAPS, I want to change the media controls to real player instead of windows media player, but in media control list only windows MediaPlayer is appearing... all about can help me please?

  Hello

  I'm not 100% sure but I think that all media buttons are designed to support Microsoft WMP only. Maybe if you use real player plugins so that they work.

  I found some similar topic, but the guy wanted to use the buttons for WinAmp. If you have time please check under http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=3&threadID=14884

  If you are success please give some feedback. It can be useful information.

  Bye and good luck!

• Satellite A100-998: Touchpad acts crazy

  Hello

  I am now the proud owner of a Satellite A100-998, with Intel Dual-Core, 2 GB of RAM, pregnant harman/kardon and so on.
  Is a beautiful piece. However, would be much nicer if I had no problem from touchpad:

  Do you want to use the scroll bar on the right, in any application (Word, Excel, Mozilla, no matter), or you want to close the window by clicking the X. But then your system seems to "think" that you are working on the underlying window and it takes your window away and simply shows the underlying window. As if she had the wrong coordinates pointer/Mouse/touchpad! I tried everything with the two parameters dozend touchpad software allows, but does not. No matter what the setting.

  The distributor said that I would ask Toshiba, that he has never heard such odd performances.
  A Toshiba engineer looking in this forum and answer these questions?
  Or does anyone know what to do about it?

  David

  Sorry, but I think I have to disappoint you. To my knowledge there is no Toshiba technicians or engineers. This is a user forum.

  However, I would like to help you, but I've also never heard these dysfunctions of touchpad.
  This problem also happens when you use an external USB mouse?

  I don't know who exactly touchpad software you use, but on my laptop I can configure the easy touchpad properties.
  Please check if you did not select the tap again and hold to drag the option. Maybe it has a bad influence on the device.

  In addition, you can configure different tab area. Each tab on the touchpad can perform different actions. So check it!

  Also check the movement of the pointer and other like edge options request. There must be parameters that cause strange movements

• Satellite A100-998 - Dual View possible?

  Anyone ever have Geforce Go 7300 working in dual view with external monitor?

  The thing is that I need my external monitor as a main display and the laptop up as a secondary. Is this possible?

  I was able to set the display mode double with my laptop as main display screen, but this isn't what I want. I'd appreciate any help, because I struggled to solve try for centuries...
  My laptop is Toshiba Satellite A100-998.

  Hello!

  Of course, it of possible to adjust the secondary display as primary monitor.

  Go into the display properties > settings, then choose the second monitor. There is an option to use this device as the primary monitor and score it.

  Good bye

• Satellite A100-998 - support 2 GB RAM modules?

  Hello

  I'm looking to upgrade the memory of my laptop. The vehicle currently have 2x1GB modules in the expansion slots. The manual says it takes PC4200 200 pin memory, but does not specify if it will accept 2 GB sticks as this http://www.ebuyer.com/product/164911. It does not mention of the sticks of 256 MB, 512 MB and 1 GB.

  However, I see no reason why he would not support the higher capacity, if I wanted to move to 4-GB memory total. Can someone confirm that this will work? Thank you!

  Andrew

  Hi André,.

  According to the specs on the page of Toshiba, Satellite A100-998 supports 2-GB memory modules. This means that you can install the 2 GB of memory in each memory slot for a maximum capacity of 4 GB.

  For example, I recommend high-quality Kingston modules. I always buy Kingston modules for upgrade and never had any problems.

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app