Satellite A110 - combability memmory RAM

Hello!

I recently bought GOODRAM SO - DIMM DDR - 2 1 GB/667 MHz and it works fine, but the problem is with the old RAM (512 MB), which was originally installed in the laptop (Satellite A110 (PSAB6)).
BIOS does not see the old man of the RAM, I have not now why, maybe it's because the old man is slower (533 MHz).
Now I have 1 GB rather 1.5 GB.
What can I do to solve this problem, there may be a few things (change this feture CL in RAM or sth)?
I tried to change the memory banks and update the BIOS to version 1.50.
Please help because it is so boring!

BR

Maybe you need to use two identical RAM modules and not two with the different front side bus speed.

Tips are not known to me but only logic explanation to use tested compatible RAM memory modules. One more thing: Please do not think that it will work more quickly when you use RAM with more MHz.

Tags: Toshiba

Similar Questions

  • Satellite A110-115 and RAM update

    Hello

    I have a Satellite A110-115 with 2x512Mb RAM installed. I removed the and installed 2x1GB PC2-5300 667 Mhz (Kingston KVR667D2S5 / 1 G), but when the PC boots it go to BSOD and begins to start again.

    I tried with one only new memory cards, but with the same results. I know that the old RAM PC2-4200 533 Mhz but I think it should work with 667 Mhz as well?

    Anyone who knows what's the problem here?

    It's nice that you believe this, but the fact is that you must use compatible modules.
    Use maximum 2 GB of RAM I recommend you to use compatible DDR2 400/533 module 1 GB (PA3411U-1M1G).

  • Satellite A110-103 - 2 GB RAM - gaming performance optimization - SOLUTION

    Hello

    For those of you who have 2 GB of RAM installed on the laptop and want to play games like f.e.a.r.2 PROJECT ORIGIN, it's performance that I have tested on my Toshiba Satellite A110-103!

    If you want to add 2 GB of RAM or more to your laptop please read [this post and my experience with upgrades RAM | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153005#153005]! It could help you save money!

    Before you install the 2 GB of RAM, I used to have a paging file 4096 defined in Windows for drive C.
    After that I installed the 2 GB of RAM, I wanted to play f.e.a.r.2 Project Origin on low heat.
    However, the game played horrible with low display rate. So I wanted to know if there is a way to disable virtual memory (swap file) and only use real RAM.

    Most of the discussions about the paging files disabling said it there is no way or point by doing this!
    Well, I decided to give it a try!

    I disabled the paging file to * start-> Control Panel - > system-> advanced-> performance-> settings-> advanced-> virtual memory - > Exchange-> no paging file *. I restarted my laptop and after the reboot in my case I could see the big difference in speed!

    TEST: I opened FEAR2 - Project Origin started playing and my character's movement, where much more receptive and lag-free! : D

    Conclusion: In my case disable virtual memory (swap file) really boosted my gaming experience! And I play on an ATI X200M with 256 MB shared memory card!
    Try this and if you get good results please post them here! I have

    Best regards
    Marius Gigi

    Hi dude

    Thanks for this message
    Usually the pagefile should help you increase the performance of RAM
    USIN the page file, the data that must be stored in RAM would be transferred to the HARD disk and therefore a pieces of RAM would be free

    However, thank you for this return of experience and your comments!

  • Satellite A110-195 - Ram upgrade questions

    Hello

    I have Toshiba Satellite A110-195

    My questions are:
    (1) what is the maximum size of ram per slot, 1 GB or 2 GB?
    I have 2 cylinders on my laptop right now 512 MB each. Am I able to replace one of them with a ram of 2 GB?

    (2) right now on my laptop I have DDR2 [PC2-4300] Rams.

    Any SoDimm DDR2 ram working?
    Either the ram DDR2 and exactly PC2-4300.

    Laptop supports the Mobile IntelĀ® 945GM Express Chipset
    http://Ark.Intel.com/products/27857/Intel-82945GM-graphics-and-memory-controller

    According to the Intel page, the chipset handles max 4 GB RAM.
    This means that you can use 2 x 2 GB RAM or 4 GB RAM module.

    The chipset supports DDR2-400 / DDR2-533 / modules of RAM DDR2-667

  • Satellite A110-174 - RAM upgrade questions

    Hello

    I have a Satellite A110-174

    I want to buy a RAM module (it uses ddr2 ram, 533 MHz), but it seems impossible, in view of their.
    I can only find the frequencies of 800 or higher.

