Satellite A100: Can WXP during the installation of Vista - I use Vista drivers

Similar Questions

• Satellite P100-324: problems with the installation of Vista-> cursor flashing

  All greetings. Tried to put one of these days of Windows Vista. But my attempts to failure are completed. After the first? There is a black screen and blinking cursor. So any activity HDD and DVD, it is not respected. Recently updated BIOS updated to v3.30. Help put already and I do not know what to invent.

  For English I apologize, I'm of the Russia :)

  Hello

  Have you tried to format the HARD drive and reinstall Vista?
  Try to access the BIOS and check if the HARD drive is recognized in law.

  What exactly happened during the installation of Vista?

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite A100-233 - freezes during the update of the BIOS

  I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
  Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

  OS: Windows XP Pro SP3

  And when I tried the BIOS update and load the new BIOS: ok
  Analyze the compatibility of old and new BIOS: ok
  Read old BIOSES: ok
  Save the old BIOS to the backup file: ok
  New Flash start cant BIOS and 1-2 min after the gel cell

  I solved.

  but really not funny...

  If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

  Post edited by: jadefox

  Hello

  I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

  On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  Welcome them

• Satellite M645-S4055: Disconnections during the installation of Windows XP

  Hello everyone

  I want to install Windows XP Professional on my laptop Satellite M645 S4055 but fail to do so. During the initial installation, it gives blue screen.

  Currently, Windows 7 Professional installed.

  I've upgraded BIOS 1.90 version also available on the toshiba Web site.

  Please give me a solution.

  Hello

  I imagine that you didn t include the driver to CD Win XP SATA.
  The point is that Win XP needs an extra SATA driver in order to be able to recognize the HARD drive that is connected to the SATA controller.

  Here's a nice Support Toshiba Europe basic knowledge FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  You should check your chipset and download the Intel Storage Manager driver on Intel page that would support your chipset.

• Satellite A100-773: problem with the installation of WinXP Pro

  Hello

  I try to install Windows XP Prof on my new laptop A100-773 (Media WinXP Center preinstalled Edition). After that I put in the installation disk, restart the computer and then selected CD in the boot menu, it said something like "verification of hardware configuration". After that black screen and nothing more happens.

  Also, I tried to start Linux (Knoppix) CD. Same problem, at some stage, the system stops and doesn't do anything.

  Anyone has any idea how this problem could be solved?

  Thanks a lot for your answers in advance.

  Kind regards

  Chris

  Hello

  Have you tried to boot form CD recovery Toshiba or on the original CD of Microsoft?
  The recovery installation CD should generally work without any problem.
  In addition, if you want to retrieve the unit with the Toshiba Recovery CD you will get 2 modes. Standard and expert mode.

  I guess the message because there might be something wrong with the hardware or any device. I would recommend to enter the BIOS and check the settings. You can also try the options default and safe change.

  But first try to boot from the recovery CD.

• Satellite L40 - error message during the installation of value-added package

  Hello

  yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

  I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
  I ran as administrator and also tried compatibility mode.

  Help please, thx!
  Constantin

  Hello

  Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
  My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

• Qosmio G30-153: no drivers were found during the installation of Vista

  Hi I tried to install Vista on my computer, but there are some bad things. I just insert the Vista CD and restart my machine.

  Vista has started to install and I have reached the point where Vista should find the drivers to choose, but its tells me no drivers were found.

  I took it to the Agency in Syria and they told me that this (Qosmio G30-153) machine comes with vista only.
  If you have upgraded from XP applies to the Qosmio only.

  I think there is another problem, but they could not solve it because I told them when I go to the configuration of the system, I found the drivers, but the names are different.
  Driver (C) named Raid 0, but the names of the drivers D Jbod and I think they should be eponymous.

  If they are different name, but they don know what I mean.
  do you know how to change the name of the pilots and why they are different.

  I hope you can help me and I will answer you on my email address if you don't mind my ([email protected]) is

  Thanks alotttttttt Byeeeeeeeeeeeeeeeee

  Here is no problem at all. Visit the Toshiba support under http://eu.computers.toshiba-europe.com page

  You will find RAID driver. Please download this driver and use it for the installation of the OS. Unmanned RAID HDD is not visible, but after the hard disks in RAID driver loading will be visible and you can continue the installation of the OS. RAID driver can be saved to USB.

