Upgrade RAM not recognized by satellite A110

Similar Questions

• Satellite L20-153 - upgrade RAM not recognized

  Hi all

  I just put an extra 1 GB of RAM in my laptop so there should be 1 and a half GB in there now, but Windows only recognizes 896 MB. When I run pc Wizard it say to me that 1.5 is installed.

  Any ideas why Windows XP won't see it, I updated the BIOS and most of the other systems, any help would be appreciated.

  see you soon,

  Hey Buddy,

  If PC Wizard recognizes the two RAM modules, I think that more RAM is used for the graphics card and other device devices (shared memory).

  Just to be sure, can look in the BIOS the amount of RAM is it recognized? 1.5 GB of RAM, if recognized, everything is ok!

• upgrade RAM not recognized by BIOS

  I have a pavilion dv6t-3100 Entertainment series that I had upgrade the system RAM to 8 GB to 16 GB.  The system startup stops but so too demand placed on the system.  I see that the BIOS didn't recognize the 16 GB but running system and another diagnosis tools to see all the 16 GB.  My question is how do BIOS to recognize the 16 GB of physical RAM?  Should I Flash a BIOS newer or even force him to re - initialize or is it a key sequence / start that will solve this problem?  I hate to give up the extra RAM without a fight.  Thank you, jwillar

  All indications are that the system tops out at 8 GB of RAM. You try to stuff 20 pounds of sugar in a 10-pound bag. It is not entirely the BIOS but also material of the motherboard which imposes the limit. It wouldn't do any good to Flash the BIOS, but it can't hurt. I wouldn't try to do it with 16 installed concerts; who would be in trouble. It starts at 8 GB and I mean 2 x 4 GB not just remove a module.

• RAM is not recognized on Satellite L650-1MC

  Hello guys

  I have a Toshiba Satellite L650-1MC with an i5 480M CPU and 4 GB DDR3 PC3 - 10600 (2 x 2 GB modules). Today, I got a 4 GB of DDR3 PC3-8500 module to upgrade the RAM 6 GB. I put this new module in and he was not recognized, perhaps because it was PC3-* 8500 * not * 10600 * like the original other two modules.

  However, when I tried to put one of the modules of 2 GB DDR3 PC3 10600 original in once again, he was not recognized or the other! I then left the second empty slot, with nothing in it, and he acknowledged the 1 module 2 GB in there. Do you intend the PC3-8500 module "corrupt" the memory slot, or is it not positioned properly, as seems to be slotted into a fine; It will not move.

  I would really appreciate your help

  Tom

  Hello Tom

  There must be a compatibility problem. Forum is filled with similar reports. You should only use compatible and tested modules.
  I highly recommend to use modules from Kingston.
  Compatible RAM for your laptop model you can find on http://www.ec.kingston.com/ecom/configurator_new/lines.asp?root=uk&LinkBack=http :// www.kingston.com/ukroot&Manufacturer=tos&search_type=

  If you need assistance, you are prompted.

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• USB does not work on Satellite A110-294

  Hello

  I must first apologize because my English is not perfect, so I'll use simple words.

  A friend has a problem with its ports USB on a Satellite A110-294. I try to solve the problem, but without success until yet.
  I did a fresh install of windows XP with the toshiba installation CD, but it does not solve the problem. Then I try to remove usb devices in system properties, but there is a problem when I try to remove the usb host controller. System freez and nothing works no more! I remove hub root, but it works.

  I try to download some difficulty for usb with SP2 problems, but the prob still here. I saw there are some updates to INF files for some chipset intel but it is impossible to find the update intel celeron chipset. Update the BIOS to 1.70 and no result.

  I try to look for some drivers for the motherboard of toshiba but I can't find anything.

  What can I do to fix this?

  Satellite A110-294 belongs to the series of PSAB6E.

  On the Toshiba site, you won't find a chipset driver because it s built into the display driver for this model (chipset). You don't need a driver chipset Intel, this laptop has an ATI graphics chip and chipset.

  Then try to update the display driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Network controller is not recognized on Satellite A100 Windows XP

  Hi all!

  I bought a Satellite A100 PSAAR and I did a clean install of Windows XP on it. I installed all the drivers in the correct order (downloaded from the support page) but I still have a problem:

  Ethernet controller and network controller appear with a yellow exclamation point in Device Manager, and they are not recognized. I have downloaded the driver lan and I managed to do recognize the ethernet controller. However no matter how hard I tried, I can't find the correct driver for the NETWORK CONTROLLER, which still appears in Device Manager in yellow color.

  I really could use any help here... Thank you in advance.

  Hello

  Shouldn´t be a big problem to get some drivers for your machine's real lan. Just go here:

  http://www.Intel.com

  and download the intel proset for ethernet controller. If you didn t already installed the wireless card, do so. Otherwise the other network controller could be the bluetooth adapter.

  It would be nice to hear from you...

  See you soon

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.

• Gamepad - resource conflict do not accept the satellite A110

  Satellite A110 do not ACCEPT the JOY STICK. CONFLICT OF RESOURCE WITH THE MOTHER. BOARD OF DIRECTORS

  Hello

  I guess there is a resource conflict because the game port is not available on the device.
  So the joystick device tries to use the resources that are used or reserved for any other device.

  I wanted to use a joystick on my no Toshiba laptop, but it has not been possible.
  It was the same question as on your device. But I was able to use it on the desktop.
  I think that support doesn t use laptop a lot because of miniaturization and mobility Office PC port.

• Second FireWire PCMCIA card does not work on Satellite A110-178

  Hello!
  I tried to use the PCMCIA card as the second controller FireWire from different producers, but they can't take it.
  Sweex - PCMCIA Firewire kaart
  laptop computer en PCMCIA USB FireWire 1394 Combo CARDBUS

  I really need the second FireWire controller on my Toshiba Satellite A110-178.

  Thanks Ben

  Hello

  The Satellite A110-178 PSAB0E supports a Cardbus 32-bit / PC - Card 16-bit slot and you can ONLY use cards PCMCIA type II

  Please do not forget that your PCMCIA firewire card supports hardware specifications listed above.
  If not; you will need to purchase another compatible!

  Best regards

• Problem: Memory PCI Flash not recognized on Satellite M30X

  Hello

  Windows XP does not recognize my multicard reader. That he has still put memory PCI Flash not recognized (2 locations)

  I tried - uninstall the driver (and the camera) and reboot: does not work
  -install the cardbus driver: does not work either

  Have any hint?

  Mouk

  PS: Sorry for my bad English, I'm French ;)

  Hello

  Are you sure that the card is compatible with your laptop?
  As far as I know the card on the left site reader who, only available on some models, allows you to insert and read data from the SD card, smart media (SMM) MemoryStick pro, Multimedia card and XD picture cards.

  The PC card slot supports cards PCMCIA Type II

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?