Satellite A105-S4274: after XP to upgrade Vista ACPI \TOS1900 device is not installed?

Similar Questions

• Satellite A105-S4274: need driver ethernet XP & screen is sometimes black

  I recently reformatted a Satellite A105-S4274.

  He has Xp SP3 I can't find the correct Ethernet driver.
  I installed all those on site pilot Toshibas to this model and stands still as no driver in the Device Manager.

  I also noticed that sometimes the computer goes black screen on me.
  Do not fall asleep, but go just black. Any ideas on what causes this?

  Maybe the driver problem?

  Hello

  Driver Ethernet means both: LAN or WLan.
  What device is already listed in device-> network cards Manager?

  If the LAN card is already listed then you need WLan card driver.
  If the wireless network card is listed then you need to install the LAN driver.

  With regard to the black screen.
  This happens if you touch the laptop for some time t n?
  S notebook my screen password if I put t touch for a while.
  I put the settings in Toshiba Power Saver-> screen and the screen turns OFF after 10 min.

• Vista service pack 3 is not installed

  Vista service pack 3 is not installed

  There is no Vista Service Pack 3.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Re: Satellite A105 stops after 60 seconds (NOT a heat problem)

  Satellite A105-s4344 stops after EXACTLY 60 seconds. The mobo was removed from bevels and all devices removed unnecessary (DVD, HDD, WiFI etc.). Swapped CPU and RAM with those well known. AC adapter / CC exchanged and battery by the well known. Does the same on the AC or DC inputs only.

  I have not yet flashed the BIOS (at 60 seconds, that would be silly). But, I'm looking to replace or flashing with an EEPROM burner. Currently has V 2.0

  I don't know what heat genration detection using this system, but it is a possible cause if it is one of the later generations (visit http://www.topbits.com/how-to-monitor-cpu-temperature.html if you don't know that I'm referring to).

  Before reballing North and South of the bridge and flashing, I thought that I would get feedback from you folks. Just to cover all bases ;)

  P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.

  > P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.
  :) :) :) Best thing I've seen in this forum.

  Back to your problem.
  I'm not a technician but this is just my opinion on all of this. The fact is that after your laptop on CPU switch in seconds only reaches very high temperatures. You can turn on your laptop and just enter the BIOS settings and the same should happen again.

  I can't say for sure if it's 100% thermal or not question but what else can be responsible for decommissioning? CPU will be warm in just a few seconds. Significant change structure with temperature change and I can only imagine a contact will be interrupted.

  On this forum, we have had many reports similar as when portable cold starts and works well, but after that little time is off without reason. Maybe I'm wrong, but to me it sounds like heat or deliver bad contacts. Let's see what other people have to say about it.

• Satellite A105 freezes after loaded Windows xp

  I have a Satellite A105 - S4074.
  The operating system loads then freezes.

  I tried safe mode and ran the error checking and defragmentation. I tried the config sys and when the system is loaded, then freezes.
  I have the week last to system load and have an internet connection. But it froze again the next day.

  I can't get a consistent performance. I have windows xp media center. I've recently upgraded ram to 4 GB.
  What are my options? I lost the original restore disks.

  I'm ready to reformat the hard drive if necessary.

  > I recently upgraded ram to 4 GB.
  Have you checked if the laptop would freeze using the old RAM modules?
  If this isn't the case, then you should check this!

  In many cases of bad, no compatible or defective modules could cause these issues

• Error message after attempting to upgrade Vista to Windows 7

  Have an older Gateway laptop. Decided to try to upgrade to Windows 7. Can not get anywhere now, goes to blue screen and keep this message:

  SMART failure provided on hard disk 2: WCD WD 3200BEVT-22ZCT0-(S1)

  Contact hardware manufacturer

  File: \Boot\BCD

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred

  94.29.00 BIOS version

  Thanks for your suggestions,

  Anna

  Hello

  Your hard drive is about to fail according to the mini-message.

  Read this information about it:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/smart-failure-predicted-on-hard-disk-2-WDC-WD/2921839c-9C9D-4d4b-9752-8287605df956

  ______________________________________

  And also before you try to upgrade an older machine to Windows 7 follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Vista Service Pack 1 is NOT installed

  So, I wanted to upgrade to Windows 7. Unfortunately my installer for 7 told me that I had to first install Service Pack 1. Large. I know I don't have because it does not appear on my list of Windows Edition. I try to get it from Windows Update, but when I search for updates, it shoots only other stuff (e.g. Office Genuine Advantage Notification KB949810), but the service pack does. I checked my update history and apparently this Service Pack 1 could not install and I received the error code 80080008.

