Re: Impossible to turn on the Satellite A110-275

Similar Questions

• On the problem of the Satellite A110-275 card reader

  Hey

  Ive had a bit of trouble with my card on my A110-275 reader. Whenever I put an SD card, the light flashes to say he recognizes her, but no matter what I can't seem to load.

  I know that's not the card because my father has a similar laptop and I have no problem whatsoever with his.

  I was wondering if it could be the drivers? Anyone got any info on the place where to download?

  [Thanks:]

  Hello

  Satellite A110 is old enough laptop model. Since when did you notice this problem with an SD card? Have you tested with different SD cards (different capacities)?

• Satellite A110-275 - is it compatible with Windows 7 or not?

  Hello

  I would like to know, is the Satellite A110-275 for computer laptop windows 7 compatible? I can't see this series in the Web of Toshiba site "Download Windows 7 drivers".

  If not, is it possible, that it could be made compatible?

  Thanks for your help.

  Raja

  Hello

  To be honest, I don't know if it's compatible, but as I know that most Vista drivers work fine with 7 too.

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Replacing the HARD drive on the satellite A110-252

  I'm looking for a replacement of the hard drive for my laptop and I don't know which are compatible.

  I understand that I need a 2.5 "internal HDD, size 7 cm x 10 cm x 9.5 mm

  However the confusion for me is above the interface, I think I understand it, is that it is a SATA interface - this correct?

  .. and if so, I noticed there are SATA-150, SATA-300 & SATA II HDD, you or the other of these works to the machine?

  Is this all I should which is not compatible with the laptop, for example rotation speed, he search speed, maximum size, manufacturers etc.?

  Thank you very much

  Dougie

  Hi Douglas

  I understand you very well. Sometimes I m also very confused because the entire designations in the laptop world
  In any case, during the search on the net I found useful information on the compatible HARD drive for your laptop.

  It seems that the satellite A110-252 support SATA (serial ATA) 1.5 G interface. Most compatible hard drives support a rotational speed of 5400 RPM and that is why I recommend buy HARD drive 5400 RPM

  The laptop comes with 60 GB HARD drive. Am I wrong? I think generally you should be able to use a 80, 100 and 120 GB HDD without any problem.

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• Satellite A110-275: digital recording of cassettes

  I have a Sat Pro A110-275. Nothing else added. Can someone tell me how I can use it to record tapes to a digital format? What should I buy material additionl / software?

  See you soon

  Kilfinnan

  Hello

  Are you sure it's a Satellite Pro A110-275 and not Satellite A110-275?
  I found only a Satellite A110-275!

  In addition the tapes you want to turn into a digital format?
  VHS or audio only?

  As far as I know this device supports only a tv out port. In this case, you are only able to send a signal to TV but do not receive all the signals.
  In my opinion you will need a 3rd party card PCMICA or any device which is capable of receiving video or audio signals (to jack)

• Cannot start my Satellite A110-275

  Hello

  I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
  I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

  In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
  Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
  Could someone help me with some ideas?
  Thanks in advance.

  Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
  Thank you

  Hello Marina

  Please don't get me wrong, but I don't think there is that you can only do about it.
  Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

  It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

• Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

  Satellite A110-275
  Can I use the file system fat32 instead of ntfs disk recovery system.

  Hello

  Well, on the Toshiba Recovery CD you will find only the ghosts.
  This ghost files contains image with all the files and data from HARD drive.
  I guess that the image was made on NTFS.

  I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
  If you want to change the FAT32 file system, you must format the HDD to FAT32.

  But I put t know why you want to do. It makes no sense to me.
  In my opinion, the NTFS system is more powerful than FAT32

• Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

  Hello

  I am the owner of:
  Satellite A110-275
  Part number: PSAB0E-00T00TEN
  graphics card intel gma 945 up to 128 MB.

  Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
  After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

  also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

  Concerning
  Piter

  Hello Pit

  I posted my opinion that I don't think there could be a problem in your second topic.
  As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

  To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

  PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

• Satellite P10-504 - impossible to turn on the firewall

  Hi friends,

  I m unable to turn on my firewall, I get the widows message cannot start the firewall/internet connection sharing ics service. I have the Satellite P10 504 with WXP SP3.

  All ideas welcome

  Thank you
  Colin

  There are a few articles Microsoft Knowledge on this problem:

  [Some administrative of the Windows XP Security Guide templates can prevent you from starting the Windows Firewall service in Windows XP Service Pack 2: http://support.microsoft.com/kb/892199]

  [You cannot start the Windows Firewall service in Windows XP SP2: http://support.microsoft.com/kb/920074]

  Check both maybe you could solve using the workaround solution described in the present statutes

  Good luck

• Problem turning on the Satellite Pro S500 without battery

  Hello!

  I have the following situation with my Satellite Pro S500-115:

  The battery seems to be faulty now (it loads more and Win 7 Pro told me to replace it).
  When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  But even if I remove the battery and the laptop connected to the DC IN, when I press the turn on button have nothing happens!

  If the laptop should not be able to operate in such circumstances, which is only connected to the electric network and with the connected battery off? I have to set in order to operate like this?

  Thanks in advance!

  > The battery seems to be broken now (it loads more and Win 7 Pro told me to replace it).
  > When I turn on the laptop and the battery is connected, it works for a few minutes and then it suddenly off.

  My old laptop battery is dead too much 6 years It's possible to use the laptop in the dough mode for just two minutes after the battery is empty, but I use the notebook with the AC adapter connected and that is why I don't need to replace the battery.

  > Shouldn't the laptop be able to operate in such circumstances, that is only connected to the electric network and with the battery connected off? I have to set in order to operate like this?

  Usually the laptop should be able to turn on and operate without battery connected.
  My laptop works fine with an adapter connected only. So what to say maybe the ESF is also affected, but it's just a suggestion

  But you must check if the BIOS is in place to this day... sometimes a BIOS update could solve some problems of power and battery.

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• Screen Toshiba Innovation by turning on the Satellite P770

  Hello

  I have an older P770 of 2 weeks.
  Last week the laptop off itself all of a sudden.

  I was a very hot day - I don't know if this had anything to do with it? It seemed very warm.
  I put on the fan next to the laptop and realized the fan to the vents. I use the laptop on a table. When I turned it on I got the Toshiba Innovation screen and down the bottom it says press to enter together to the top or enter the boot menu.

  I press F2, nothing happens. I press F12, nothing happens. I press CTRL F2 F2 SHIFT, ALT F2, etc. etc. etc.
  I gave up and turned off the laptop has waited a while and turn it back on.
  I did it a couple of times and finally he went into what looked like to the start menu and I followed the instructions.

  Now, this happened to me a few times in the last 2 weeks-, but only when I completely stop the day before.

  Now her he does not again this morning and its driving me crazy. Help, please!

  There is an entry in the Knowledge Base of Toshiba by updating the bios as of 16/02/12 about the improved satellite fan control (not given models) and there is an update of bios v1.8 dated 14 / 02 / 12. What is the solution?