    I can use them or they give me problems / incompatibilities?

    Can I mount 1 module or to buy 2 modules?

    The motherboard will read up to 4 GB or need a Bios Update?

    Thank you

    Satellite A110-174 can be upgraded up to 4 GB of RAM.

    In order to use a feature of dual channel RAM, two modules must be used.
    This means module of RAM 2 GB in each slot.

    The 4 GB RAM limit is caused by Mobile Intel 945 GM Express chipset
    http://Ark.Intel.com/de/products/27857 as well as the Intel Core CPU T1350 http://ark.intel.com/de/products/27243
    The processor supports the 533 Mhz FSB (front side bus) and the RAM modules will run max at 533 Mhz.

    Thus, you should use the DDR2-533 modules

    But sometimes, you should be able to use the DDR2 - 667 Mhz modules. In this case the 667 Mhz speed module will be clocked at 533 Mhz

  • My Satellite A110-180 always do a RAM test

    Hello.

    I can't allow a quick start (start without the RAM test) in my cell A110-180. I upgraded my RAM from 1 GB to 3 GB and I would like to disable the standard ram test when the laptop starts up because now becomes very slow. I've updated the original Bios HTW20 V1.30 for Bios HTW20 V2.00 but in the new does not have this option either.

    Can you help me?.

    Thanks in advance.

    > I upgraded my RAM from 1 GB to 3 GB and I would like to disable the standard ram test when the laptop starts up because now becomes very slow.
    How does something like this happen?
    After RAM upgrade boot is actually not different as before. Portable operations are faster.

    Can you please tell us which module RAM do you have used for the upgrade?
    I checked the laptop computer's specification and memory modules compatible RAM for your Satellite A110 are:
    1 GB-PA3411U-1M1G
    2GB - PA3513U-1M2G

  • Upgrade RAM not recognized by satellite A110

    I have a satellite A110-137 Partnr. PSAB6E-00Z013N5

    I use win7 on this computer because it is more stable.
    I upgraded my memory to 2048Mb yesterday, but the computer will not register more than one chip 1024Mb.

    I tried to use chips in different locations, but no response. It's ok if I insert one 1024 + 512 which is to different brands of chips but ok.
    Then what should I do?

    On the side of the download, there is an upgrade of the bios, but only for Vista.
    Please help me I'm lost in this mater.

    Arild

    >.. .computer will not register more than one chip 1024Mb.
    Is that what you saw in the BIOS settings?

    Are you sure you are using the compatible RAM modules?

  • Question about Ram upgrade on a machine Satellite A110

    Hello

    I wonder if I can replace my 512 MB PC 4200 Mhz SO - DIMM DDRII with a 2 GB PC 5300 Mhz SO - DIMM DRRII I to my Satellite A110?

    Thanks in advande.

    / Mattias

    The laptop can be upgraded up to 2 GB. You can use the module of RAM 1 GB max in a memory slot!

    The laptop seems to support FSB 533 MHZ and so I should be possible to use the 533 Mhz memory modules too

  • Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

    {color: #000000} Dear Forum Toshiba,

    I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
    I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
    I tried to upgrade the RAM to its maximum capaity supported 2 GB.
    I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

    in the BIOS, I see only 1 GB of RAM.
    I tested each RAM separately and they work very well. The problem is that when I install in my

    locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

    version 1.70 (for XP), but the laptop continues to show only 1 GB.

    I tested the RAM separately:
    -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
    -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
    - then I checked another unit of the RAM in the same way and worked well
    -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
    -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
    - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

    Here's the description detailed 1 GB modules that I try to install:

    SLOT #1
    The module size: 1024
    Band Max bandwidth: PC2-4300(266Mhz)
    Manufacturer: Kingston
    Reference number: 9905293 - 0.14A00LF
    Serial number: 6ACC0C46
    Frequency: 200-266
    CASE # standby time: 3,0-4,0
    RAS # for CASE #: 3-4
    Tras:9 - 12
    TRC: 12-16
    Voltage: 1, 8V - 1, 8V

    SLOT #2
    The module size: 1024
    Band Max bandwidth: PC2-4300(266Mhz)
    Manufacturer: Kingston
    Serial number: AD0CCE10
    Frequency: 200-266
    CASE # standby time: 3,0-4,0
    RAS # for CASE #: 3-4
    Tras:9 - 12
    TRC: 12-16
    Voltage: 1, 8V - 1, 8V

    What should I do?
    Help, please!