  So I download the thing directly from http://go.microsoft.com/fwlink/?LinkID=139503, and when it finished downloading it disappears. Then I saved it on my desktop and when I click on it nothing happens. Can someone help me?

  Slurgly wrote: This would have to do with a question I had on several occasions with the installation of .NET framework 1.1 Service pack and the .NET framework through update 3.5 service pack?

  Yes, it's a possibility. These updates of .NET Framework are among a myriad of SP1 updates, like, for example, KB955430 & KB947821.

  But I'm more concerned about one or two other things:

  1. the error 80080008 is very rarely seen and suggests that an infection in progress hijackware is at the origin of the problem.

  2 Vista SP1 is available through Windows Update (for most users) since March 18, 2008 (SP2 since March 2009). It is very unusual that SP1 has not yet install on your computer again.

  How long Avast4 has been installed? What antivirus application was installed before you installed Avast and your subscription always news when you have uninstalled it in preparation for the installation of Avast?

  A Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing, your best bet at this point may be to back up your personal data, format the HARD drive and do a clean install of Vista to get it then patched up to SP1 before you perform the upgrade to Win7.

  I doubted much that a repair installation (upgrade AKA on-site) would solve the problem. Speaking of which, have you ever done a repair for some reason installation any?

  PS: Free support for installation of SP1 problems has been available since March 18, 2008 through June 30, 2009. This support would cost you $59 USD per incident (or more) now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista - Error Code: 0X80070B7 (could not install Service Pack 2)

  Cannot install SP2. 0x80070b7 error code. Also can't install the system tool, but no error code.

  Automatic update of Windows attempted to load 4 updates recently, but an error message came up saying that it could not install SP2. The code was 0x80070b7. I tried to install SP1, in the case who had not worked for a long time, but the message is that the 'SP1 Setup is already running. I tried to install the tool of analysis, but all I get is a message saying KB947821 could not be installed. My computer still works until all this happened, and now it crashes after a few minutes of walking. It will be release after 20-30 minutes for a minute or two and then lock up again. Obviously, something happened in automatic installation and now the laptop is somewhere between facilities. I'm away for two weeks and are in desperate need of my computer. What can I do?

  Thank you

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C50-C023 - Win 8.1 PCI Device driver not installed

  Hi This is my 1st post here

  My friend bought the satellite above with 10 Windows pre installed on it. accounting software, it should run on it is not compatible with win 10.

  He asked me to help downgrade to win 8.1. I called and they said yes everything will work, but Toshiba is no guarantee nor provide a decommissioning. That is to say, do so at your own risk.

  So he decided to go forward and we bought 8.1 and I installed it. now, everything is ok except for 1 PCI device display as not installed in Device Manager. Any help in this matter would be greatly appreciated. It's one thing to chipset?

  Kind regards

  John

  Hello

  Recently, I helped a friend the low-grade sound C50-C023 to win 10 to 8.1 Win.

  Everything went well except that now, I in Device Manager my PCI device not installed and no updates can be found anywhere. I have just completed do all Win 8.1 updates but still have this problem

  Any help would be greatly appreciated.

  Kind regards
  John

• updates for microsoft vista KB2431831 and KB971029 will not install I get an error code 646

  The Microsoft Vista download KB2431831 and KB971029 will not install, I tried manually install all I get is error code 646

  the KB includes an automated fix this that solves the problem, look here: http://support.microsoft.com/kb/2258121>

  Let me know if this helped.

• Vista Service Pack 2 will not install on my Vista.

  Since the Service Pack was released I tried to install it. And each time, repeatedly, he'll prepare my computer, tell me to restart, it will do the "install Windows Vista Service Pack 2 1/3 0% Complete" thing when I restart and right at the end where it says "3/3 100% complete" it will stop for about a minute, then say "Service Pack was not installed. Returning change"and it'll take about half an hour at a time to undo everything he does simply, without any reason. I don't know what is happening, and it's the most frustrating thing because it won't go away, and I do not understand how to fix it. Could someone help me with what to do please?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************