My Satellite A110-180 always do a RAM test

Similar Questions

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!

• Satellite A110 - 180 PSABOE - Bios update failure

  Hello.

  I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

  If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

  Thanks for your help.

  > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

  To me, it looks like the BIOS update procedure has no
  I'm afraid you have no other alternative besides contacting an ASP using m.

  It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

  I would recommend contacting the local ASP in order to solve this problem

• Satellite A110-180: command buttons open wrong applications

  Before I installed Microsoft Office 2003 buttons did work. But since I installed internet button explore runs word and others run excel. Toshiba controls configuration is correct (pre-determined ones).

  I uninstalled the application of controls of Toshiba and installed a new I download drivers section. I've desinstalled office and re-installed and I have the same problem.

  How could I solve this problem please?

  Thanks in advance.

  Try to reconfigure these controls.
  As far as I know it of possible to assign any application to this button.
  Go to the Toshiba control utility, configure the buttons of singles with different programs.

  Is it possible to assign different programs and only the excel and word?

  Check it out

• Satellite A110-180: How can I change the layout of the keyboard?

  Hello

  I hope I could help you guys

  I reformatted my computer and install a windows xp OS... the placement of my keys looked like the standard keyboard...

  How can it go back to its own décor... because im confused with the keys every time I type.

  hoping for a quick answer. Thank you very much!

  Post edited by: spectrex909

  Hello

  Looks like you are using a wrong keyboard layout. Thin I language settings are bad!
  Maybe you have a US keyboard and the settings are set to the United Kingdom?

  Please check this in the dashboard-> regional and language-> languages-> details options.
  Here, you can add a second language or you can change one to another provision of the keyboard.

• Satellite A110 ranging power off when it is hot

  My Satellite A110 is always turned off when it's hot.

  What is the problem? Mayby fan? Can I change this?

  Hello!

  You hear a fan noise?

  Maybe you should clean the laptop. For this, you can use compressed air jet and could blow the dust from the fan. You n t have to disassemble anything.

  And try to find out if the fan works.

  Good bye

• Issue of satellite A110 - 195 Ram upgrade

  Magalie everyone I need to ask a critical question on my Toshiba laptop model name: satellite a110-195, nude model: psaboe.

  1. I'm a Ram with Buss 533 512 MB DDR2, if I changed it to Buss 667 2 GB of Ram it downgrade to 533 buss works well & not cuz disorders & being stable in my laptop or not?

  2 - What is the maximum Ram sizes & bus which can my laptop deals with it?

  Please review quickly because I have problems in Rams upgrades thx

  Post edited by: lover of matrix

  Hello

  Say the user manual on the upgrade of RAM?
  In general this info is always mentioned in the user manuals

  But generally, must be knowing that RAM upgrade depends on the chipset.
  The FSB (front side bus) chipset is important for the speed of the RAM.
  If the FSB supports only 533 Mhz then your RAM modules would go max with speed 533 Mhz and RAM modules support a faster speed; That is to say to 667 Mhz.

• Satellite A110-103 - 2 GB RAM - gaming performance optimization - SOLUTION

  Hello

  For those of you who have 2 GB of RAM installed on the laptop and want to play games like f.e.a.r.2 PROJECT ORIGIN, it's performance that I have tested on my Toshiba Satellite A110-103!

  If you want to add 2 GB of RAM or more to your laptop please read [this post and my experience with upgrades RAM | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153005#153005]! It could help you save money!

  Before you install the 2 GB of RAM, I used to have a paging file 4096 defined in Windows for drive C.
  After that I installed the 2 GB of RAM, I wanted to play f.e.a.r.2 Project Origin on low heat.
  However, the game played horrible with low display rate. So I wanted to know if there is a way to disable virtual memory (swap file) and only use real RAM.

  Most of the discussions about the paging files disabling said it there is no way or point by doing this!
  Well, I decided to give it a try!

  I disabled the paging file to * start-> Control Panel - > system-> advanced-> performance-> settings-> advanced-> virtual memory - > Exchange-> no paging file *. I restarted my laptop and after the reboot in my case I could see the big difference in speed!

  TEST: I opened FEAR2 - Project Origin started playing and my character's movement, where much more receptive and lag-free! : D

  Conclusion: In my case disable virtual memory (swap file) really boosted my gaming experience! And I play on an ATI X200M with 256 MB shared memory card!
  Try this and if you get good results please post them here! I have

  Best regards
  Marius Gigi

  Hi dude

  Thanks for this message
  Usually the pagefile should help you increase the performance of RAM
  USIN the page file, the data that must be stored in RAM would be transferred to the HARD disk and therefore a pieces of RAM would be free

  However, thank you for this return of experience and your comments!