    It IS concerning.
    Marius Militarescu

    [email protected]

    {color}

    I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

    In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

    I think that there is no other way because you have updated your BIOS to the latest version.
    Here is the part number for RAM Toshiba compatible:
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

  • Issue of satellite A110 - 195 Ram upgrade

    Magalie everyone I need to ask a critical question on my Toshiba laptop model name: satellite a110-195, nude model: psaboe.

    1. I'm a Ram with Buss 533 512 MB DDR2, if I changed it to Buss 667 2 GB of Ram it downgrade to 533 buss works well & not cuz disorders & being stable in my laptop or not?

    2 - What is the maximum Ram sizes & bus which can my laptop deals with it?

    Please review quickly because I have problems in Rams upgrades thx

    Post edited by: lover of matrix

    Hello

    Say the user manual on the upgrade of RAM?
    In general this info is always mentioned in the user manuals

    But generally, must be knowing that RAM upgrade depends on the chipset.
    The FSB (front side bus) chipset is important for the speed of the RAM.
    If the FSB supports only 533 Mhz then your RAM modules would go max with speed 533 Mhz and RAM modules support a faster speed; That is to say to 667 Mhz.

  • Satellite A110-153: RAM upgrade Question

    Hello

    I am the proud owner of a Toshiba Satellite A110-153 I've had for a few years.
    I am interested in the upgrade of RAM but stumbled upon this controversy.

    1 internal memory expansion module sizes are 256, 512, 1024 MB.
    2. maximum speed of the internal memory is 4 GB
    3. 2 memory slots.

    Now, I would like to upgrade my laptop to the maximum 4 GB of RAM, but how can I do that when I'm not allowed to use 2 x 2 GB modules?

    Is it humanly possible to upgrade my laptop to 4 GB?

    Thanks for the time.

    William.

    Hello

    If you want to upgrade the RAM to 4 GB max you can use modules of 2 x 2 GB RAM!

    The laptop must manage the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules

    But note; the 4 GB of RAM can be used by the 64 bit OS!
    Win XP or Vista 32 bit would recognize as 3.2 GB!

  • Upgrade of RAM for Satellite A110-274

    Hello

    I have a laptop Toshiba Satellite A110-274 currently with 2 x 512 MB (1 GB) of RAM.
    What is the best/most RAM upgrade (i.e. 2, 3, 4 GB) I can buy?

    Your laptop can handle with 4 GB of RAM, you can buy 2 x 2 GB.
    HERE the list compatible modules from KINGSTON.

  • Driver DVD-RAM on Satellite A110-149 problem

    I recently received my copy of Express Upgrade to Windows Vista and I installed it as described in the user guide.

    The first time Windows Vista ran normally and I had no problem with my DVD-RAM. But then, after having upgraded from windows it asked me to reboot. When I rebooted my computer Windows Vista does not recognize the DVD-RAM driver.

    I searched the Web from Toshiba site, this driver but I couldn't find it. I just find drivers Windows XP, which could not be installed.

    Do you have anyone had the same problem, or knows where I can get this driver?

    My laptop is a Satellite A110 - 149 (PSAB6E) and the DVD-RAM is a CARPET * a DVD-RAM UJ - 841S

    Hello

    usually, a DVD-RAM needs no driver, it must be recognized automatically. Have you ever tried to remove the drive in system properties and restart the system?

    Windows should install correctly after that. If this isn't the case, please make a comment.

    Welcome them

  • Satellite A110-195 shows only 3 GB of RAM

    Hello

    Last week I bought laptops SATELLITE A110-195 and memory KINGSTON KVR533D2S4 / 2G to expand memory to 4 GB, I want to have 4 GB, but after putting is computer shows 3 GB not 4 GB. Could you help me?
    Why shows 3 GB not 4 GB?

    Please see this site:

    http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

  • Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

    Hello

    I am the owner of:
    Satellite A110-275
    Part number: PSAB0E-00T00TEN
    graphics card intel gma 945 up to 128 MB.

    Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
    After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

    also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

    Concerning
    Piter

    Hello Pit

    I posted my opinion that I don't think there could be a problem in your second topic.
    As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

    To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

    PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

Maybe you are looking for