Satellite A110-260 does not work after upgrading RAM

Similar Questions

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L850 - Bluetooth does not work after upgrade to Windows 10

  After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

  It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

  The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
  All this worked fine with W7

  My laptop is Satellite L850 (PSKDLE)
  Any ideas?

  Hello

  In most cases, BT does not work due to lack of BT software.
  I guess you will need to install the filter for the BT driver package.

  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

• Satellite A210 - BIOS does not work after upgrade

  Hello

  I have a satellite A210-17 for a few years now, but I made the mistake to go to the Microsoft Web site
  to make a BIOS setting to day and once I installed upgrading BIOS, that the laptop did not return ever on, black screen.

  I brought a guy in the month city 3 or 4 he is, he said, it could replace a bios chip if necessary
  but did nothing or I would have heard of him now.

  Is it possible that I can get the bios chip and have him install for me?
  I don't have 200 euros to replace the whole motherboard.

  This laptop was brilliant before that.

  Thanks in advance

  Update the BIOS is a very serious procedure, and the use of fake and not compatible BIOS would damage the motherboard.

  To be honest, I don t think that the replacement of the EPROM would help you that of course, the BIOS is stored on EPROM module but in most cases this chip is soldered to the motherboard and the EPROM replacement will not be easy

  To my knowledge the EPROM module could be flashed once more using the crisis disk BIOS and the special procedure. Usually, these updates of the crisis of the BIOS can be done by maintainer authorized Toshiba and that don t require the replacement of the EPROM module.

  I also read in this forum that some guy tried to Flash the EPROM module to clean hands in some cases, it worked, but in different cases such update does not work correctly

  However, I recommend you to use the advanced search option forum and check a few different discussions on crisis disk BIOS / update

  Otherwise I recommend you contact the Toshiba ASP in your country and products BIOS Update of the crisis

• Satellite L750 - WLAN does not work after upgrade to Windows 10

  After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

  Dear Jolgas,

  It seems that the problem of driver. You should installed driver WiFi for window 10.

  Thank you
  Solène

• Satellite M30-604 does not start after upgrading RAM

  I have exactly the same problem with a Satellite M30 604! I have 2x1GB sticks and screen stays black. It works if I use one of the 1 GB sticks and one the old 256 KB stick but not the 2x1GB sticks as it should be (according to the specifications of my model manual).

  Boths glue work perfectly, I tried to the sepparately.

  In addition, computer does not work with the single 1x1Gb stick, mandatory I have to combine a new (1 GB) with an old (256Kb), or just stay on the two old sticks...

  What can I do? PLEASE, I BEG YOU!

  Hello

  Satellite M30 can be upgraded up to 2 GB of RAM, but you must use compatible RAM modules.
  As far as I know, you can use the modules of PC2700 and PC - 2100 DDR SODIMM 200 pin.

  I think that you problem is certainly linked to a not entirely compatible RAM modules

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• Tecra 8100 does not work after upgrading RAM

  Hello
  I bought a kingston KTT-SO815/256 pc100 144 pin, did a 2.50.on of my Tecra 8100 BIOS update
  It still does not.
  In my BIOS total ram is ok, so the computer knows that it is in the slot B, but when I try to boot the computer to a blue screen appears necessary a bios update. (Already done) APCI is not good.
  Someone has an idea?
  Now there is in the slot A - 64 MB
  Tried to put 256 MB in the B slot
  them, that nothing worked changed

  Hello

  Well, the blue screen error message usually appears because of the failure of the software matter or material. In case you I guess, apparently because of the new RAM.

  The fact is that you can upgrade the memory to the maximum. 512 MB.
  These modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  I recommend that you check you modules and try to use another compatible.

• Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

  I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

  When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

  I couldn't find any rider or the settings of the bios for the RAM...

  Any idea?

  Thanks in advance for the help

  The last plausible explanation is that both modules are ok, but not compatible with each other.
  The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

  So I think that you need to replace the modules Kingston modules are great and work without problem.

• Why Windows Aero does not work after upgrade RAM?

  After that I recently updated my computer desk with 2 new modules 1 GB DDR PC3200 400 mhz 184pin RAM

  PROBLEMS:
  * Windows Aero stopped working.
  * Windows recognizes only 3.5 GB of RAM on 4.
  * Windows Experience Index will not refresh the WEI Score.
  Any help with this?
  I'm back to the old RAM modules and all is well, but whenever I update the last two RAM modules, these errors occur.
  
  MY RIG:
  OS: Windows 7 Ultimate.
  SR1830NX Compaq
  Max supported RAM: 4 GB PC3200 400 Mhz 184pin DDR (4 Slots of 1 GB each)
  Configuration of the RAM before upgrading (physical)
  SLOT 1: 1 GB
  SLOT 2: 1 GB
  SLOT 3: 512 MB
  SLOT 4: 512 MB
  (although she had 3 GB installed, only 2.5 were recognized).
  Configuration of the RAM after upgrading (physical)
  Slots 1-4: 1 GB each
  Configuration of the BIOS:
  Slot SCHEDULES 1,2 & 4: 1 GB in each slot
  SLOT 3: 512 MB (even if it has 1 GB installed in this slot)

  You seem to have a hardware failure with slot 3. See if there is an update to the BIOS of your card mother, but don't hold your breath. There may not be one and he will probably not correct the problem if there is.

  There is always to be small amount of RAM allocated to the system. Integrated video will be stick like a leech some as well as the network interface card. It's normal, regardless of the version of the installed operating system bit...

• Satellite C660 / 03C does not start after upgrading RAM

  Has decided to upgrade my lappy missed at 4 GB and bought 2 x legend 2 GB L256483J - 16 (2 x 2 GB DDR3 - 1333) chip and will not go beyond bios.

  Put the dirty old standard 2 GB Samsung PC3 - 10600 S-09-10-222 back in and works fine. Then put 1 legend of 2 GB and it works and reads the 4 GB of memory.

  Why it won't work with 2 chopsticks legend?

  > Why it won't work with 2 chopsticks legend?
  I'm afraid there is a compatibility issue of Mr. to avoid these problems, use recommended, tested and compatible memory modules.

  My advice to you is the use of modules from Kingston. The right one, you can find HERE.

• Satellite P10 504 does not start after upgrading RAM

  I just sticks of 2 x 1 GB of DDR 400 soddim and no start.
  After reading on what I could find on similar models, now seems that these older laptops cannot manage that fast of ram?

  With the help of some 266 DDR would be more appropriate?

  Hello

  If the computer laptop doesn't boot then there is a great chance that the RAM is either not compatible or it s faulty.
  I think that it s is not compatible.

  I found this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7090&ft=m&St=3

  According to this page the P10 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * bars!

  If your RAM is not compatible!

• Re: Satellite A105-S2061 does not start after upgrading RAM

  Hello activity

  I recently bought two RAM sticks of 1 GB for my laptop upgraded from 512 MB to 2 GB.
  I turned my computer off and pulled out the old RAM and put in 2 GB sticks. I then turned on the computer.

  The computer seems to boot up normally, but all the time he needs to just showed the start TOSHIBA computer screen is turned off.
  The screen never shows anything... it just stops. Several attempts donnГ the same result. I put in one.

  There could be only one explanation.
  The new RAM modules are not compatible, or there is a power outage!

  I guess that the laptop starts properly using older modules. Am I wrong?
  Well, I think you should simply replace the modules with one another!

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index