• Satellite A110-195 - Ram upgrade questions

  Hello

  I have Toshiba Satellite A110-195

  My questions are:
  (1) what is the maximum size of ram per slot, 1 GB or 2 GB?
  I have 2 cylinders on my laptop right now 512 MB each. Am I able to replace one of them with a ram of 2 GB?

  (2) right now on my laptop I have DDR2 [PC2-4300] Rams.

  Any SoDimm DDR2 ram working?
  Either the ram DDR2 and exactly PC2-4300.

  Laptop supports the Mobile Intel® 945GM Express Chipset
  http://Ark.Intel.com/products/27857/Intel-82945GM-graphics-and-memory-controller

  According to the Intel page, the chipset handles max 4 GB RAM.
  This means that you can use 2 x 2 GB RAM or 4 GB RAM module.

  The chipset supports DDR2-400 / DDR2-533 / modules of RAM DDR2-667

• Satellite A110-174 - RAM upgrade questions

  Hello

  I have a Satellite A110-174

  I want to buy a RAM module (it uses ddr2 ram, 533 MHz), but it seems impossible, in view of their.
  I can only find the frequencies of 800 or higher.

  I can use them or they give me problems / incompatibilities?

  Can I mount 1 module or to buy 2 modules?

  The motherboard will read up to 4 GB or need a Bios Update?

  Thank you

  Satellite A110-174 can be upgraded up to 4 GB of RAM.

  In order to use a feature of dual channel RAM, two modules must be used.
  This means module of RAM 2 GB in each slot.

  The 4 GB RAM limit is caused by Mobile Intel 945 GM Express chipset
  http://Ark.Intel.com/de/products/27857 as well as the Intel Core CPU T1350 http://ark.intel.com/de/products/27243
  The processor supports the 533 Mhz FSB (front side bus) and the RAM modules will run max at 533 Mhz.

  Thus, you should use the DDR2-533 modules

  But sometimes, you should be able to use the DDR2 - 667 Mhz modules. In this case the 667 Mhz speed module will be clocked at 533 Mhz

• Upgrade RAM not recognized by satellite A110

  I have a satellite A110-137 Partnr. PSAB6E-00Z013N5

  I use win7 on this computer because it is more stable.
  I upgraded my memory to 2048Mb yesterday, but the computer will not register more than one chip 1024Mb.

  I tried to use chips in different locations, but no response. It's ok if I insert one 1024 + 512 which is to different brands of chips but ok.
  Then what should I do?

  On the side of the download, there is an upgrade of the bios, but only for Vista.
  Please help me I'm lost in this mater.

  Arild

  >.. .computer will not register more than one chip 1024Mb.
  Is that what you saw in the BIOS settings?

  Are you sure you are using the compatible RAM modules?

• Question about Ram upgrade on a machine Satellite A110

  Hello

  I wonder if I can replace my 512 MB PC 4200 Mhz SO - DIMM DDRII with a 2 GB PC 5300 Mhz SO - DIMM DRRII I to my Satellite A110?

  Thanks in advande.

  / Mattias

  The laptop can be upgraded up to 2 GB. You can use the module of RAM 1 GB max in a memory slot!

  The laptop seems to support FSB 533 MHZ and so I should be possible to use the 533 Mhz memory modules too

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite A110-153: RAM upgrade Question

  Hello

  I am the proud owner of a Toshiba Satellite A110-153 I've had for a few years.
  I am interested in the upgrade of RAM but stumbled upon this controversy.

  1 internal memory expansion module sizes are 256, 512, 1024 MB.
  2. maximum speed of the internal memory is 4 GB
  3. 2 memory slots.

  Now, I would like to upgrade my laptop to the maximum 4 GB of RAM, but how can I do that when I'm not allowed to use 2 x 2 GB modules?

  Is it humanly possible to upgrade my laptop to 4 GB?

  Thanks for the time.

  William.

  Hello

  If you want to upgrade the RAM to 4 GB max you can use modules of 2 x 2 GB RAM!

  The laptop must manage the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules

  But note; the 4 GB of RAM can be used by the 64 bit OS!
  Win XP or Vista 32 bit would recognize as 3.2 GB!