  If you have any other questions, please write again.

  Bye and good luck!

• Satellite M70-164 PSM71: after the installation of Vista the display flashes

  Hello

  I have a M70 - 164 witch has an ATI mobility Radeon x 700 with 128 MB dedicated. I installed Windows Vista Business on it, but sometimes, when the LCD resolution changes (IE, when I start a game, when I close the LCD screen and open when I connect,...) the screen becomes stupid...

  You know, with lots of color, but I don't understand anything in it! As you was whatching a coded TV channel, flicking and with no image defined.

  Anyone know what it can be? It started to happen when I installed windows Vista. I already did twice, but the problem is still present. I've used Vista drivers, the drivers from the ATI site, toshiba.ca drivers, drivers of other toshiba computers...

  I don't know what to do more. If you can help, I would like to say thank you.

  João

  Hello

  For me, it looks like a graphics driver issue.
  Your M70 seems to be a European model and this is why you must use the graphics drivers that are specifically designed for this model of laptop but unfortunately I checked on the European pilot site and found nothing :(
  I noticed that Toshiba releases every week new drivers for various notebook series.
  Maybe you unit series will appear both in the text

  But nevertheless, this problem is very strange, a friend of mine installed Vista on the M70 and something like this didn't happen.
  Maybe it of not a driver problem; (but related material?  :|

  Hmmm updated you the BIOS?

• During the installation of Vista SP2 (KB948465) on a laptop, I get error code 800F082C.

  There is very little information on the Internet for this error code. The OS is Vista Ultimate on a Dell Precision laptop. The machine is a member of a domain AD running on SBS2008.

  Hi Homechicken,

  Welcome to Microsoft Vista answers Forum!

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the System Update Readiness Tool for Windows

  Vista and Windows Server 2008: http://support.microsoft.com/default.aspx/kb/947821

  No matter what field of issues; I suggest you contact the TechNet forum for further assistance. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I download the software Toshiba Vista - drivers, tools?

  I upgraded my Xp which is capable for Vista EDITION home Vista premium, but I lost all the software from Toshiba.
  Where can I get them!

  Help please!

  Drivers, tools and utilities that you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. Select your laptop model and the operating system support.

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• Satellite L355D-S7825 - hangs during the installation of recovery

  My laptop girls. She asked me to restore the computer to factory settings. It is running Vista Home Premium 32 bit. I tried the restore disks 4 times now to pretty much the same results. It will get all the way to the "application final Configuration where it installs the user manual and the office links and then it's there. After reading several posts here with the same problem, I decided to let it sit all night. This morning it had expired. I clicked on the button of the mouse to wake him up. It passes to the logon screen. It shows login Admin and says that the account has been locked, please contact your system administrator. How can this be? It won't let me! My only choice is to restart the system. After the reboot, it displays the screen of the AFC and reinstalls the two same files manual user and links and then it's there.

  I can minimize the screen of the AFC I did and then I changed the power settings to never expire. I have the WiFi off button as requested by AFC screen, as it will not be installed file links with WiFi turned on and the user manual. I don't know what else to do.

  Anyone has any ideas on this? What would you say if I was totally format the HD and then try to restore? Any help would be appreciated.

  Hi Poppi,

  What you mean with screen AFC?

  Well, if recovery installation doesn't work properly, it s hardware malfunction or the disk recovery...

  You can install Windows from a normal Microsoft drive correctly?

• Satellite A80 - 49 error during the installation of recovery code

  Hello

  I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disc and error #49 with writing problem appeared.

  I wonder what wrong with my laptop. What is a hard drive problem?
  Can someone help me?

  Thank you.

  Hi ClementLo,

  > error #49 with writing problem appeared.
  I put t know when you get exactly this message but theoretically, it might be a problem with the HARD drive. Perhaps he has bad sectors and must be replaced

  Can you also test the same using a disc of Microsoft? Maybe the disc is scratched